Export limit exceeded: 370356 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370356 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72354 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: avoid stale runlist element dereference in MFT writeback ntfs_write_mft_block() maps each $MFT record through the $MFT data runlist. For sub-folio clusters it looks up a struct runlist_element under ni->runlist.lock, drops the lock, and later uses rl->length and rl->vcn when choosing folio_sz. That pointer is only borrowed from ni->runlist.rl. Concurrent $MFT allocation extension can merge a replacement runlist under the same lock, and ntfs_rl_realloc() can free the old backing array. If that happens between the lookup and the later folio_sz decision, writeback can dereference freed runlist storage. The buggy scenario involves two paths, with each column showing the order within that path: MFT writeback path: $MFT allocation extension: 1. Look up rl under 1. Extend the $MFT data allocation. ni->runlist.lock. 2. Publish a replacement runlist. 2. Drop ni->runlist.lock. 3. Free the old runlist array. 3. Read rl->length and rl->vcn to choose folio_sz. Compute the remaining run length while ni->runlist.lock is still held, and use that scalar after unlock. This preserves the existing folio sizing decision without carrying a borrowed runlist_element across the lock boundary. Validation reproduced this kernel report: BUG: KASAN: slab-use-after-free in ntfs_mft_writepages+0x1c8d/0x1fb0 Call Trace: <TASK> dump_stack_lvl+0x66/0xa0 print_report+0xce/0x630 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? __virt_addr_valid+0x20d/0x410 ? ntfs_mft_writepages+0x1c8d/0x1fb0 kasan_report+0xe0/0x110 ? ntfs_mft_writepages+0x1c8d/0x1fb0 ntfs_mft_writepages+0x1c8d/0x1fb0 ? __pfx_ntfs_mft_writepages+0x10/0x10 ? __pfx___mutex_unlock_slowpath+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? iput+0x92/0xa80 do_writepages+0x219/0x530 ? __pfx_do_writepages+0x10/0x10 __writeback_single_inode+0x117/0xf50 ? do_raw_spin_lock+0x130/0x270 ? __pfx_do_raw_spin_lock+0x10/0x10 ? __pfx___writeback_single_inode+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 writeback_sb_inodes+0x65b/0x1810 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_acquire+0x2b8/0x2f0 ? __pfx_writeback_sb_inodes+0x10/0x10 ? lock_release+0x1e0/0x280 ? _raw_spin_unlock+0x23/0x40 ? move_expired_inodes+0x2b8/0x850 __writeback_inodes_wb+0xf4/0x270 ? __pfx___writeback_inodes_wb+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? queue_io+0x2e4/0x410 wb_writeback+0x666/0x880 ? srso_alias_return_thunk+0x5/0xfbef5 ? __pfx_wb_writeback+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? get_nr_dirty_inodes+0x1c/0x170 wb_workfn+0x75e/0xbb0 ? srso_alias_return_thunk+0x5/0xfbef5 ? _raw_spin_unlock_irqrestore+0x27/0x60 ? __pfx_wb_workfn+0x10/0x10 ? __pfx_debug_object_deactivate+0x10/0x10 ? lock_acquire+0x2b8/0x2f0 ? srso_alias_return_thunk+0x5/0xfbef5 ? lock_release+0x1e0/0x280 process_one_work+0x8d0/0x1870 ? __pfx_process_one_work+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 worker_thread+0x575/0xf80 ? __pfx_worker_thread+0x10/0x10 kthread+0x2e7/0x3c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x576/0x810 ? __pfx_ret_from_fork+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? __switch_to+0x57e/0xe10 ? __switch_to_asm+0x33/0x70 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 970: kasan_save_stack+0x33/0x60 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 __kvmalloc_node_noprof+0x353/0x920 ntfs_rl_realloc+0x3c/0x80 ntfs_runlists_merge+0x1212/0x3010 ntfs_mft_data_extend_allocation_nolock+0x3e0/0x1f40 ntfs_mft_record_alloc+0x1ab4/0x4f10 __ntfs_create+0x680/0x2e50 ntfs_create+0x1e6/0x3a0 path_openat+0x2b55/0x3c10 do_file_open+0x1f4/0x460 do_sys_openat2+0xde/0x170 __x64_sys_openat+0x122/0x1e0 do_syscall_64+0x115/0x6a0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 1294: kasan_save_ ---truncated--- | ||||
| CVE-2026-72420 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: md/raid5: avoid R5_Overlap races while breaking stripe batches KCSAN report a race in break_stripe_batch_list() vs. raid5_make_request() on sh->dev[i].flags (plain word write vs. atomic bit op).. and .. one possible scenario is: CPU1 CPU2 break_stripe_batch_list(sh1) -> handle sh2 -> lock(sh2) -> sh2->batch_head = NULL -> unlock(sh2) -> test_and_clear_bit(R5_Overlap, sh2->dev[i].flags) -> wake_up_bit(sh2->dev[i].flags) raid5_make_request() -> add_all_stripe_bios(sh2) -> lock(sh2) -> stripe_bio_overlaps(sh2) returns true batch_head is NULL, so new bio overlap exist bio on sh2 -> true -> set_bit(R5_Overlap, sh2->dev[i].flags) -> unlock(sh2) -> wait_on_bit(sh2->dev[i].flags) -> sh2->dev[i].flags = sh1->dev[i].flags & ~R5_Overlap No wait_up_bit(), CPU2 could be wait_on_bit() forever... Fix by : - Expand the protect zone. - Use batch_head's device flag's snaphot when no held head_sh->stripe_lock. - Move sh/head_sh->batch_head = NULL to the end of protected zone , and , any concurrent add_all_stripe_bios() grabs sh->stripe_lock now either: - see batch_head != null, and , is rejected by stripe_bio_overlaps() under the lock (no R5_Overlap wait ) , or , - sees batch_head == NULL, only after dev[i].flags has already been set and the prior R5_Overlap waiters worken. KCSAN report: ================================================ BUG: KCSAN: data-race in break_stripe_batch_list / raid5_make_request write (marked) to 0xffff8e89c8117548 of 8 bytes by task 4042 on cpu 0: raid5_make_request+0xea0/0x2930 md_handle_request+0x4a2/0xa40 md_submit_bio+0x109/0x1a0 __submit_bio+0x2ec/0x390 submit_bio_noacct_nocheck+0x457/0x710 submit_bio_noacct+0x2a7/0xc20 submit_bio+0x56/0x250 blkdev_direct_IO+0x54c/0xda0 blkdev_write_iter+0x38f/0x570 aio_write+0x22b/0x490 io_submit_one+0xa51/0xf70 __x64_sys_io_submit+0xf7/0x220 x64_sys_call+0x1907/0x1c60 do_syscall_64+0x130/0x570 entry_SYSCALL_64_after_hwframe+0x76/0x7e read to 0xffff8e89c8117548 of 8 bytes by task 4010 on cpu 5: break_stripe_batch_list+0x249/0x480 handle_stripe_clean_event+0x720/0x9b0 handle_stripe+0x32fb/0x4500 handle_active_stripes.isra.0+0x6e0/0xa50 raid5d+0x7e0/0xba0 md_thread+0x15a/0x2d0 kthread+0x1e3/0x220 ret_from_fork+0x37a/0x410 ret_from_fork_asm+0x1a/0x30 value changed: 0x0000000000000019 -> 0x0000000000000099 --> R5_Overlap | ||||
| CVE-2026-72422 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: fix use-after-free of conn->preauth_info in concurrent SMB2 NEGOTIATE conn->preauth_info is shared connection state (struct preauth_integrity_info, kmalloc-96) that is allocated and freed by the SMB2 NEGOTIATE handler and read by the response send path. smb2_handle_negotiate() allocates conn->preauth_info, and on a deassemble_neg_contexts() failure kfrees it and sets it to NULL. Both the allocation and the free/NULL happen under ksmbd_conn_lock(conn) (the connection srv_mutex), which is held across the whole handler body. The response send path smb3_preauth_hash_rsp(), called from the send: block of __handle_ksmbd_work(), reads conn->preauth_info and dereferences conn->preauth_info->Preauth_HashValue (via ksmbd_gen_preauth_integrity_hash()) without taking conn_lock. When a client drives two SMB2 NEGOTIATE requests on the same connection, one worker can free conn->preauth_info on the failing-negotiate path while a concurrent send-path worker is reading it, producing a slab use-after-free read (KASAN-confirmed). The send-path read tested conn->preauth_info for NULL but raced with the free that occurs between the NULL check and the dereference, so the NULL guard alone does not close the window. Serialize the NEGOTIATE-branch read in smb3_preauth_hash_rsp() under ksmbd_conn_lock(conn) and re-check conn->preauth_info inside the lock. Because the negotiate handler holds conn_lock across its kfree + NULL assignment, a reader that also takes conn_lock either runs fully before the allocation or fully after the NULL store, and can never observe the freed-but-not-yet-NULLed pointer. ksmbd_gen_preauth_integrity_hash() takes no locks itself (it only computes a SHA-512 over the buffer), so no lock-ordering inversion is introduced, and conn_lock is a sleepable mutex which is safe on this send path (it already performs network I/O). | ||||
| CVE-2026-72466 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: xprtrdma: Fix bcall rep leak and unbounded peek rpcrdma_is_bcall() decodes a reply's first words to decide whether the frame is a backchannel call. Two issues in that decode path let a short or malformed reply leak the receive buffer and drain the Receive queue. First, the speculative peek p = xdr_inline_decode(xdr, 0); /* five p++ reads follow */ asks xdr_inline_decode() for zero bytes, which returns xdr->p without consulting xdr->end. The five subsequent __be32 reads can then walk up to 20 bytes past the wire payload into stale regbuf contents and misclassify the reply as a backchannel call. Second, after the post-peek p = xdr_inline_decode(xdr, 3 * sizeof(*p)); if (unlikely(!p)) return true; the short-header arm returns true without calling rpcrdma_bc_receive_call(). The contract with the caller is that a true return transfers ownership of rep to the backchannel path: rpcrdma_reply_handler() if (rpcrdma_is_bcall(r_xprt, rep)) return; /* bare return, skips out_post */ ... out_post: rpcrdma_post_recvs(r_xprt, credits + ...); Because rpcrdma_bc_receive_call() never ran, no one took rep, but rpcrdma_reply_handler still bare-returns past rpcrdma_rep_put() and rpcrdma_post_recvs(). The rep, with its persistently DMA-mapped receive buffer, is orphaned on rb_all_reps and freed only at transport teardown. This completion reposts nothing, so its slot is reclaimed only when a later forward-channel reply reaches out_post and rpcrdma_post_recvs() allocates a fresh rep to backfill; absent that traffic the Receive queue drains and the peer's Sends draw RNR NAKs. Fix by consulting xdr->end after the zero-length peek so the five __be32 reads cannot run unless 20 bytes of wire payload remain. A byte-precise comparison against xdr->end is required because a non-4-aligned receive rounds the stream's word count up past the true payload. Also return false from the short-header arm so the reply falls through the normal out_norqst cleanup chain (rpcrdma_rep_put() plus rpcrdma_post_recvs()). | ||||
| CVE-2026-72470 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs/ntfs3: resize log->one_page_buf when adopting on-disk page size log_replay() allocates log->one_page_buf using the page size that was chosen from the host PAGE_SIZE: log->one_page_buf = kmalloc(log->page_size, GFP_NOFS); Later, when a restart area is found, the log page size recorded on disk is adopted: t32 = le32_to_cpu(log->rst_info.r_page->sys_page_size); if (log->page_size != t32) { log->l_size = log->orig_file_size; log->page_size = norm_file_page(t32, &log->l_size, t32 == DefaultLogPageSize); } If the on-disk page size is larger than the size used for the initial allocation, log->page_size grows but one_page_buf is left at its original, smaller size. A subsequent unaligned read_log_page() then reads log->page_size bytes into the undersized scratch buffer: page_buf = page_off ? log->one_page_buf : *buffer; err = ntfs_read_run_nb_ra(ni->mi.sbi, &ni->file.run, page_vbo, page_buf, log->page_size, NULL, &log->read_ahead); overflowing the allocation. This is reachable when mounting a dirty NTFS volume whose log was formatted with a page size larger than the buffer initially allocated on the mounting host (for example a 64K-log volume mounted on a host that allocated a 4K scratch buffer). Grow one_page_buf when the adopted on-disk page size exceeds the size used for the initial allocation. On krealloc() failure the original buffer is left intact and freed by the existing error path. | ||||
| CVE-2026-75050 | 1 Jetbrains | 1 Youtrack | 2026-08-17 | 7.1 High |
| In JetBrains YouTrack before 2026.1.13901, 2026.2.17950 doS attack was possible via crafted type parameters | ||||
| CVE-2026-75053 | 1 Jetbrains | 1 Intellij Idea | 2026-08-17 | 5.4 Medium |
| In JetBrains IntelliJ IDEA before 2026.2.1 sSRF was possible via the DevKit debug listener endpoint | ||||
| CVE-2026-75057 | 1 Jetbrains | 1 Intellij Idea | 2026-08-17 | 6.2 Medium |
| In JetBrains IntelliJ IDEA before 2026.1.5 git credentials were written in plaintext to the IDE log | ||||
| CVE-2026-63700 | 1 Dell | 1 Wyse Management Suite | 2026-08-17 | 7.8 High |
| Dell Wyse Management Suite (WMS), versions prior to 2605.0.2, contain an Incorrect Default Permission vulnerability. A low privileged attacker with local access could potentially exploit this vulnerability, leading to Privilege Escalation. | ||||
| CVE-2026-74238 | 2026-08-17 | 7.5 High | ||
| TIER IV Nebula through 1.2.0 contains an out-of-bounds read vulnerability in the Vlp32Decoder::unpack() function that allows unauthenticated remote attackers to cause the decoder to read past the end of a received UDP buffer into adjacent heap memory by sending a short UDP datagram. Attackers can send a malformed datagram to the Velodyne UDP sensor port, which lacks sender-address restrictions present in other drivers, causing fabricated points derived from heap memory contents to be silently published into downstream PointCloud2 messages consumed by Autoware nodes. | ||||
| CVE-2026-14525 | 4 Apple, Ibm, Linux and 1 more | 8 Macos, Aix, I and 5 more | 2026-08-17 | 9.4 Critical |
| IBM WebSphere Application Server - Liberty 17.0.0.3 through 26.0.0.8 IBM WebSphere Application Server Liberty is vulnerable to an authentication bypass when the rtcomm-1.0 or rtcommGateway-1.0 feature is enabled. | ||||
| CVE-2026-35554 | 1 Apache | 1 Kafka | 2026-08-17 | 8.7 High |
| A race condition in the Apache Kafka Java producer client’s buffer pool management can cause messages to be silently delivered to incorrect topics. When a produce batch expires due to delivery.timeout.ms while a network request containing that batch is still in flight, the batch’s ByteBuffer is prematurely deallocated and returned to the buffer pool. If a subsequent producer batch—potentially destined for a different topic—reuses this freed buffer before the original network request completes, the buffer contents may become corrupted. This can result in messages being delivered to unintended topics without any error being reported to the producer. Data Confidentiality: Messages intended for one topic may be delivered to a different topic, potentially exposing sensitive data to consumers who have access to the destination topic but not the intended source topic. Data Integrity: Consumers on the receiving topic may encounter unexpected or incompatible messages, leading to deserialization failures, processing errors, and corrupted downstream data. This issue affects Apache Kafka versions ≤ 3.9.1, ≤ 4.0.1, and ≤ 4.1.1. Kafka users are advised to upgrade to 3.9.2, 4.0.2, 4.1.2, 4.2.0, or later to address this vulnerability. | ||||
| CVE-2026-44416 | 1 Apache | 1 Ranger | 2026-08-17 | 9.8 Critical |
| Remote Code Execution via Arbitrary Class Instantiation in plugin-schema-registry component in Apache Ranger <= 2.8.0. Users are recommended to upgrade to version 2.9.0, which fixes this issue. | ||||
| CVE-2026-28529 | 1 Cryptodev-linux | 1 Cryptodev-linux | 2026-08-17 | 7.8 High |
| cryptodev-linux version 1.14 and prior contain a page reference handling flaw in the get_userbuf function of the /dev/crypto device driver that allows local users to trigger use-after-free conditions. Attackers with access to the /dev/crypto interface can repeatedly decrement reference counts of controlled pages to achieve local privilege escalation. | ||||
| CVE-2026-72374 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: afs: Fix callback service message parsers to pass through -EAGAIN The AFS filesystem client uses an rxrpc server to listen for callback notifications. Each callback call type handler has a delivery function that parses the incoming request stream, and this should return -EAGAIN the last packet hasn't yet been seen, but all currently queued received data is consumed. afs_extract_data() does this, but the -EAGAIN return is switched to 0 inadvertantly Fix callback service message parsers to pass through -EAGAIN | ||||
| CVE-2026-72380 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: xen/pvcalls: bound backend response req_id before indexing rsp[] pvcalls_front_event_handler() takes req_id directly from the backend-supplied ring response and uses it to index the fixed-size bedata->rsp[] array for a memcpy() and a store, with no range check. A malicious or buggy backend can set req_id past PVCALLS_NR_RSP_PER_RING and drive an out-of-bounds write past the bedata allocation. req_id was also declared int while the wire field rsp->req_id is u32, so a range check on the signed value alone is insufficient: a backend req_id of 0xffffffff becomes -1, passes a >= PVCALLS_NR_RSP_PER_RING test and indexes bedata->rsp[-1]. Declare req_id as u32 so a single bound covers both ends. A backend that sends an out-of-range req_id has violated the wire protocol, so rather than silently dropping the response, log once and stop trusting the backend: set bedata->disabled. The event handler then ignores further responses, and the request paths that wait for a response return -EIO instead of blocking forever. This mirrors the fatal-error handling xen-netback uses (xenvif_fatal_tx_err()). The pvcalls frontend currently trusts its backend, so this is not a classic-Xen security issue, but it matters for hardening PV frontends against malicious backends (confidential and disaggregated deployments). | ||||
| CVE-2026-72383 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: fix addr_wq_timer race in sctp_free_addr_wq() sctp_free_addr_wq() previously removed addr_wq_timer using timer_delete() while holding addr_wq_lock. However, timer_delete() does not guarantee that a currently running timer handler has completed. This allows a race with sctp_addr_wq_timeout_handler(), where the handler may still run after addr_waitq has been freed, acquire addr_wq_lock, and access freed memory, leading to a use-after-free. Fix this by calling timer_shutdown_sync() before taking addr_wq_lock. This guarantees that any in-flight timer handler has finished and prevents the timer from being re-armed during teardown, making subsequent cleanup safe. | ||||
| CVE-2026-72399 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net: enetc: check the number of BDs needed for xdp_frame The size of xdp_redirect_arr array is ENETC_MAX_SKB_FRAGS. However, the number of fragments contained in xdp_frame may be greater than or equal to ENETC_MAX_SKB_FRAGS, which will cause the access to xdp_redirect_arr to be out of bounds. | ||||
| CVE-2026-72404 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: fix UAF in cleanup_bearer() due to premature dst_cache_destroy() TIPC UDP media bearer teardown calls dst_cache_destroy() on its replicast caches before calling synchronize_net() to wait for concurrent RCU readers (transmitters) to finish: static void cleanup_bearer(struct work_struct *work) { ... list_for_each_entry_safe(rcast, tmp, &ub->rcast.list, list) { dst_cache_destroy(&rcast->dst_cache); list_del_rcu(&rcast->list); kfree_rcu(rcast, rcu); } ... dst_cache_destroy(&ub->rcast.dst_cache); udp_tunnel_sock_release(ub->sk); synchronize_net(); ... } This is highly buggy because dst_cache_destroy() immediately frees the per-CPU cache memory (free_percpu()) and releases the cached dst entries without any synchronization. If a concurrent transmitter (e.g., tipc_udp_xmit()) is running on another CPU under RCU protection, it can call dst_cache_get() concurrently, leading to: 1. Use-After-Free on the per-CPU cache pointer itself (crash). 2. "rcuref - imbalanced put()" warning if it attempts to release a dst that was concurrently released by dst_cache_destroy(). Furthermore, calling kfree(ub) immediately after synchronize_net() without closing the socket first (or waiting after closing it) leaves a window where a concurrent receiver (tipc_udp_recv()) could start after synchronize_net(), access ub, and suffer a UAF when kfree(ub) runs. To fix this, we must defer dst_cache_destroy() and kfree(ub) until after we have ensured that no more readers can see the bearer/socket and all existing readers have finished: 1. Defer rcast entry destruction (both dst_cache_destroy() and kfree()) to an RCU callback using call_rcu_hurry(). Using call_rcu_hurry() ensures the dst entries are released quickly. 2. Release the bearer socket using udp_tunnel_sock_release() (stops new receive readers). 3. Call synchronize_net() to wait for all outstanding RCU readers (both transmit and receive) to finish. 4. Now that it is safe, call dst_cache_destroy() on the main bearer cache, and free ub. Note: 3) and 4) can be changed later in net-next to also use call_rcu_hurry() and get rid of the synchronize_net() latency. | ||||
| CVE-2026-72406 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net: sungem: fix probe error cleanup gem_init_one() calls gem_remove_one() when register_netdev() fails. gem_remove_one() unregisters and frees resources owned by the net_device, including the DMA block, MMIO mapping, PCI regions, and the net_device itself. gem_init_one() then falls through to its own cleanup labels and frees the same resources again. Keep the register_netdev() error path in gem_init_one(): clear drvdata so PM/remove paths do not see a half-registered device, remove the NAPI instance added during probe, and let the existing cleanup labels release the resources once. The issue was found by a local static-analysis checker for probe error paths. The reported path was manually inspected before sending this fix. Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed because no sungem hardware is available. | ||||