| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: Fix error pointer dereference
The function brcmf_chip_add_core() can return an error pointer and is
not checked. Add checks for error pointer.
Detected by Smatch:
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1010 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1013 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1016 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1019 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
drivers/net/wireless/broadcom/brcm80211/brcmfmac/chip.c:1022 brcmf_chip_recognition() error:
'core' dereferencing possible ERR_PTR()
[add missing wifi: prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/sun4i: backend: fix error pointer dereference
The function drm_atomic_get_plane_state() can return an error pointer
and is not checked for it. Add error pointer check.
Detected by Smatch:
drivers/gpu/drm/sun4i/sun4i_backend.c:496 sun4i_backend_atomic_check() error:
'plane_state' dereferencing possible ERR_PTR() |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_ldisc: Clear HCI_UART_PROTO_INIT on error
When hci_register_dev() fails in hci_uart_register_dev()
HCI_UART_PROTO_INIT is not cleared before calling hu->proto->close(hu)
and setting hu->hdev to NULL. This means incoming UART data will reach
the protocol-specific recv handler in hci_uart_tty_receive() after
resources are freed.
Clear HCI_UART_PROTO_INIT with a write lock before calling
hu->proto->close() and setting hu->hdev to NULL. The write lock ensures
all active readers have completed and no new reader can enter the
protocol recv path before resources are freed.
This allows the protocol-specific recv functions to remove the
"HCI_UART_REGISTERED" guard without risking a null pointer dereference
if hci_register_dev() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
dm cache: fix null-deref with concurrent writes in passthrough mode
In passthrough mode, when dm-cache starts to invalidate a cache
entry and bio prison cell lock fails due to concurrent write to
the same cached block, mg->cell remains NULL. The error path in
invalidate_complete() attempts to unlock and free the cell
unconditionally, causing a NULL pointer dereference:
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 UID: 0 PID: 134 Comm: fio Not tainted 6.19.0-rc7 #3 PREEMPT
RIP: 0010:dm_cell_unlock_v2+0x3f/0x210
<snip>
Call Trace:
invalidate_complete+0xef/0x430
map_bio+0x130f/0x1a10
cache_map+0x320/0x6b0
__map_bio+0x458/0x510
dm_submit_bio+0x40e/0x16d0
__submit_bio+0x419/0x870
<snip>
Reproduce steps:
1. Create a cache device
dmsetup create cmeta --table "0 8192 linear /dev/sdc 0"
dmsetup create cdata --table "0 131072 linear /dev/sdc 8192"
dmsetup create corig --table "0 262144 linear /dev/sdc 262144"
dd if=/dev/zero of=/dev/mapper/cmeta bs=4k count=1 oflag=direct
dmsetup create cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 writethrough smq 0"
2. Promote the first data block into cache
fio --filename=/dev/mapper/cache --name=populate --rw=write --bs=4k \
--direct=1 --size=64k
3. Reload the cache into passthrough mode
dmsetup suspend cache
dmsetup reload cache --table "0 262144 cache /dev/mapper/cmeta \
/dev/mapper/cdata /dev/mapper/corig 128 2 metadata2 passthrough smq 0"
dmsetup resume cache
4. Write to the first cached block concurrently
fio --filename=/dev/mapper/cache --name test --rw=randwrite --bs=4k \
--randrepeat=0 --direct=1 --numjobs=2 --size 64k
Fix by checking if mg->cell is valid before attempting to unlock it. |
| In the Linux kernel, the following vulnerability has been resolved:
nexthop: fix IPv6 route referencing IPv4 nexthop
syzbot reported a panic [1] [2].
When an IPv6 nexthop is replaced with an IPv4 nexthop, the has_v4 flag
of all groups containing this nexthop is not updated. This is because
nh_group_v4_update is only called when replacing AF_INET to AF_INET6,
but the reverse direction (AF_INET6 to AF_INET) is missed.
This allows a stale has_v4=false to bypass fib6_check_nexthop, causing
IPv6 routes to be attached to groups that effectively contain only AF_INET
members. Subsequent route lookups then call nexthop_fib6_nh() which
returns NULL for the AF_INET member, leading to a NULL pointer
dereference.
Fix by calling nh_group_v4_update whenever the family changes, not just
AF_INET to AF_INET6.
Reproducer:
# AF_INET6 blackhole
ip -6 nexthop add id 1 blackhole
# group with has_v4=false
ip nexthop add id 100 group 1
# replace with AF_INET (no -6), has_v4 stays false
ip nexthop replace id 1 blackhole
# pass stale has_v4 check
ip -6 route add 2001:db8::/64 nhid 100
# panic
ping -6 2001:db8::1
[1] https://syzkaller.appspot.com/bug?id=e17283eb2f8dcf3dd9b47fe6f67a95f71faadad0
[2] https://syzkaller.appspot.com/bug?id=8699b6ae54c9f35837d925686208402949e12ef3 |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: Fix error pointer dereference
The variable tps->partner is checked for an error pointer and then if it
is, it sends an error message but does not return and then immediately
dereferenced a few lines below:
tps->partner = typec_register_partner(tps->port, &desc);
if (IS_ERR(tps->partner))
dev_warn(tps->dev, "%s: failed to register partnet\n", __func__);
if (desc.identity) {
typec_partner_set_identity(tps->partner);
cd321x->cur_partner_identity = st.partner_identity;
}
Add early return and fix spelling mistake in error message.
Detected by Smatch:
drivers/usb/typec/tipd/core.c:827 cd321x_update_work() error:
'tps->partner' dereferencing possible ERR_PTR() |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix NULL deref in map_kptr_match_type for scalar regs
Commit ab6c637ad027 ("bpf: Fix a bpf_kptr_xchg() issue with local
kptr") refactored map_kptr_match_type() to branch on btf_is_kernel()
before checking base_type(). A scalar register stored into a kptr
slot has no btf, so the btf_is_kernel(reg->btf) call dereferences
NULL.
Move the base_type() != PTR_TO_BTF_ID guard before any reg->btf
access. |
| Jenkins Pipeline: Groovy Plugin 4331.v9d06ed4658ff and earlier does not restrict the types that can be instantiated through the Pipeline Snippet Generator, allowing attackers to instantiate types related to job or system configuration other than Pipeline steps. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePack-CSharp's typeless deserialization includes MessagePackSerializerOptions.ThrowIfDeserializingTypeIsDisallowed(Type) as a safety check for dangerous types. The default implementation checks the outer type name, but it does not recursively inspect array element types or generic type arguments. As a result, a type that would be blocked directly can be wrapped inside an array or constructed generic type and pass the outer type check. The formatter machinery can then materialize formatters for the inner blocked type. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| MessagePack for C# is a MessagePack serializer for C#. Prior to 2.5.301 and 3.1.7, MessagePackReader.ReadDateTime() can allocate stack memory based on an attacker-controlled MessagePack extension length. In the slow path for timestamp extension parsing, the computed tokenSize includes the extension body length from the wire and is used in a stackalloc operation before the extension length is validated as one of the valid timestamp sizes. A very small payload can claim a large timestamp extension body and cause a stack allocation large enough to trigger an uncatchable StackOverflowException, terminating the host process. This vulnerability is fixed in 2.5.301 and 3.1.7. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: v: stop OGMv2 on disabled interface
When a batadv_hard_iface is disabled, its mesh_iface pointer is set to
NULL. However, batadv_v_ogm_send_meshif() may still dispatch OGMs via
batadv_v_ogm_queue_on_if() for interfaces that have since lost their
mesh_iface association. This results in a NULL pointer dereference when
batadv_v_ogm_queue_on_if() unconditionally calls netdev_priv() on the
now NULL hard_iface->mesh_iface to retrieve the batadv_priv.
It is necessary to ensure that the batadv_v_ogm_queue_on_if() checks that
it is using the same mesh_iface for which batadv_v_ogm_send_meshif() was
called. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: fix NULL deref in rds_ib_send_cqe_handler() on masked atomic completion
rds_ib_xmit_atomic() always programs a masked atomic opcode
(IB_WR_MASKED_ATOMIC_CMP_AND_SWP or IB_WR_MASKED_ATOMIC_FETCH_AND_ADD)
for every RDS atomic cmsg. But the completion-side switch in
rds_ib_send_unmap_op() only handles the non-masked opcodes, so a masked
atomic completion falls through to default and returns rm == NULL while
send->s_op is left set. rds_ib_send_cqe_handler() then dereferences the
NULL rm via rm->m_final_op, oopsing in softirq context. An unprivileged
AF_RDS sendmsg() of an atomic cmsg over an active RDS/IB connection
triggers it; on hardware that natively accepts masked atomics (mlx4,
mlx5) no extra setup is needed.
RDS/IB: rds_ib_send_unmap_op: unexpected opcode 0xd in WR!
Oops: general protection fault [#1] SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000190-0x0000000000000197]
RIP: rds_ib_send_cqe_handler+0x25c/0xb10 (net/rds/ib_send.c:282)
Call Trace:
<IRQ>
rds_ib_send_cqe_handler (net/rds/ib_send.c:282)
poll_scq (net/rds/ib_cm.c:274)
rds_ib_tasklet_fn_send (net/rds/ib_cm.c:294)
tasklet_action_common (kernel/softirq.c:943)
handle_softirqs (kernel/softirq.c:573)
run_ksoftirqd (kernel/softirq.c:479)
</IRQ>
Kernel panic - not syncing: Fatal exception in interrupt
Handle the masked atomic opcodes in the same case as the non-masked
ones: they map to the same struct rds_message.atomic union member, so
the existing container_of()/rds_ib_send_unmap_atomic() body is correct
for them. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: avoid NULL deref of conn->lnk in smc_msg_event tracepoint
The smc_msg_event tracepoint class, shared by smc_tx_sendmsg and
smc_rx_recvmsg, unconditionally dereferences smc->conn.lnk:
__string(name, smc->conn.lnk->ibname)
conn->lnk is only set for SMC-R; for SMC-D it is NULL. Other code on
these paths already handles this (e.g. !conn->lnk in
SMC_STAT_RMB_TX_SIZE_SMALL()). With the tracepoint enabled, the first
sendmsg()/recvmsg() on an SMC-D socket crashes:
Oops: general protection fault, probably for non-canonical address
KASAN: null-ptr-deref in range [...]
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
trace_event_raw_event_smc_msg_event (net/smc/smc_tracepoint.h:44)
smc_rx_recvmsg (net/smc/smc_rx.c:515)
smc_recvmsg (net/smc/af_smc.c:2859)
__sys_recvfrom (net/socket.c:2315)
__x64_sys_recvfrom (net/socket.c:2326)
do_syscall_64
The faulting address 0x3e0 is offsetof(struct smc_link, ibname),
confirming the NULL ->lnk deref. Enabling the tracepoint requires
root, but the trigger itself is unprivileged: socket(AF_SMC, ...) has
no capability check, and SMC-D negotiation needs no admin step on
s390 or on x86 with the loopback ISM device loaded.
Log an empty device name for SMC-D instead of dereferencing NULL. |
| GPAC MP4Box v2.4 was discovered to contain a NULL pointer dereference in the gf_isom_add_track_kind() function at isomedia/isom_write.c. This vulnerability allows attackers to cause a Denial of Service (DoS) via a crafted MP4 file. |
| Unauthenticated Bypass Vulnerability in Best Payments Plugin for WP <= 4.6.19 versions. |
| Illustrator versions 29.8.6, 30.3 and earlier are affected by a NULL Pointer Dereference vulnerability that could result in an application denial-of-service. An attacker could exploit this vulnerability to crash the application, leading to a denial-of-service condition. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| NULL Pointer Dereference in GitHub repository vim/vim prior to 9.0.1531. |
| A flaw has been found in skvadrik re2c up to 4.4. Impacted is the function check_and_merge_special_rules of the file src/parse/ast.cc. This manipulation causes null pointer dereference. The attack can only be executed locally. The exploit has been published and may be used. Patch name: febeb977936f9519a25d9fbd10ff8256358cdb97. It is suggested to install a patch to address this issue. |
| Angular is a development platform for building mobile and desktop web applications using TypeScript/JavaScript and other languages. Prior to 22.0.1, 21.2.17, and 20.3.25, to optimize client-side bootstrap in Server-Side Rendered (SSR) environments, Angular supports Hydration via provideClientHydration(). During SSR, Angular serializes the application's runtime state (such as cached HttpClient responses) and outputs it into the HTML stream as a <script> tag with a predictable identifier. During client bootstrap, Angular recovers this state by looking up the element via document.getElementById('ng-state') and parsing its text content. Because the DOM element lookup for the state container is predictable and relies solely on the ID selector (ng-state), it is susceptible to DOM Clobbering. If the application binds untrusted user input or CMS content to element properties such as id (e.g., <div [id]="userInput"> or <a id="ng-state">) before the genuine <script> tag is parsed by the browser, the attacker-controlled element takes precedence in the DOM lookup. During hydration, when Angular calls document.getElementById('ng-state'), the browser returns the attacker's clobbered element. Angular then attempts to parse the text content or attributes of this clobbered element as JSON. This vulnerability is fixed in 22.0.1, 21.2.17, and 20.3.25. |
| There is a NULL pointer dereference vulnerability in NI grpc-device in the data moniker service that may allow an attacker to cause a denial of service by triggering a crash. Successful exploitation requires an attacker to provide an unknown value to the data moniker service. This affects NI grpc-device 2.17.0 and prior versions. |
