| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory_hotplug: fix incorrect altmap passing in error path
In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds
with memmap_on_memory enabled, the vmemmap pages are allocated from
params.altmap. If create_memory_block_devices() subsequently fails, the
error path calls arch_remove_memory() with a NULL altmap instead of
params.altmap.
This is a bug that could lead to memory corruption. Since altmap is NULL,
vmemmap_free() falls back to freeing the vmemmap pages into the system
buddy allocator via free_pages() instead of the altmap.
arch_remove_memory() then immediately destroys the physical linear mapping
for this memory. This injects unowned pages into the buddy allocator,
causing machine checks or memory corruption if the system later attempts
to allocate and use those freed pages.
Fix this by passing params.altmap to arch_remove_memory() in the error
path. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: cap RESTART_TABLE free-chain walker at rt->used
A crafted NTFS3 disk image triggers an in-kernel infinite loop at
mount time, hanging the mounting thread and firing the soft-lockup
watchdog within ~22s on multi-CPU hosts (panic with
kernel.softlockup_panic=1). The bug is reachable from desktop USB
auto-mount on distributions where udisks2 routes the NTFS signature
to the in-tree ntfs3 driver (Arch family and an increasing fraction
of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual
mount elsewhere.
check_rstbl()'s second walker iterates the free-entry singly-linked
list headed by rt->first_free with no upper bound on iteration count:
for (off = ff; off;) {
if (off == RESTART_ENTRY_ALLOCATED)
return false;
off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off));
if (off > ts - sizeof(__le32))
return false;
}
The existing guards cover three exits: end-of-list (off == 0), the
in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds
(off > ts - sizeof(__le32)). None of the three prevents an
in-bounds cycle.
A crafted on-disk RESTART_TABLE whose free chain contains a
self-loop or A->B->A cycle whose offsets satisfy:
- in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)]
- (off - sizeof(struct RESTART_TABLE)) % rsize == 0
passes all existing guards and spins the mount-time thread forever.
Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal
RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18
stores 0x18 as its next pointer; mount of the forged image with
the in-tree ntfs3 driver never returns.
Bound the walker by rt->used. Each entry on a legitimate free
chain is unique, and the total slot count is ne = le16_to_cpu
(rt->used). A traversal that visits more than ne slots is by
construction malformed; reject it as a corrupt RESTART_TABLE.
After this patch, mount of the forged image returns with -EINVAL
and a log_replay failure message, and mkntfs-produced legitimate
images mount cleanly (verified in the same UML harness). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid self-deadlock during inode eviction
An attribute-list update performed while allocating clusters can drop the
last reference to the temporary attribute inode. Evicting that inode
drops its reference to the base inode and can invoke ntfs_drop_big_inode()
for the base inode from within the base inode's own writeback path.
If the base inode is unlinked, ntfs_drop_big_inode() calls
truncate_setsize(), which waits for the inode's folio writeback to
complete. The same writeback worker is responsible for completing that
writeback, so it waits for itself indefinitely.
Prevent this self-deadlock by grabbing a reference to the base inode at the
beginning of ntfs_writepages() and releasing it at the end of the function.
This defers eviction until all bios have been submitted, allowing the wait
for folio writeback to complete safely. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: fix dir put orders in access_pattern_add_dirs()
Patch series "mm/damon/sysfs-schemes: fix wrong directories put orders in
error paths".
Error paths of damon_sysfs_access_pattern_add_dirs() and
damon_sysfs_scheme_add_dirs() functions put references to directories in
wrong orders. As a result, uninitialized memory dereference and/or
memory leak can happen. Fix those.
This patch (of 2):
In access_pattern_add_dirs(), error handling path puts references starting
from setup failed directories. If the failure happpened from the initial
allication in the setup functions, uninitialized memory dereference
happen. The allocation failures will not commonly happen, but the
consequence is quite bad. Fix the wrong reference put orders.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error
damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the
stats directory setup is completed. When the tried_regions directory
setup is failed, the setup function ensures the reference for the tried
regions directory is released. Hence the error path should put references
on setup succeeded directory objects, starting from the stats directory.
However, the error path is putting the tried_regions directory instead of
the stats directory.
As a direct result, the stats directory object is leaked. Worse yet, if
the tried_regions directory setup failed from the initial allocation, the
scheme->tried_regions field remains uninitialized. The following
kobject_put(&scheme->tried_regions->kobj) call in the error path will
dereference the uninitialized memory. The setup failures should not be
common. But once it happens, the consequence is quite bad.
Fix this issue by correctly putting the stats directory instead of the
tried_regions directory.
The issue was discovered [1] by Sashiko. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/proc/task_mmu: fix hugetlb self-deadlock in pagemap_scan_pte_hole()
A PAGEMAP_SCAN ioctl requesting PM_SCAN_WP_MATCHING on a hugetlb VMA hangs
the calling thread, unkillably, as soon as the scan reaches an unpopulated
part of the range:
do_pagemap_scan()
walk_page_range()
walk_hugetlb_range()
hugetlb_vma_lock_read() # take the vma lock for read ...
pagemap_scan_pte_hole() # ... ->pte_hole() for a hole
uffd_wp_range()
change_protection()
hugetlb_change_protection()
hugetlb_vma_lock_write() # ... and block taking it for write
walk_hugetlb_range() holds the hugetlb vma lock for read across the whole
walk. A present entry goes to ->hugetlb_entry(); an unpopulated one goes
to ->pte_hole(), i.e. pagemap_scan_pte_hole(). To write-protect the hole
that handler calls uffd_wp_range(), which on a hugetlb VMA reaches
hugetlb_change_protection() and takes the same vma lock for write. The
thread then blocks in down_write() waiting for the read lock it is itself
holding.
The populated path avoids this: pagemap_scan_hugetlb_entry()
write-protects the entry inline under the page-table lock and never enters
hugetlb_change_protection().
Do the same for holes. Fault in the page table and install the uffd-wp
marker directly with make_uffd_wp_huge_pte() under the page-table lock,
rather than routing through uffd_wp_range(). That is the same sequence
hugetlb_change_protection() runs for an unpopulated entry, minus the vma
write lock -- which is safe to skip because PMD sharing is disabled on
uffd-wp VMAs (hugetlb_unshare_all_pmds() runs at registration), leaving
nothing for that lock to serialise against. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix fault in unaligned fixup
Use kzalloc_obj() / kzalloc_objs() to allocate the memcard structs,
instead of kmalloc_obj() / kmalloc_objs() to prevent access to
uninitialized data.
Fixes runtime error: Fault in unaligned fixup: 0000 [#1] at
mtd_get_fact_prot_info. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: fix infinite loop in p9_client_rpc on fatal signal
When p9_client_rpc() is called with type P9_TFLUSH and the transport
has no peer (e.g. fd transport backed by pipes with no 9p server),
a fatal signal causes an infinite loop:
again:
err = io_wait_event_killable(req->wq, ...)
/* SIGKILL wakes the task, returns -ERESTARTSYS */
if (err == -ERESTARTSYS && c->status == Connected &&
type == P9_TFLUSH) {
sigpending = 1;
clear_thread_flag(TIF_SIGPENDING);
goto again;
}
clear_thread_flag() clears TIF_SIGPENDING before jumping back to
io_wait_event_killable(). signal_pending_state() checks TIF_SIGPENDING,
finds it zero, and the task goes to sleep again. The task can only wake
on the next signal delivery that calls signal_wake_up() and sets
TIF_SIGPENDING again. When that happens the loop repeats, clears
TIF_SIGPENDING, and sleeps again indefinitely.
This is triggered in practice by coredump_wait(): when a thread in a
multi-threaded process causes a coredump (e.g. via SIGSYS from Syscall
User Dispatch), coredump_wait() sends SIGKILL to all other threads and
waits for them to call mm_release(). If one of those threads is blocked
in p9_client_rpc() over an fd transport with no peer, it enters the
P9_TFLUSH loop and never calls mm_release(), so coredump_wait() stalls
forever:
INFO: task syz.0.18:676 blocked for more than 143 seconds.
Not tainted 6.12.77+ #1
task:syz.0.18 state:D stack:27600 pid:676 tgid:673 ppid:630 flags:0x00000004
Call Trace:
<TASK>
context_switch kernel/sched/core.c:5344 [inline]
__schedule+0xcb4/0x5d50 kernel/sched/core.c:6724
__schedule_loop kernel/sched/core.c:6801 [inline]
schedule+0xe5/0x350 kernel/sched/core.c:6816
schedule_timeout+0x253/0x290 kernel/time/timer.c:2593
do_wait_for_common kernel/sched/completion.c:95 [inline]
__wait_for_common+0x409/0x600 kernel/sched/completion.c:116
wait_for_common kernel/sched/completion.c:127 [inline]
wait_for_completion_state+0x1d/0x40 kernel/sched/completion.c:264
coredump_wait fs/coredump.c:448 [inline]
do_coredump+0x854/0x4350 fs/coredump.c:629
get_signal+0x1425/0x2730 kernel/signal.c:2903
arch_do_signal_or_restart+0x81/0x880 arch/x86/kernel/signal.c:337
exit_to_user_mode_loop kernel/entry/common.c:111 [inline]
exit_to_user_mode_prepare include/linux/entry-common.h:328 [inline]
__syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline]
syscall_exit_to_user_mode+0xf9/0x160 kernel/entry/common.c:218
do_syscall_64+0x102/0x220 arch/x86/entry/common.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
</TASK>
Fix: check fatal_signal_pending() before clearing TIF_SIGPENDING in the
P9_TFLUSH retry loop. At that point TIF_SIGPENDING is still set, so
fatal_signal_pending() works correctly. If a fatal signal is pending,
jump to recalc_sigpending to restore TIF_SIGPENDING and return
-ERESTARTSYS to the caller.
The same defect is present in stable kernels back to 5.4. On those
kernels the infinite loop is broken earlier by a second SIGKILL from
the parent process (e.g. kill_and_wait() retrying after a timeout),
resulting in a zombie process and a shutdown delay rather than a
permanent D-state hang, but the underlying flaw is the same.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl: add bounds check in dfh_get_param_size()
dfh_get_param_size() can return a parameter size larger than the feature
region because the loop bounds check is evaluated before incrementing
size. If the EOP (End of Parameters) bit is set in the same iteration,
the inflated size is returned without re-validation against max.
This can cause create_feature_instance() to call memcpy_fromio() with a
size exceeding the ioremap'd region when a malicious FPGA device provides
crafted DFHv1 parameter headers.
Add a bounds check after the size increment to ensure the accumulated
size never exceeds the feature boundary. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm_tis_spi: Use wait_woken() in wait_for_tmp_stat()
wait_event_interruptible_timeout() evaluates its condition after setting
the current task state to TASK_INTERRUPTIBLE.
With CONFIG_DEBUG_ATOMIC_SLEEP this triggers a warning when the IRQ wait
path is used:
tpm_tis_status()
tpm_tis_spi_read_bytes()
tpm_tis_spi_transfer_full()
spi_bus_lock()
mutex_lock()
Address this with the following measures:
1. Call wait_tpm_stat_cond() only while tasking is running.
2. Use wait_woken() to wait for changes. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix use-after-free and double-free in disconnect
ims_pcu_disconnect() only intended to perform cleanup when the primary
(control) interface is unbound. However, it currently relies on the
interface class to distinguish between control and data interfaces.
A malicious device could present a data interface with the same class
as the control interface, leading to premature cleanup and potential
use-after-free or double-free.
Switch to verifying that the interface being disconnected is indeed
the control interface. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - fix type confusion in CDC union descriptor parsing
The driver currently trusts the bMasterInterface0 from the CDC union
descriptor without verifying that it matches the interface being
probed. This could lead to the driver overwriting the private data of
another interface.
Validate that the control interface found in the descriptor is indeed
the one we are probing. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: libertas_tf: fix use-after-free in lbtf_free_adapter()
lbtf_free_adapter() calls timer_delete(&priv->command_timer), which does
not wait for a running command_timer_fn() callback. lbtf_free_adapter()
runs on the teardown path right before ieee80211_free_hw() frees priv,
both in lbtf_remove_card() and in the probe error path. command_timer is
armed by mod_timer() in lbtf_cmd() whenever a firmware command is sent.
command_timer_fn() dereferences priv. If a command times out as the
device is removed, command_timer_fn() runs concurrently with teardown and
dereferences priv after it has been freed.
This is the same use-after-free that commit 03cc8f90d053 ("wifi: libertas:
fix use-after-free in lbs_free_adapter()") fixed in the sibling libertas
driver. The libertas_tf variant has the identical pattern and was left
unchanged. Use timer_delete_sync() so any in-flight callback completes
before priv is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: ca8210: fix pointer truncation in kfifo on 64-bit
ca8210_test_int_driver_write() and ca8210_test_int_user_read() exchange
a kmalloc'd buffer pointer through a struct kfifo, but pass a literal
'4' as the byte count to kfifo_in()/kfifo_out().
This is correct on 32-bit (pointer = 4 bytes), but on 64-bit only the
low 4 bytes of the 8-byte pointer are written into the FIFO. The reader
then reads back 4 bytes into an 8-byte local pointer variable, leaving
the upper 4 bytes uninitialized stack data. The first dereference of
the reconstructed pointer (fifo_buffer[1]) accesses an arbitrary kernel
address and generally results in an oops.
Use sizeof(fifo_buffer) so the byte count matches pointer width on every
architecture.
The driver has no architecture restriction in Kconfig, so any 64-bit
build with CONFIG_IEEE802154_CA8210_DEBUGFS=y is exposed. Issue has
been latent since the driver was added in 2017 because it is most
commonly deployed on 32-bit MCUs.
Found via a custom Coccinelle semantic patch hunting for short-byte
kfifo I/O on byte-mode kfifos used to shuttle pointers. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: probes: save original sp in rethook trampoline
Reading a word from the stack in a kretprobe crashes a risc-v kernel.
$ cd /sys/kernel/tracing/
$ echo 'r n_tty_write $stack0' > dynamic_events
$ echo 1 > events/kprobes/enable
Unable to handle kernel paging request at virtual address 0000000200000128
...
[<ffffffff80016d16>] regs_get_kernel_stack_nth+0x26/0x38
[<ffffffff80177196>] process_fetch_insn+0x3ee/0x760
[<ffffffff80177836>] kretprobe_trace_func+0x116/0x1f0
[<ffffffff8017795a>] kretprobe_dispatcher+0x4a/0x58
[<ffffffff8013572e>] kretprobe_rethook_handler+0x5e/0x90
[<ffffffff80180838>] rethook_trampoline_handler+0x70/0x108
[<ffffffff8001ba32>] arch_rethook_trampoline_callback+0x12/0x1c
[<ffffffff8001ba84>] arch_rethook_trampoline+0x48/0x94
[<ffffffff8067872a>] tty_write+0x1a/0x30
In regs_get_kernel_stack_nth, regs->sp contains an arbitrary value.
arch_rethook_trampoline saves the registers from the probed function in a
struct pt_regs. sp is not saved. Instead, sp is decremented for
arch_rethook_trampoline's local stack.
Fix this crash and save the original sp along with the other registers.
Use a0 as a temporary register, it is overwritten anyway.
[pjw@kernel.org: added Fixes tag; cc'ed stable] |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadlock in f2fs_balance_fs()
When the f2fs filesystem space is nearly exhausted, we encounter deadlock
issues as below:
INFO: task A:1890 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:A state:D stack:0 pid:1890 tgid:1626 ppid:1153 flags:0x00000204
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
folio_wait_bit+0x20/0x38
folio_wait_writeback+0x54/0xc8
truncate_inode_partial_folio+0x70/0x1e0
truncate_inode_pages_range+0x1b0/0x450
truncate_pagecache+0x54/0x88
f2fs_file_write_iter+0x3e8/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
INFO: task kworker/u8:11:2680853 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:11 state:D stack:0 pid:2680853 tgid:2680853 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
schedule+0x3c/0x118
io_schedule+0x44/0x68
folio_wait_bit_common+0x174/0x370
__filemap_get_folio+0x214/0x348
pagecache_get_page+0x20/0x70
f2fs_get_read_data_page+0x150/0x3e8
f2fs_get_lock_data_page+0x2c/0x160
move_data_page+0x50/0x478
do_garbage_collect+0xd38/0x1528
f2fs_gc+0x240/0x7e0
f2fs_balance_fs+0x1a0/0x208
f2fs_write_single_data_page+0x6e4/0x730
f2fs_write_cache_pages+0x378/0x9b0
f2fs_write_data_pages+0x2e4/0x388
do_writepages+0x8c/0x2c8
__writeback_single_inode+0x4c/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x200
INFO: task kworker/u8:8:2641297 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/u8:8 state:D stack:0 pid:2641297 tgid:2641297 ppid:2 flags:0x00000208
Workqueue: writeback wb_workfn (flush-254:0)
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_write_inode+0xf4/0x328
__writeback_single_inode+0x370/0x498
writeback_sb_inodes+0x234/0x4a8
__writeback_inodes_wb+0x58/0x118
wb_writeback+0x2f8/0x3c0
wb_workfn+0x2c4/0x508
process_one_work+0x180/0x408
worker_thread+0x258/0x368
kthread+0x118/0x128
ret_from_fork+0x10/0x20
INFO: task B:1902 blocked for more than 120 seconds.
Tainted: G O 6.12.41-g3fe07ddf05ab #1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:B state:D stack:0 pid:1902 tgid:1626 ppid:1153 flags:0x0000020c
Call trace:
__switch_to+0xf4/0x158
__schedule+0x27c/0x908
rt_mutex_schedule+0x30/0x60
__rt_mutex_slowlock_locked.constprop.0+0x460/0x8a8
rwbase_write_lock+0x24c/0x378
down_write+0x1c/0x30
f2fs_balance_fs+0x184/0x208
f2fs_map_blocks+0x94c/0x1110
f2fs_file_write_iter+0x228/0xb80
do_iter_readv_writev+0xf0/0x1e0
vfs_writev+0x138/0x2c8
do_writev+0x88/0x130
__arm64_sys_writev+0x28/0x40
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0xc8/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x30/0xf8
el0t_64_sync_handler+0x120/0x130
el0t_64_sync+0x190/0x198
INFO: task sync:2769849 blocked for more than 120 seconds.
Tainted: G
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix potential deadlock in gc_merge path of f2fs_balance_fs()
When we mount device w/ gc_merge mount option, we may suffer below
potential deadlock:
Kworker GC trehad Truncator
- f2fs_write_cache_pages
- f2fs_write_single_data_page
- f2fs_do_write_data_page
- folio_start_writeback --- set writeback flag on folio
- f2fs_outplace_write_data
: cached folio in internal bio cache
- f2fs_balance_fs
- wake_up(gc_thread)
: wake up gc thread to run foreground GC
- finish_wait(fggc_wq)
: wait on the waitqueue --- wait on GC thread to finish the work
- truncate_inode_pages_range
- __filemap_get_folio(, FGP_LOCK) --- lock folio
- truncate_inode_partial_folio
- folio_wait_writeback --- wait on writeback being cleared
- do_garbage_collect
- move_data_page
- f2fs_get_lock_data_folio
- lock on folio --- blocked on folio's lock
In order to avoid such deadlock, let's call below functions to commit
cached bios in GC_MERGE path of f2fs_balance_fs() as the same as we did
in NOGC_MERGE path.
- f2fs_submit_merged_write(sbi, DATA);
- f2fs_submit_all_merged_ipu_writes(sbi); |
| A vulnerability was found in itsourcecode Hospital Management System 1.0. Affected by this vulnerability is an unknown functionality of the file /viewpaymentreport.php. Performing a manipulation of the argument delid results in sql injection. It is possible to initiate the attack remotely. The exploit has been made public and could be used. |
| The WP-Lister Lite for eBay plugin for WordPress is vulnerable to generic SQL Injection via the 'orderby' parameter in all versions up to, and including, 3.8.8 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with shop manager-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| stoatchat before 0.15.0 contains a permission bypass vulnerability in the message_fetch route that checks only ViewChannel permission instead of requiring ReadMessageHistory. Attackers with ViewChannel access but ReadMessageHistory denied can retrieve individual message content by ID, bypassing the intended history restriction enforced by bulk read routes. |
