| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Neutralization of Input During Web Page Generation in Forcepoint Web Security (On-Prem) on Windows allows Stored XSS.This issue affects Web Security through 8.5.6. |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| An issue was discovered in Mbed TLS before 2.28.2 and 3.x before 3.3.0. There is a potential heap-based buffer overflow and heap-based buffer over-read in DTLS if MBEDTLS_SSL_DTLS_CONNECTION_ID is enabled and MBEDTLS_SSL_CID_IN_LEN_MAX > 2 * MBEDTLS_SSL_CID_OUT_LEN_MAX. |
| Mbed TLS 3.5.x through 3.6.x before 3.6.2 has a buffer underrun in pkwrite when writing an opaque key pair |
| Inappropriate implementation in GPU in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Critical) |
| A flaw has been found in D-Link DWR-M920 up to 1.1.50. The impacted element is the function sub_412DA0 of the file /boafrm/formIMEISetup. This manipulation of the argument IMEI_value causes os command injection. The attack can be initiated remotely. The exploit has been published and may be used. |
| A vulnerability was detected in tittuvarghese CollegeManagementSystem 3e476335cfbfb9a049e09f474c7ec885f69a9df3/a38852979f7e27ae67b610dce5979500ef8ebe01. This affects an unknown function of the file dashboard_page/forms/fetch.php. Performing a manipulation of the argument department_code results in sql injection. The attack can be initiated remotely. The exploit is now public and may be used. Continious delivery with rolling releases is used by this product. Therefore, no version details of affected nor updated releases are available. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in Shibby Tomato 1.28.0000. This issue affects the function start_vpnserver of the file /sbin/rc of the component Web UI. Performing a manipulation results in os command injection. The attack can be initiated remotely. The exploit has been made public and could be used. This project is superseded by FreshTomato. |
| A vulnerability was detected in D-Link DWR-M920 1.1.50/1.1.70. Affected is the function sub_41C8E8 of the file /boafrm/formSmsManage. Performing a manipulation of the argument action_value results in command injection. The attack is possible to be carried out remotely. The exploit is now public and may be used. |
| An integer underflow in bt_mesh_sol_recv() in the Bluetooth Mesh solicitation handling (subsys/bluetooth/mesh/solicitation.c) leads to an out-of-bounds write. When CONFIG_BT_MESH_OD_PRIV_PROXY_SRV is enabled, the function parses solicitation PDUs from raw BLE advertising payloads. The AD parsing loop reads an attacker-controlled length byte (reported_len) and computes reported_len - 3 without checking that reported_len >= 3. When reported_len is less than 3, the subtraction is performed in signed int arithmetic and yields a negative value that bypasses the length guard and is then implicitly converted to a very large size_t when passed to net_buf_simple_pull_mem(). In builds without assertions, this wraps the buffer length and advances the data pointer far out of bounds, so subsequent reads dereference invalid memory. A nearby BLE device can trigger this with a non-connectable advertisement carrying a UUID16 AD structure and a crafted length byte, with no pairing or prior association required, potentially leading to denial of service or arbitrary code execution. |
| A potential out-of-bounds write/read exists in the TLS socket connect path of the network sockets subsystem (subsys/net/lib/sockets/sockets_tls.c). When the TLS session cache is enabled, tls_session_store() and tls_session_restore() memcpy the caller-supplied address into a fixed-size buffer using the caller-controlled addrlen value without validating it against the destination size. struct net_sockaddr is an opaque type, so an application can pass an addrlen larger than sizeof(struct net_sockaddr) (for example 128 bytes into a 24-byte stack buffer), causing the memcpy to read and write past the end of the address memory used by the TLS session cache. This out-of-bounds write can lead to a crash and denial of service, and potentially to arbitrary code execution. |
| A vulnerability has been found in code-projects Hotel and Tourism Reservation System 1.0. This affects an unknown function of the file /details.php. Such manipulation of the argument room leads to sql injection. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. |
| An improper access control vulnerability in the canonical-livepatch snap client prior to version 10.15.0 allows a local unprivileged user to obtain a sensitive, root-level authentication token by sending an unauthenticated request to the livepatchd.sock Unix domain socket. This vulnerability is exploitable on systems where an administrator has already enabled the Livepatch client with a valid Ubuntu Pro subscription. This token allows an attacker to access Livepatch services using the victim's credentials, as well as potentially cause issues to the Livepatch server. |
| NAVTOR NavBox through version 4.16.1.20 contains hard-coded credentials within its Windows Communication Foundation (SOAP) implementation. If the SOAP functionality is enabled, a local attacker can extract credentials to bypass the intended transfer workflow. Successful authentication against the SOAP interface grants access to privileged WCF methods, enabling an attacker to write or overwrite files within application-defined paths. |
| In Mimecast Incydr before 2.6.0, arbitrary file access can occur. |
| In Znuny LTS before 6.5.21 and Znuny before 7.3.3, XSS can occur via stored user preferences. |
| In Znuny LTS before 6.5.21 and Znuny before 7.3.3, there is reflected XSS in
AdminCommunicationLog (aka the communication log administration view). |
| radare2 prior to commit bc5a890 contains a command injection vulnerability in the afsv/afsvj command path where crafted ELF binaries can embed malicious r2 command sequences as DWARF DW_TAG_formal_parameter names. Attackers can craft a binary with shell commands in DWARF parameter names that execute when radare2 analyzes the binary with aaa and subsequently runs afsvj, allowing arbitrary shell command execution through the unsanitized parameter interpolation in the pfq command string. |
| Insufficient access control restrictions in the file write tool in Amazon Kiro IDE before version 0.11 might allow remote unauthenticated actors to execute arbitrary commands via crafted instructions that cause writes to execution-sensitive paths (such as .vscode/tasks.json), enabling auto-execution on folder open.
To remediate this issue, users should upgrade to Kiro IDE version 0.11 or later. |
| Mattermost Desktop App versions <=6.1 6.0.1 5.4.13.0 fail to prevent server-rendered content from closing an underlying application view in the Mattermost Desktop App which allows a malicious server or plugin to crash the desktop client via invoking {{window.close()}} in the renderer context, leading to a denial of service condition at the client level. Mattermost Advisory ID: MMSA-2026-00633 |
