| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath9k: fix OOB access from firmware tx status queue ID
ath_tx_edma_tasklet() accesses sc->tx.txq[ts.qid] where ts.qid is a
4-bit hardware field (0-15), but the txq array only has
ATH9K_NUM_TX_QUEUES (10) entries. A qid >= 10 causes an OOB array
access.
Add a bounds check on ts.qid before using it as an array index. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix OOB read from firmware RX descriptor exceeding DMA buffer
In rtw_pci_rx_napi(), new_len is computed as the sum of pkt_len (14-bit
descriptor field, max 16383) and pkt_offset (drv_info_sz + shift, both
firmware-controlled). The result can exceed RTK_PCI_RX_BUF_SIZE (11478),
causing an out-of-bounds read from the pre-allocated DMA buffer when
skb_put_data copies new_len bytes. The USB transport already validates
this (rtw_usb_rx_data_put checks against RTW_USB_MAX_RECVBUF_SZ); the
PCIe path does not.
Add a check that new_len does not exceed the DMA buffer size. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers
rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: handle CB.InitCallBackState3 requests without a server record
The cache manager callback path now attaches the server record to an
incoming call through the rxrpc peer's app data. That association is
not guaranteed to exist for every callback request, and most callback
handlers already tolerate that case.
Make CB.InitCallBackState3 follow the same pattern by checking whether a
server record was attached before using it. If the peer is not mapped
to a server record, trace the request and ignore it, matching the
existing behaviour for other unmatched callback requests.
This keeps the callback handler consistent with the rest of the cache
manager service and avoids depending on peer state that may not be
available for a given request. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix netns teardown to cancel the preallocation charger
Fix the teardown of an afs network namespace to make sure it cancels the
work item that keeps the preallocated rxrpc call/conn/peer queue charged
before incoming calls are disabled (i.e. listen 0).
Also, if net->live is false because the afs netns is being deleted, make
afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid
requeuing the charger.
(This was found by AI review). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
Fix the wait in rxrpc_recvmsg() also take check the oob queue. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: serialize kernel accept preallocation with socket teardown
rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.
Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or discarded the service backlog. |
| NVIDIA Triton Inference Server for Linux contains a vulnerability where a user could cause files outside the model repository to be read, written to, or modified by providing a path in the model name to the Triton MLflow plugin. A successful exploit of this vulnerability might lead to denial of service and information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
gpib: fix double decrement of descriptor_busy in command_ioctl()
commit d1857f8296dc ("gpib: fix use-after-free in IO ioctl handlers")
introduced a descriptor_busy reference counter to pin struct
gpib_descriptor across IO ioctl operations. In command_ioctl(), the
error path inside the loop decrements descriptor_busy and breaks, but
execution then falls through to the unconditional decrement after the
loop, underflowing the counter to -1.
This re-enables the use-after-free that the original fix was meant to
prevent: a concurrent close_dev_ioctl() sees descriptor_busy == 0 on
an actively-used descriptor and frees it.
Remove the early decrement from the error path. The post-loop
decrement already handles all exit paths, matching the correct pattern
used in read_ioctl() and write_ioctl(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Replace waitqueue and flag with completion
The driver previously used a waitqueue along with an explicit
request_done flag, but without proper barriers around request_done.
An earlier patch by Gui-Dong Han <hanguidong02@gmail.com> attempted
to fix this by adding the missing memory barriers. Rather than
adding the barriers, this patch replaces the waitqueue+flag with
a completion, which is designed for this exact purpose. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix KASAN slab-out-of-bounds in amdgpu_coredump ring dump
The ring content dump in amdgpu_coredump() uses two separate loops over
adev->rings[]: the first counts rings with unsignalled fences to size
the allocation, and the second copies ring data into the allocated
buffers.
Both loops use the same condition to skip rings:
atomic_read(&ring->fence_drv.last_seq) == ring->fence_drv.sync_seq
Because last_seq is an atomic that is updated concurrently by the fence
signalling path, additional rings may appear unsignalled in the second
loop that were signalled during the first. When this happens, idx
exceeds the allocated ring_count and the store to coredump->rings[idx]
writes past the end of the kcalloc-ed buffer.
This was found during IGT stressful test amd_queue_reset which
triggers random GPU resets. The OVERSIZE subtest
(CMD_STREAM_EXEC_INVALID_PACKET_LENGTH_OVERSIZE on GFX ring) provokes
a ring timeout and subsequent coredump, which hits the race between
the counting and copying loops. The failure is non-deterministic and
depends on fence signalling timing during the reset.
KASAN log:
BUG: KASAN: slab-out-of-bounds in amdgpu_coredump+0x1274/0x12f0 [amdgpu]
Write of size 4 at addr ffff888106154258 by task kworker/u128:5/23625
CPU: 16 UID: 0 PID: 23625 Comm: kworker/u128:5 Not tainted 6.19.0+ #35
Workqueue: amdgpu-reset-dev drm_sched_job_timedout [gpu_sched]
Call Trace:
<TASK>
dump_stack_lvl+0xa5/0x110
print_report+0xd1/0x660
kasan_report+0xf3/0x130
__asan_report_store4_noabort+0x17/0x30
amdgpu_coredump+0x1274/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
drm_sched_job_timedout+0x194/0x5c0 [gpu_sched]
process_one_work+0x84b/0x1990
worker_thread+0x6b8/0x11b0
</TASK>
Allocated by task 23625:
kasan_save_stack+0x39/0x70
__kasan_kmalloc+0xc3/0xd0
__kmalloc_noprof+0x2ec/0x910
amdgpu_coredump+0x5c5/0x12f0 [amdgpu]
amdgpu_job_timedout+0xef0/0x16c0 [amdgpu]
The buggy address belongs to the object at ffff888106154200
which belongs to the cache kmalloc-rnd-09-96 of size 96
The buggy address is located 16 bytes to the right of
allocated 72-byte region [ffff888106154200, ffff888106154248)
72 bytes = 3 * sizeof(struct amdgpu_coredump_ring), so ring_count was 3
but idx reached 3+, writing ring_index (at struct offset 16) 16 bytes
past the allocation.
Fix by adding an idx < ring_count guard to the copy loop so it cannot
exceed the allocated count even when the fence state changes between
the two passes. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1,raid10: fix error-path detection with md_cloned_bio()
Detect the error path using md_cloned_bio() instead of relying
on r1_bio in raid1 or r10_bio->read_slot in raid10, which may be
NULL or -1 after splitting and resubmitting a failed bio.
As a result, the error path may not be recognized and memory
allocations can incorrectly use GFP_NOIO instead of
(GFP_NOIO | __GFP_HIGH), which can lead to a deadlock under
memory pressure. |
| In the Linux kernel, the following vulnerability has been resolved:
vdpa/octeon_ep: fix IRQ-to-ring mapping in interrupt handler
Look up the IRQ index in oct_hw->irqs instead of assuming
irq - irqs[0]. This supports non-contiguous IRQ numbers and
avoids incorrect ring indexing when irqs[0] is not the base. |
| In the Linux kernel, the following vulnerability has been resolved:
lockd: Avoid hashing uninitialized bytes in nlm4svc_lookup_file()
file_hash() digests the first LOCKD_FH_HASH_SIZE bytes of
nfs_fh.data when bucketing nlm_files[], independent of fh.size.
Commit 3de744ee4e45 ("lockd: Use xdrgen XDR functions for the
NLMv4 TEST procedure") set .pc_argzero to zero for the converted
procedures and moved file-handle population into
nlm4svc_lookup_file(), which copies only xdr_lock->fh.len bytes
into lock->fh.data.
When an NLMv4 client presents a file handle shorter than
LOCKD_FH_HASH_SIZE, bytes fh.len..31 retain whatever the argument
buffer held from an earlier request. The same wire handle then
hashes to different buckets across calls; nlm_lookup_file() misses
the existing nlm_file entry, and lock-state lookups fail.
Zero only the tail bytes that file_hash() would otherwise consume.
Handles of LOCKD_FH_HASH_SIZE or larger already populate every byte
that file_hash() reads. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp-sdw-legacy: Bound DAI link iteration
create_sdw_dailinks() walks soc_dais until it finds an entry with
initialised cleared, but soc_dais is allocated with exactly num_ends
entries. If all entries are initialised, the loop reads past the end of
the array.
This was reported by KASAN:
BUG: KASAN: slab-out-of-bounds in mc_probe+0x26b3/0x2774 [snd_acp_sdw_legacy_mach]
Read of size 1
Pass the allocated entry count to create_sdw_dailinks() and stop before
reading past the array. |
| In the Linux kernel, the following vulnerability has been resolved:
thunderbolt: Prevent XDomain delayed work use-after-free on disconnect
tb_xdp_handle_request() runs on system_wq and queues
xd->state_work via queue_delayed_work() in three request handlers:
PROPERTIES_CHANGED_REQUEST, UUID_REQUEST (via start_handshake),
and LINK_STATE_CHANGE_REQUEST. Similarly, update_xdomain() queues
xd->properties_changed_work when local properties change.
Concurrently, tb_xdomain_remove() calls stop_handshake() which does
cancel_delayed_work_sync() on both delayed works. Later,
tb_xdomain_unregister() calls device_unregister() which eventually
frees the xdomain. Since commit 559c1e1e0134 ("thunderbolt: Run
tb_xdp_handle_request() in system workqueue") moved the request
handler off tb->wq, the handler and the remove path are no longer
serialized. If queue_delayed_work() executes after
cancel_delayed_work_sync() but before the xdomain is freed, the
delayed work fires on a freed object.
Add xd->removing that tb_xdomain_remove() sets under xd->lock
before calling stop_handshake(). Each external queue site holds
the same lock and checks removing before calling
queue_delayed_work(). This provides the mutual exclusion needed:
either the queue site acquires the lock first and queues work that
the subsequent cancel will see, or the remove path acquires the
lock first and the queue site observes removing == true and skips
the queue. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Wait on external BO kernel fences in exec IOCTL
Before arming a user job, xe_exec_ioctl() only added the VM's
dma-resv KERNEL slot as a dependency. That slot covers rebinds and
the kernel operations of the VM's private BOs, but not external BOs
(bo->vm == NULL), which carry their kernel operations (evictions,
moves, ...) in their own dma-resv KERNEL slot.
The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for
memory management operations that must complete before the BO or its
backing store may be used: any accessor is required to wait on the
KERNEL fences before touching the resv. By skipping the external BOs'
KERNEL slots, the exec path violated that contract and could schedule
a user job while a kernel operation on an external BO mapped by the VM
was still in flight, racing against it and potentially reading or
writing memory that was being moved.
Replace the VM-only dependency with an iteration over every object
locked by the exec, adding each object's KERNEL slot as a job
dependency. This covers the VM resv (rebinds and private BOs) as well
as every external BO, mirroring the drm_gpuvm_resv_add_fence() call
that later publishes the job fence to the same set of objects.
Long-running mode continues to skip this, as before.
(cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix divide-by-zero in calculate_mcache_setting on zero viewport
If a plane reaches calculate_mcache_setting with a zero-area viewport,
calculate_mcache_setting exits early with num_mcaches == 0 and
mvmpg_width/height == 0. This will cause a divide-by-zero panic and can
also cause an underflow on num_mcaches.
Fix this by changing calculate_mcache_setting to bool and adding guards
after each calculate_mcache_row_bytes call. If num_mcaches or
mvmpg_width/height is zero, return a false. Callers will propagate the
failure as a rejected mode, which prevents the panic.
(cherry picked from commit 29c0f7c655f47bcbd575ff75e58480df6ec3c9da) |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: harden runlist realloc size calculations
Add a shared helper to safely convert runlist element counts to byte sizes
using overflow checks, and use it in both ntfs_rl_realloc() and
ntfs_rl_realloc_nofail(). |
