| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
vduse: hold vduse_lock across IDR lookup in open path
vduse_dev_open() looks up struct vduse_dev through the IDR and then
acquires dev->lock only after vduse_lock has been dropped.
This leaves a window where a concurrent VDUSE_DESTROY_DEV can remove the
same object from the IDR and free it before the open path locks the
device, leading to a use-after-free.
Close this race by keeping vduse_lock held until dev->lock has been
acquired in the open path, matching the lock ordering already used by
the destroy path. |
| In the Linux kernel, the following vulnerability has been resolved:
net: serialize netif_running() check in enqueue_to_backlog()
Syzbot reported a KASAN slab-use-after-free in fib_rules_lookup().
The root cause is a race condition where packets can escape the backlog
flushing during device unregistration (e.g., during netns exit).
Commit e9e4dd3267d0 ("net: do not process device backlog during unregistration")
introduced a lockless netif_running() check in enqueue_to_backlog() to
prevent queuing packets to an unregistering device.
However, this creates a TOCTOU race window.
A lockless transmitter (like veth_xmit) can pass
the check before dev_close() clears IFF_UP. If the transmitter is then
delayed, flush_all_backlogs() can run and finish before the transmitter
grabs the backlog lock and queues the packet. The packet then escapes
the flush and triggers UAF later when processed.
Fix this by moving the netif_running() check inside the backlog lock.
This serializes the check with the flush work (which also grabs the lock).
We then either queue the packet before the flush runs (so it gets flushed),
or check netif_running() after the flush/close completes (so it gets dropped). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_dup_netdev: add nf_dev_xmit_recursion*() helpers and use them
Update nft_dup and nft_fwd to use the nf_dev_xmit_recursion() helpers.
This patch also disables BH when transmitting the skb to address a
possible migration to different CPU leading to imbalanced decrementation
of the recursion counters.
This is modeled after Florian Westphal's dev_xmit_recursion*() API
available since commit 97cdcf37b57e ("net: place xmit recursion in
softnet data") according to its current state in the tree. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: avoid stale FIFO cells during resize
snd_seq_fifo_resize() still needs to publish the replacement pool
before it waits for FIFO users. A blocking snd_seq_read() holds
f->use_lock while it sleeps, so concurrent senders must be able to
queue to the new pool and wake that reader instead of failing against a
closing old pool.
However, snd_seq_fifo_event_in() duplicates an event before it takes
f->lock, and snd_seq_read() can dequeue a cell and later call
snd_seq_fifo_cell_putback() if copy_to_user() or
snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches
oldhead in between, either path can relink an old-pool cell after the
snapshot. That stale cell sits outside the drained oldhead list, keeps
oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting
for the retired pool to drain.
Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(),
but reject stale cells before any FIFO relink. Revalidate event-in cells
under f->lock and retry them against the published replacement pool, and
free stale putback cells instead of linking them back into the FIFO.
The buggy scenario involves two paths, with each column showing the
order within that path:
resize path: relink path:
1. Allocate newpool. 1. Take f->use_lock.
2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool
detach oldhead. cell before oldpool closes.
3. Mark oldpool closing and 3. Reach a later relink point after
wait for FIFO users. resize published newpool.
4. Free oldhead and delete 4. Relink the old-pool cell after
oldpool. resize detached oldhead.
5. Drop f->use_lock.
The reproducer reports a resize ioctl blocked in the expected pool
teardown path:
signal: resize iteration=98 target_pool=4 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=651 wchan=snd_seq_pool_done
diagnostic: resize_tid=651 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
A second run with larger pools hit the same target path:
signal: resize iteration=32 target_pool=64 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=663 wchan=snd_seq_pool_done
diagnostic: resize_tid=663 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: clear sock_ops cb flags before force-closing a child socket
A child socket inherits the listener's bpf_sock_ops_cb_flags via
sk_clone_lock(). If its setup fails in tcp_v4_syn_recv_sock() /
tcp_v6_syn_recv_sock(), the child is freed through put_and_exit, where
inet_csk_prepare_forced_close() drops the socket lock and tcp_done() runs
without it.
If BPF_SOCK_OPS_STATE_CB_FLAG was inherited, tcp_done() -> tcp_set_state()
calls tcp_call_bpf(), which expects the lock and trips sock_owned_by_me():
WARNING: include/net/sock.h:1799 at tcp_set_state+0x433/0x550
RIP: 0010:tcp_set_state+0x433/0x550 include/net/sock.h:1799
Call Trace:
<IRQ>
tcp_done+0xba/0x250 net/ipv4/tcp.c:5095
tcp_v4_syn_recv_sock+0x850/0xa50 net/ipv4/tcp_ipv4.c:1787
tcp_check_req+0xf30/0x1360 net/ipv4/tcp_minisocks.c:926
tcp_v4_rcv+0x1047/0x1b50 net/ipv4/tcp_ipv4.c:2164
</IRQ>
The child is freed before it is ever established, so it should run no
sock_ops callback. Clear its cb flags in inet_csk_prepare_for_destroy_sock(),
the common point for the IPv4, IPv6 and chtls forced-close paths and for the
MPTCP ->syn_recv_sock() failure path (dispose_child), which reaches tcp_done()
on a child that was never established too. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix xfrm state cache insertion race
The xfrm input state cache insertion code checks the validity of
the state before acquiring the global xfrm_state_lock. Thus it's
possible for someone else to kill the state after it passed the
validity check, and then the insertion will add the dead state
to the cache.
Fix this by moving the validity check inside the lock.
This entire function is called on the input path, where BH must
be off (e.g., the caller of this function xfrm_input acquires
its spinlocks without disabling BH).
So there is no need to disable BH here or take the RCU read lock.
Remove both and replace them with an assertion that trips if BH
is accidentally enabled on some future calling path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix netfs_create_write_req() to handle async cache object creation
netfs_create_write_req() will skip caching if the fscache cookie is
disabled, but this is a problem because async cache object creation might
not have got far enough yet that has been enabled - thereby causing the
call to fscache_begin_write_operation() to be skipped.
Fix this by removing the checks on the cookie and delegating this to
fscache_begin_write_operation(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same
persistent_id race the fp->owner.name compare-read in
ksmbd_vfs_compare_durable_owner() against the kfree() in
ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a
standalone kstrdup() buffer whose lifetime is independent of the fp
refcount, and the two sites share no lock: the compare reads the buffer
while the reopen frees it, so the strcmp() can dereference freed memory.
Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in
ksmbd_reopen_durable_fd") made the fp->conn claim atomic under
global_ft.lock (closing the owner.name double-free and the ksmbd_file
write-UAF), but the compare-read versus reopen-free pair was left
unserialized.
BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80
Read of size 1 by task kworker
strcmp
ksmbd_vfs_compare_durable_owner
smb2_check_durable_oplock
smb2_open
Freed by task kworker:
kfree
ksmbd_reopen_durable_fd
smb2_open
Allocated by task kworker:
kstrdup
session_fd_check
smb2_session_logoff
The buggy address belongs to the cache kmalloc-8
Serialize both sides of the race with fp->f_lock. The global durable
file-table lock still protects the durable reconnect claim, but
fp->owner.name is per-open state and does not need to block unrelated
durable table lookups or reconnects. The teardown is left at its
existing location after the reopen-success point so that an __open_id()
rollback still retains owner.name for a later legitimate reconnect to
verify. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panthor: Always use the IRQ-safe variant when acquiring the fence lock
Since dma_fence objects can be shared with other subsystems, they may be
accessed from hardirq context in those drivers, and we have to take
that into account by also using the IRQ-safe variant when acquiring
the lock.
While at it, switch to the guard model. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (aspeed-g6-pwm-tach) Guard fan RPM calculation against divide-by-zero
Sashiko reports:
In the aspeed-g6-pwm-tacho driver, the aspeed_tach_val_to_rpm() function
calculates the fan RPM using the tachometer value. However, it does not
check if the tachometer value is zero before performing the division.
If the hardware reports a tachometer value of 0 (which can happen due to
an extremely fast pulse, a stuck edge, or a hardware glitch), the
calculated tach_div evaluates to 0. The subsequent call to do_div() with
tach_div as the divisor triggers a divide-by-zero exception, leading to
a kernel panic.
Check the divisor against zero to fix the problem. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: avoid untracked enable work
lowpan_enable_set() allocates a temporary work item and schedules
do_enable_set() on system_wq, then returns to debugfs. The debugfs active
operation has ended at that point, but the worker still executes module
text and manipulates enable_6lowpan and listen_chan.
bt_6lowpan_exit() removes the debugfs files and immediately closes and
puts listen_chan. It has no pointer to the queued work item, so it cannot
cancel or flush it before tearing down the state that the worker uses.
The buggy scenario involves two paths, with each column showing the order
within that path:
debugfs enable write module exit
1. lowpan_enable_set() allocates 1. bt_6lowpan_exit() removes
set_enable work the debugfs file
2. schedule_work() queues 2. bt_6lowpan_exit() closes
do_enable_set() and puts listen_chan
3. the write operation returns 3. module teardown can continue
4. do_enable_set() later runs
against stale state
Run the enable state transition synchronously in lowpan_enable_set()
instead. The simple debugfs setter can sleep, and this file already handles
the 6LoWPAN control write synchronously under the same set_lock. Once the
setter returns, debugfs removal covers the whole operation and exit can no
longer race with an untracked work item.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in do_enable_set+0x113/0x2e0
Workqueue: events do_enable_set [bluetooth_6lowpan]
The buggy address belongs to the object at ffff888109cb8000 |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_pedit: fix TOCTOU heap OOB write in tc offload
There is a TOCTOU race condition in flower lockless approach between sizing
a flow_rule buffer and filling it.
zdi-disclosures@trendmicro.com reports:
The cls_flower classifier operates with TCF_PROTO_OPS_DOIT_UNLOCKED
(fl_change runs without RTNL), while RTM_NEWACTION holds RTNL, so the
independent locking domains make the race reachable in practice. KASAN
confirms:
BUG: KASAN: slab-out-of-bounds in tcf_pedit_offload_act_setup+0x81b/0x930
Write of size 4 at addr ffff888001f27520 by task poc-toctou/312
The buggy address is located 0 bytes to the right of
allocated 288-byte region [ffff888001f27400, ffff888001f27520)
(cache kmalloc-512)
Note: The result is a heap OOB write attacker-controlled content into the
adjacent slab object (requires CAP_NET_ADMIN).
The fix introduces reading tcfp_nkeys under act->tcfa_lock in all places
using a new tcf_pedit_nkeys_locked() which replaces the old tcf_pedit_nkeys().
Additionally we close the remaining TOCTOU window between the sizing read and
the fill reads by more careful accounting.
Rather than silently truncating the key count, which leads to incorrect
action semantics offloaded to hardware and secondary OOB writes if
the remaining capacity is zero or consumed by prior actions, we enforce
remaining capacity checks and return -ENOSPC if the required space exceeds
the remaining capacity. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: Fix double unlock in nomem_d_alloc error path
When start_creating() fails and returns -ENOMEM, it has already
released the parent directory lock in __start_dirop():
static struct dentry *__start_dirop(...)
{
...
inode_lock_nested(dir, I_MUTEX_PARENT);
dentry = lookup_one_qstr_excl(name, parent, lookup_flags);
if (IS_ERR(dentry))
inode_unlock(dir); <-- Lock released on error
return dentry;
}
However, the nomem_d_alloc error path in cachefiles_get_directory()
unconditionally calls inode_unlock(d_inode(dir)) again, causing a
double unlock that corrupts the rwsem state.
This is a leftover from commit 7ab96df840e60 which replaced manual
locking with start_creating() but failed to update the nomem_d_alloc
path (while correctly updating mkdir_error and lookup_error paths). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix lack of locking around modifications of net->cells_dyn_ino
Fix the lack of locking around modifications of net->cells_dyn_ino by
taking net->cells_lock exclusively. This also requires to cell to be
removed from net->cells_dyn_ino in afs_destroy_cell_work() rather than in
afs_cell_destroy() as the latter runs in RCU cleanup context and sleeping
locks cannot be taken there. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/boot: Validate console=uart8250 baud rate to fix early boot hang
When the baud rate is empty, 0, invalid, or overflows to 0 when stored
as an int, the system will hang during early boot because of a division
by zero in early_serial_init().
Fall back to DEFAULT_BAUD when the resulting baud rate is 0 to prevent
an early system hang. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fail attrlist updates when the superblock is inactive
generic_shutdown_super() clears SB_ACTIVE before evicting cached inodes.
If eviction selects the fake inode for a base inode's unnamed
$ATTRIBUTE_LIST attribute, ntfs_evict_big_inode() drops the fake inode's
reference on the base inode while the fake inode is still hashed and marked
I_FREEING.
That iput can synchronously write back the base inode. The writeback path
may update mapping pairs and call ntfs_attrlist_update(), which
unconditionally calls ntfs_attr_iget() for the same $ATTRIBUTE_LIST fake
inode. VFS then finds the I_FREEING inode and waits for eviction to finish,
but the current task is still inside that eviction path, causing a
self-deadlock in find_inode().
Fix this by mirroring the teardown guard used by __ntfs_write_inode():
once SB_ACTIVE has been cleared, do not try to iget the attribute-list
fake inode. Return -EIO so teardown aborts the update instead of waiting on
the inode it is evicting. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: nv: Re-translate VNCR before injecting abort
KVM faults in the VNCR page with FOLL_WRITE whenever the guest aborts
for a write, similar to how a regular stage-2 mapping is handled. It is
entirely possible that the guest reads from the VNCR before writing to
it, in which case the PFN could only be read-only.
Invalidate the VNCR TLB and re-fetch the translation upon taking a VNCR
abort, allowing the host mapping to be faulted in for write the second
time around. Interestingly enough, this also satisfies the ordering
requirements of FEAT_ETS2/3 between descriptor updates and MMU faults. |
| In the Linux kernel, the following vulnerability has been resolved:
sunrpc: wait for in-flight TLS handshake callback when cancel loses race
When wait_for_completion_interruptible_timeout() in
svc_tcp_handshake() returns 0 (timeout) or -ERESTARTSYS (signal) and
tls_handshake_cancel() then returns false, handshake_complete() has
won the cancellation race: it has set HANDSHAKE_F_REQ_COMPLETED and
is about to invoke svc_tcp_handshake_done(), but the callback's
side effects on xpt_flags and on svsk->sk_handshake_done have not
yet committed.
The current code reads xpt_flags immediately to decide whether the
session succeeded. Two races result.
If the callback has executed set_bit(XPT_TLS_SESSION) but not yet
clear_bit(XPT_HANDSHAKE), svc_tcp_handshake() sees a session,
enqueues the transport, and returns. svc_xprt_received() then
clears XPT_BUSY, a worker thread picks the transport up, the
dispatcher in svc_handle_xprt() observes XPT_HANDSHAKE still set,
and xpo_handshake is invoked a second time. That svc_tcp_handshake()
calls init_completion(&svsk->sk_handshake_done) while the original
callback concurrently calls complete_all() on it, corrupting the
embedded swait_queue.
If the callback has set HANDSHAKE_F_REQ_COMPLETED but not yet
entered svc_tcp_handshake_done(), svc_tcp_handshake() reads
XPT_TLS_SESSION as clear and tears the connection down even though
the handshake is about to succeed.
Wait for the callback to commit before inspecting xpt_flags. The
completion is guaranteed to fire because handshake_complete()
invokes svc_tcp_handshake_done() unconditionally once it has set
HANDSHAKE_F_REQ_COMPLETED. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Free arena sub-allocations on discover_arenas() error path
Memory allocated by btt_freelist_init(), btt_rtt_init(), and
btt_maplocks_init() is not freed on some discover_arenas() error
paths. This leaks memory when arena discovery fails.
Add the missing kfree() calls to release the allocations before
returning an error.
[ as: commit message and log edits ] |
