| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm: swap: fix race between free_swap_and_cache() and swapoff()
There was previously a theoretical window where swapoff() could run and
teardown a swap_info_struct while a call to free_swap_and_cache() was
running in another thread. This could cause, amongst other bad
possibilities, swap_page_trans_huge_swapped() (called by
free_swap_and_cache()) to access the freed memory for swap_map.
This is a theoretical problem and I haven't been able to provoke it from a
test case. But there has been agreement based on code review that this is
possible (see link below).
Fix it by using get_swap_device()/put_swap_device(), which will stall
swapoff(). There was an extra check in _swap_info_get() to confirm that
the swap entry was not free. This isn't present in get_swap_device()
because it doesn't make sense in general due to the race between getting
the reference and swapoff. So I've added an equivalent check directly in
free_swap_and_cache().
Details of how to provoke one possible issue (thanks to David Hildenbrand
for deriving this):
--8<-----
__swap_entry_free() might be the last user and result in
"count == SWAP_HAS_CACHE".
swapoff->try_to_unuse() will stop as soon as soon as si->inuse_pages==0.
So the question is: could someone reclaim the folio and turn
si->inuse_pages==0, before we completed swap_page_trans_huge_swapped().
Imagine the following: 2 MiB folio in the swapcache. Only 2 subpages are
still references by swap entries.
Process 1 still references subpage 0 via swap entry.
Process 2 still references subpage 1 via swap entry.
Process 1 quits. Calls free_swap_and_cache().
-> count == SWAP_HAS_CACHE
[then, preempted in the hypervisor etc.]
Process 2 quits. Calls free_swap_and_cache().
-> count == SWAP_HAS_CACHE
Process 2 goes ahead, passes swap_page_trans_huge_swapped(), and calls
__try_to_reclaim_swap().
__try_to_reclaim_swap()->folio_free_swap()->delete_from_swap_cache()->
put_swap_folio()->free_swap_slot()->swapcache_free_entries()->
swap_entry_free()->swap_range_free()->
...
WRITE_ONCE(si->inuse_pages, si->inuse_pages - nr_entries);
What stops swapoff to succeed after process 2 reclaimed the swap cache
but before process1 finished its call to swap_page_trans_huge_swapped()?
--8<----- |
| In the Linux kernel, the following vulnerability has been resolved:
net: esp: fix bad handling of pages from page_pool
When the skb is reorganized during esp_output (!esp->inline), the pages
coming from the original skb fragments are supposed to be released back
to the system through put_page. But if the skb fragment pages are
originating from a page_pool, calling put_page on them will trigger a
page_pool leak which will eventually result in a crash.
This leak can be easily observed when using CONFIG_DEBUG_VM and doing
ipsec + gre (non offloaded) forwarding:
BUG: Bad page state in process ksoftirqd/16 pfn:1451b6
page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6
flags: 0x200000000000000(node=0|zone=2)
page_type: 0xffffffff()
raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000
raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000
page dumped because: page_pool leak
Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core]
CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x36/0x50
bad_page+0x70/0xf0
free_unref_page_prepare+0x27a/0x460
free_unref_page+0x38/0x120
esp_ssg_unref.isra.0+0x15f/0x200
esp_output_tail+0x66d/0x780
esp_xmit+0x2c5/0x360
validate_xmit_xfrm+0x313/0x370
? validate_xmit_skb+0x1d/0x330
validate_xmit_skb_list+0x4c/0x70
sch_direct_xmit+0x23e/0x350
__dev_queue_xmit+0x337/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x25e/0x580
iptunnel_xmit+0x19b/0x240
ip_tunnel_xmit+0x5fb/0xb60
ipgre_xmit+0x14d/0x280 [ip_gre]
dev_hard_start_xmit+0xc3/0x1c0
__dev_queue_xmit+0x208/0xba0
? nf_hook_slow+0x3f/0xd0
ip_finish_output2+0x1ca/0x580
ip_sublist_rcv_finish+0x32/0x40
ip_sublist_rcv+0x1b2/0x1f0
? ip_rcv_finish_core.constprop.0+0x460/0x460
ip_list_rcv+0x103/0x130
__netif_receive_skb_list_core+0x181/0x1e0
netif_receive_skb_list_internal+0x1b3/0x2c0
napi_gro_receive+0xc8/0x200
gro_cell_poll+0x52/0x90
__napi_poll+0x25/0x1a0
net_rx_action+0x28e/0x300
__do_softirq+0xc3/0x276
? sort_range+0x20/0x20
run_ksoftirqd+0x1e/0x30
smpboot_thread_fn+0xa6/0x130
kthread+0xcd/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x31/0x50
? kthread_complete_and_exit+0x20/0x20
ret_from_fork_asm+0x11/0x20
</TASK>
The suggested fix is to introduce a new wrapper (skb_page_unref) that
covers page refcounting for page_pool pages as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wireguard: netlink: access device through ctx instead of peer
The previous commit fixed a bug that led to a NULL peer->device being
dereferenced. It's actually easier and faster performance-wise to
instead get the device from ctx->wg. This semantically makes more sense
too, since ctx->wg->peer_allowedips.seq is compared with
ctx->allowedips_seq, basing them both in ctx. This also acts as a
defence in depth provision against freed peers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/vma: Fix UAF on destroy against retire race
Object debugging tools were sporadically reporting illegal attempts to
free a still active i915 VMA object when parking a GT believed to be idle.
[161.359441] ODEBUG: free active (active state 0) object: ffff88811643b958 object type: i915_active hint: __i915_vma_active+0x0/0x50 [i915]
[161.360082] WARNING: CPU: 5 PID: 276 at lib/debugobjects.c:514 debug_print_object+0x80/0xb0
...
[161.360304] CPU: 5 PID: 276 Comm: kworker/5:2 Not tainted 6.5.0-rc1-CI_DRM_13375-g003f860e5577+ #1
[161.360314] Hardware name: Intel Corporation Rocket Lake Client Platform/RocketLake S UDIMM 6L RVP, BIOS RKLSFWI1.R00.3173.A03.2204210138 04/21/2022
[161.360322] Workqueue: i915-unordered __intel_wakeref_put_work [i915]
[161.360592] RIP: 0010:debug_print_object+0x80/0xb0
...
[161.361347] debug_object_free+0xeb/0x110
[161.361362] i915_active_fini+0x14/0x130 [i915]
[161.361866] release_references+0xfe/0x1f0 [i915]
[161.362543] i915_vma_parked+0x1db/0x380 [i915]
[161.363129] __gt_park+0x121/0x230 [i915]
[161.363515] ____intel_wakeref_put_last+0x1f/0x70 [i915]
That has been tracked down to be happening when another thread is
deactivating the VMA inside __active_retire() helper, after the VMA's
active counter has been already decremented to 0, but before deactivation
of the VMA's object is reported to the object debugging tool.
We could prevent from that race by serializing i915_active_fini() with
__active_retire() via ref->tree_lock, but that wouldn't stop the VMA from
being used, e.g. from __i915_vma_retire() called at the end of
__active_retire(), after that VMA has been already freed by a concurrent
i915_vma_destroy() on return from the i915_active_fini(). Then, we should
rather fix the issue at the VMA level, not in i915_active.
Since __i915_vma_parked() is called from __gt_park() on last put of the
GT's wakeref, the issue could be addressed by holding the GT wakeref long
enough for __active_retire() to complete before that wakeref is released
and the GT parked.
I believe the issue was introduced by commit d93939730347 ("drm/i915:
Remove the vma refcount") which moved a call to i915_active_fini() from
a dropped i915_vma_release(), called on last put of the removed VMA kref,
to i915_vma_parked() processing path called on last put of a GT wakeref.
However, its visibility to the object debugging tool was suppressed by a
bug in i915_active that was fixed two weeks later with commit e92eb246feb9
("drm/i915/active: Fix missing debug object activation").
A VMA associated with a request doesn't acquire a GT wakeref by itself.
Instead, it depends on a wakeref held directly by the request's active
intel_context for a GT associated with its VM, and indirectly on that
intel_context's engine wakeref if the engine belongs to the same GT as the
VMA's VM. Those wakerefs are released asynchronously to VMA deactivation.
Fix the issue by getting a wakeref for the VMA's GT when activating it,
and putting that wakeref only after the VMA is deactivated. However,
exclude global GTT from that processing path, otherwise the GPU never goes
idle. Since __i915_vma_retire() may be called from atomic contexts, use
async variant of wakeref put. Also, to avoid circular locking dependency,
take care of acquiring the wakeref before VM mutex when both are needed.
v7: Add inline comments with justifications for:
- using untracked variants of intel_gt_pm_get/put() (Nirmoy),
- using async variant of _put(),
- not getting the wakeref in case of a global GTT,
- always getting the first wakeref outside vm->mutex.
v6: Since __i915_vma_active/retire() callbacks are not serialized, storing
a wakeref tracking handle inside struct i915_vma is not safe, and
there is no other good place for that. Use untracked variants of
intel_gt_pm_get/put_async().
v5: Replace "tile" with "GT" across commit description (Rodrigo),
-
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix command flush on cable pull
System crash due to command failed to flush back to SCSI layer.
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 27 PID: 793455 Comm: kworker/u130:6 Kdump: loaded Tainted: G OE --------- - - 4.18.0-372.9.1.el8.x86_64 #1
Hardware name: HPE ProLiant DL360 Gen10/ProLiant DL360 Gen10, BIOS U32 09/03/2021
Workqueue: nvme-wq nvme_fc_connect_ctrl_work [nvme_fc]
RIP: 0010:__wake_up_common+0x4c/0x190
Code: 24 10 4d 85 c9 74 0a 41 f6 01 04 0f 85 9d 00 00 00 48 8b 43 08 48 83 c3 08 4c 8d 48 e8 49 8d 41 18 48 39 c3 0f 84 f0 00 00 00 <49> 8b 41 18 89 54 24 08 31 ed 4c 8d 70 e8 45 8b 29 41 f6 c5 04 75
RSP: 0018:ffff95f3e0cb7cd0 EFLAGS: 00010086
RAX: 0000000000000000 RBX: ffff8b08d3b26328 RCX: 0000000000000000
RDX: 0000000000000001 RSI: 0000000000000003 RDI: ffff8b08d3b26320
RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffffffffffe8
R10: 0000000000000000 R11: ffff95f3e0cb7a60 R12: ffff95f3e0cb7d20
R13: 0000000000000003 R14: 0000000000000000 R15: 0000000000000000
FS: 0000000000000000(0000) GS:ffff8b2fdf6c0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000002f1e410002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
__wake_up_common_lock+0x7c/0xc0
qla_nvme_ls_req+0x355/0x4c0 [qla2xxx]
qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae1407ca000 from port 21:32:00:02:ac:07:ee:b8 loop_id 0x02 s_id 01:02:00 logout 1 keep 0 els_logo 0
? __nvme_fc_send_ls_req+0x260/0x380 [nvme_fc]
qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:00:02:ac:07:ee:b8 state transitioned from ONLINE to LOST - portid=010200.
? nvme_fc_send_ls_req.constprop.42+0x1a/0x45 [nvme_fc]
qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320002ac07eeb8. rport ffff8ae598122000 roles 1
? nvme_fc_connect_ctrl_work.cold.63+0x1e3/0xa7d [nvme_fc]
qla2xxx [0000:12:00.1]-f084:3: qlt_free_session_done: se_sess 0000000000000000 / sess ffff8ae14801e000 from port 21:32:01:02:ad:f7:ee:b8 loop_id 0x04 s_id 01:02:01 logout 1 keep 0 els_logo 0
? __switch_to+0x10c/0x450
? process_one_work+0x1a7/0x360
qla2xxx [0000:12:00.1]-207d:3: FCPort 21:32:01:02:ad:f7:ee:b8 state transitioned from ONLINE to LOST - portid=010201.
? worker_thread+0x1ce/0x390
? create_worker+0x1a0/0x1a0
qla2xxx [0000:12:00.1]-2109:3: qla2x00_schedule_rport_del 21320102adf7eeb8. rport ffff8ae3b2312800 roles 70
? kthread+0x10a/0x120
qla2xxx [0000:12:00.1]-2112:3: qla_nvme_unregister_remote_port: unregister remoteport on ffff8ae14801e000 21320102adf7eeb8
? set_kthread_struct+0x40/0x40
qla2xxx [0000:12:00.1]-2110:3: remoteport_delete of ffff8ae14801e000 21320102adf7eeb8 completed.
? ret_from_fork+0x1f/0x40
qla2xxx [0000:12:00.1]-f086:3: qlt_free_session_done: waiting for sess ffff8ae14801e000 logout
The system was under memory stress where driver was not able to allocate an
SRB to carry out error recovery of cable pull. The failure to flush causes
upper layer to start modifying scsi_cmnd. When the system frees up some
memory, the subsequent cable pull trigger another command flush. At this
point the driver access a null pointer when attempting to DMA unmap the
SGL.
Add a check to make sure commands are flush back on session tear down to
prevent the null pointer access. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix double free of the ha->vp_map pointer
Coverity scan reported potential risk of double free of the pointer
ha->vp_map. ha->vp_map was freed in qla2x00_mem_alloc(), and again freed
in function qla2x00_mem_free(ha).
Assign NULL to vp_map and kfree take care of NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
The commit mutex should not be released during the critical section
between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC
worker could collect expired objects and get the released commit lock
within the same GC sequence.
nf_tables_module_autoload() temporarily releases the mutex to load
module dependencies, then it goes back to replay the transaction again.
Move it at the end of the abort phase after nft_gc_seq_end() is called. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: do not free live element
Pablo reports a crash with large batches of elements with a
back-to-back add/remove pattern. Quoting Pablo:
add_elem("00000000") timeout 100 ms
...
add_elem("0000000X") timeout 100 ms
del_elem("0000000X") <---------------- delete one that was just added
...
add_elem("00005000") timeout 100 ms
1) nft_pipapo_remove() removes element 0000000X
Then, KASAN shows a splat.
Looking at the remove function there is a chance that we will drop a
rule that maps to a non-deactivated element.
Removal happens in two steps, first we do a lookup for key k and return the
to-be-removed element and mark it as inactive in the next generation.
Then, in a second step, the element gets removed from the set/map.
The _remove function does not work correctly if we have more than one
element that share the same key.
This can happen if we insert an element into a set when the set already
holds an element with same key, but the element mapping to the existing
key has timed out or is not active in the next generation.
In such case its possible that removal will unmap the wrong element.
If this happens, we will leak the non-deactivated element, it becomes
unreachable.
The element that got deactivated (and will be freed later) will
remain reachable in the set data structure, this can result in
a crash when such an element is retrieved during lookup (stale
pointer).
Add a check that the fully matching key does in fact map to the element
that we have marked as inactive in the deactivation step.
If not, we need to continue searching.
Add a bug/warn trap at the end of the function as well, the remove
function must not ever be called with an invisible/unreachable/non-existent
element.
v2: avoid uneeded temporary variable (Stefano) |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix garbage collector racing against connect()
Garbage collector does not take into account the risk of embryo getting
enqueued during the garbage collection. If such embryo has a peer that
carries SCM_RIGHTS, two consecutive passes of scan_children() may see a
different set of children. Leading to an incorrectly elevated inflight
count, and then a dangling pointer within the gc_inflight_list.
sockets are AF_UNIX/SOCK_STREAM
S is an unconnected socket
L is a listening in-flight socket bound to addr, not in fdtable
V's fd will be passed via sendmsg(), gets inflight count bumped
connect(S, addr) sendmsg(S, [V]); close(V) __unix_gc()
---------------- ------------------------- -----------
NS = unix_create1()
skb1 = sock_wmalloc(NS)
L = unix_find_other(addr)
unix_state_lock(L)
unix_peer(S) = NS
// V count=1 inflight=0
NS = unix_peer(S)
skb2 = sock_alloc()
skb_queue_tail(NS, skb2[V])
// V became in-flight
// V count=2 inflight=1
close(V)
// V count=1 inflight=1
// GC candidate condition met
for u in gc_inflight_list:
if (total_refs == inflight_refs)
add u to gc_candidates
// gc_candidates={L, V}
for u in gc_candidates:
scan_children(u, dec_inflight)
// embryo (skb1) was not
// reachable from L yet, so V's
// inflight remains unchanged
__skb_queue_tail(L, skb1)
unix_state_unlock(L)
for u in gc_candidates:
if (u.inflight)
scan_children(u, inc_inflight_move_tail)
// V count=1 inflight=2 (!)
If there is a GC-candidate listening socket, lock/unlock its state. This
makes GC wait until the end of any ongoing connect() to that socket. After
flipping the lock, a possibly SCM-laden embryo is already enqueued. And if
there is another embryo coming, it can not possibly carry SCM_RIGHTS. At
this point, unix_inflight() can not happen because unix_gc_lock is already
taken. Inflight graph remains unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: validate the parameters of bo mapping operations more clearly
Verify the parameters of
amdgpu_vm_bo_(map/replace_map/clearing_mappings) in one common place. |
| In the Linux kernel, the following vulnerability has been resolved:
inet: inet_defrag: prevent sk release while still in use
ip_local_out() and other functions can pass skb->sk as function argument.
If the skb is a fragment and reassembly happens before such function call
returns, the sk must not be released.
This affects skb fragments reassembled via netfilter or similar
modules, e.g. openvswitch or ct_act.c, when run as part of tx pipeline.
Eric Dumazet made an initial analysis of this bug. Quoting Eric:
Calling ip_defrag() in output path is also implying skb_orphan(),
which is buggy because output path relies on sk not disappearing.
A relevant old patch about the issue was :
8282f27449bf ("inet: frag: Always orphan skbs inside ip_defrag()")
[..]
net/ipv4/ip_output.c depends on skb->sk being set, and probably to an
inet socket, not an arbitrary one.
If we orphan the packet in ipvlan, then downstream things like FQ
packet scheduler will not work properly.
We need to change ip_defrag() to only use skb_orphan() when really
needed, ie whenever frag_list is going to be used.
Eric suggested to stash sk in fragment queue and made an initial patch.
However there is a problem with this:
If skb is refragmented again right after, ip_do_fragment() will copy
head->sk to the new fragments, and sets up destructor to sock_wfree.
IOW, we have no choice but to fix up sk_wmem accouting to reflect the
fully reassembled skb, else wmem will underflow.
This change moves the orphan down into the core, to last possible moment.
As ip_defrag_offset is aliased with sk_buff->sk member, we must move the
offset into the FRAG_CB, else skb->sk gets clobbered.
This allows to delay the orphaning long enough to learn if the skb has
to be queued or if the skb is completing the reasm queue.
In the former case, things work as before, skb is orphaned. This is
safe because skb gets queued/stolen and won't continue past reasm engine.
In the latter case, we will steal the skb->sk reference, reattach it to
the head skb, and fix up wmem accouting when inet_frag inflates truesize. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ulpi: Fix debugfs directory leak
The ULPI per-device debugfs root is named after the ulpi device's
parent, but ulpi_unregister_interface tries to remove a debugfs
directory named after the ulpi device itself. This results in the
directory sticking around and preventing subsequent (deferred) probes
from succeeding. Change the directory name to match the ulpi device. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btrtl: fix out of bounds memory access
The problem is detected by KASAN.
btrtl driver uses private hci data to store 'struct btrealtek_data'.
If btrtl driver is used with btusb, then memory for private hci data
is allocated in btusb. But no private data is allocated after hci_dev,
when btrtl is used with hci_h5.
This commit adds memory allocation for hci_h5 case.
==================================================================
BUG: KASAN: slab-out-of-bounds in btrtl_initialize+0x6cc/0x958 [btrtl]
Write of size 8 at addr ffff00000f5a5748 by task kworker/u9:0/76
Hardware name: Pine64 PinePhone (1.2) (DT)
Workqueue: hci0 hci_power_on [bluetooth]
Call trace:
dump_backtrace+0x9c/0x128
show_stack+0x20/0x38
dump_stack_lvl+0x48/0x60
print_report+0xf8/0x5d8
kasan_report+0x90/0xd0
__asan_store8+0x9c/0xc0
[btrtl]
h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
h5_setup+0x50/0x80 [hci_uart]
hci_uart_setup+0xd4/0x260 [hci_uart]
hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
hci_dev_do_open+0x34/0x90 [bluetooth]
hci_power_on+0xc4/0x3c8 [bluetooth]
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Allocated by task 53:
kasan_save_stack+0x3c/0x68
kasan_save_track+0x20/0x40
kasan_save_alloc_info+0x68/0x78
__kasan_kmalloc+0xd4/0xd8
__kmalloc+0x1b4/0x3b0
hci_alloc_dev_priv+0x28/0xa58 [bluetooth]
hci_uart_register_device+0x118/0x4f8 [hci_uart]
h5_serdev_probe+0xf4/0x178 [hci_uart]
serdev_drv_probe+0x54/0xa0
really_probe+0x254/0x588
__driver_probe_device+0xc4/0x210
driver_probe_device+0x64/0x160
__driver_attach_async_helper+0x88/0x158
async_run_entry_fn+0xd0/0x388
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Last potentially related work creation:
kasan_save_stack+0x3c/0x68
__kasan_record_aux_stack+0xb0/0x150
kasan_record_aux_stack_noalloc+0x14/0x20
__queue_work+0x33c/0x960
queue_work_on+0x98/0xc0
hci_recv_frame+0xc8/0x1e8 [bluetooth]
h5_complete_rx_pkt+0x2c8/0x800 [hci_uart]
h5_rx_payload+0x98/0xb8 [hci_uart]
h5_recv+0x158/0x3d8 [hci_uart]
hci_uart_receive_buf+0xa0/0xe8 [hci_uart]
ttyport_receive_buf+0xac/0x178
flush_to_ldisc+0x130/0x2c8
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
Second to last potentially related work creation:
kasan_save_stack+0x3c/0x68
__kasan_record_aux_stack+0xb0/0x150
kasan_record_aux_stack_noalloc+0x14/0x20
__queue_work+0x788/0x960
queue_work_on+0x98/0xc0
__hci_cmd_sync_sk+0x23c/0x7a0 [bluetooth]
__hci_cmd_sync+0x24/0x38 [bluetooth]
btrtl_initialize+0x760/0x958 [btrtl]
h5_btrtl_setup+0xd0/0x2f8 [hci_uart]
h5_setup+0x50/0x80 [hci_uart]
hci_uart_setup+0xd4/0x260 [hci_uart]
hci_dev_open_sync+0x1cc/0xf68 [bluetooth]
hci_dev_do_open+0x34/0x90 [bluetooth]
hci_power_on+0xc4/0x3c8 [bluetooth]
process_one_work+0x328/0x6f0
worker_thread+0x410/0x778
kthread+0x168/0x178
ret_from_fork+0x10/0x20
================================================================== |
| In the Linux kernel, the following vulnerability has been resolved:
dm: call the resume method on internal suspend
There is this reported crash when experimenting with the lvm2 testsuite.
The list corruption is caused by the fact that the postsuspend and resume
methods were not paired correctly; there were two consecutive calls to the
origin_postsuspend function. The second call attempts to remove the
"hash_list" entry from a list, while it was already removed by the first
call.
Fix __dm_internal_resume so that it calls the preresume and resume
methods of the table's targets.
If a preresume method of some target fails, we are in a tricky situation.
We can't return an error because dm_internal_resume isn't supposed to
return errors. We can't return success, because then the "resume" and
"postsuspend" methods would not be paired correctly. So, we set the
DMF_SUSPENDED flag and we fake normal suspend - it may confuse userspace
tools, but it won't cause a kernel crash.
------------[ cut here ]------------
kernel BUG at lib/list_debug.c:56!
invalid opcode: 0000 [#1] PREEMPT SMP
CPU: 1 PID: 8343 Comm: dmsetup Not tainted 6.8.0-rc6 #4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
RIP: 0010:__list_del_entry_valid_or_report+0x77/0xc0
<snip>
RSP: 0018:ffff8881b831bcc0 EFLAGS: 00010282
RAX: 000000000000004e RBX: ffff888143b6eb80 RCX: 0000000000000000
RDX: 0000000000000001 RSI: ffffffff819053d0 RDI: 00000000ffffffff
RBP: ffff8881b83a3400 R08: 00000000fffeffff R09: 0000000000000058
R10: 0000000000000000 R11: ffffffff81a24080 R12: 0000000000000001
R13: ffff88814538e000 R14: ffff888143bc6dc0 R15: ffffffffa02e4bb0
FS: 00000000f7c0f780(0000) GS:ffff8893f0a40000(0000) knlGS:0000000000000000
CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033
CR2: 0000000057fb5000 CR3: 0000000143474000 CR4: 00000000000006b0
Call Trace:
<TASK>
? die+0x2d/0x80
? do_trap+0xeb/0xf0
? __list_del_entry_valid_or_report+0x77/0xc0
? do_error_trap+0x60/0x80
? __list_del_entry_valid_or_report+0x77/0xc0
? exc_invalid_op+0x49/0x60
? __list_del_entry_valid_or_report+0x77/0xc0
? asm_exc_invalid_op+0x16/0x20
? table_deps+0x1b0/0x1b0 [dm_mod]
? __list_del_entry_valid_or_report+0x77/0xc0
origin_postsuspend+0x1a/0x50 [dm_snapshot]
dm_table_postsuspend_targets+0x34/0x50 [dm_mod]
dm_suspend+0xd8/0xf0 [dm_mod]
dev_suspend+0x1f2/0x2f0 [dm_mod]
? table_deps+0x1b0/0x1b0 [dm_mod]
ctl_ioctl+0x300/0x5f0 [dm_mod]
dm_compat_ctl_ioctl+0x7/0x10 [dm_mod]
__x64_compat_sys_ioctl+0x104/0x170
do_syscall_64+0x184/0x1b0
entry_SYSCALL_64_after_hwframe+0x46/0x4e
RIP: 0033:0xf7e6aead
<snip>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srpt: Do not register event handler until srpt device is fully setup
Upon rare occasions, KASAN reports a use-after-free Write
in srpt_refresh_port().
This seems to be because an event handler is registered before the
srpt device is fully setup and a race condition upon error may leave a
partially setup event handler in place.
Instead, only register the event handler after srpt device initialization
is complete. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSv4.2: fix nfs4_listxattr kernel BUG at mm/usercopy.c:102
A call to listxattr() with a buffer size = 0 returns the actual
size of the buffer needed for a subsequent call. When size > 0,
nfs4_listxattr() does not return an error because either
generic_listxattr() or nfs4_listxattr_nfs4_label() consumes
exactly all the bytes then size is 0 when calling
nfs4_listxattr_nfs4_user() which then triggers the following
kernel BUG:
[ 99.403778] kernel BUG at mm/usercopy.c:102!
[ 99.404063] Internal error: Oops - BUG: 00000000f2000800 [#1] SMP
[ 99.408463] CPU: 0 PID: 3310 Comm: python3 Not tainted 6.6.0-61.fc40.aarch64 #1
[ 99.415827] Call trace:
[ 99.415985] usercopy_abort+0x70/0xa0
[ 99.416227] __check_heap_object+0x134/0x158
[ 99.416505] check_heap_object+0x150/0x188
[ 99.416696] __check_object_size.part.0+0x78/0x168
[ 99.416886] __check_object_size+0x28/0x40
[ 99.417078] listxattr+0x8c/0x120
[ 99.417252] path_listxattr+0x78/0xe0
[ 99.417476] __arm64_sys_listxattr+0x28/0x40
[ 99.417723] invoke_syscall+0x78/0x100
[ 99.417929] el0_svc_common.constprop.0+0x48/0xf0
[ 99.418186] do_el0_svc+0x24/0x38
[ 99.418376] el0_svc+0x3c/0x110
[ 99.418554] el0t_64_sync_handler+0x120/0x130
[ 99.418788] el0t_64_sync+0x194/0x198
[ 99.418994] Code: aa0003e3 d000a3e0 91310000 97f49bdb (d4210000)
Issue is reproduced when generic_listxattr() returns 'system.nfs4_acl',
thus calling lisxattr() with size = 16 will trigger the bug.
Add check on nfs4_listxattr() to return ERANGE error when it is
called with size > 0 and the return value is greater than size. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs: fix panic when nfs4_ff_layout_prepare_ds() fails
We've been seeing the following panic in production
BUG: kernel NULL pointer dereference, address: 0000000000000065
PGD 2f485f067 P4D 2f485f067 PUD 2cc5d8067 PMD 0
RIP: 0010:ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
Call Trace:
<TASK>
? __die+0x78/0xc0
? page_fault_oops+0x286/0x380
? __rpc_execute+0x2c3/0x470 [sunrpc]
? rpc_new_task+0x42/0x1c0 [sunrpc]
? exc_page_fault+0x5d/0x110
? asm_exc_page_fault+0x22/0x30
? ff_layout_free_layoutreturn+0x110/0x110 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x3a/0x90 [nfs_layout_flexfiles]
? ff_layout_cancel_io+0x6f/0x90 [nfs_layout_flexfiles]
pnfs_mark_matching_lsegs_return+0x1b0/0x360 [nfsv4]
pnfs_error_mark_layout_for_return+0x9e/0x110 [nfsv4]
? ff_layout_send_layouterror+0x50/0x160 [nfs_layout_flexfiles]
nfs4_ff_layout_prepare_ds+0x11f/0x290 [nfs_layout_flexfiles]
ff_layout_pg_init_write+0xf0/0x1f0 [nfs_layout_flexfiles]
__nfs_pageio_add_request+0x154/0x6c0 [nfs]
nfs_pageio_add_request+0x26b/0x380 [nfs]
nfs_do_writepage+0x111/0x1e0 [nfs]
nfs_writepages_callback+0xf/0x30 [nfs]
write_cache_pages+0x17f/0x380
? nfs_pageio_init_write+0x50/0x50 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
? nfs_writepages+0x6d/0x210 [nfs]
nfs_writepages+0x125/0x210 [nfs]
do_writepages+0x67/0x220
? generic_perform_write+0x14b/0x210
filemap_fdatawrite_wbc+0x5b/0x80
file_write_and_wait_range+0x6d/0xc0
nfs_file_fsync+0x81/0x170 [nfs]
? nfs_file_mmap+0x60/0x60 [nfs]
__x64_sys_fsync+0x53/0x90
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x46/0xb0
Inspecting the core with drgn I was able to pull this
>>> prog.crashed_thread().stack_trace()[0]
#0 at 0xffffffffa079657a (ff_layout_cancel_io+0x3a/0x84) in ff_layout_cancel_io at fs/nfs/flexfilelayout/flexfilelayout.c:2021:27
>>> prog.crashed_thread().stack_trace()[0]['idx']
(u32)1
>>> prog.crashed_thread().stack_trace()[0]['flseg'].mirror_array[1].mirror_ds
(struct nfs4_ff_layout_ds *)0xffffffffffffffed
This is clear from the stack trace, we call nfs4_ff_layout_prepare_ds()
which could error out initializing the mirror_ds, and then we go to
clean it all up and our check is only for if (!mirror->mirror_ds). This
is inconsistent with the rest of the users of mirror_ds, which have
if (IS_ERR_OR_NULL(mirror_ds))
to keep from tripping over this exact scenario. Fix this up in
ff_layout_cancel_io() to make sure we don't panic when we get an error.
I also spot checked all the other instances of checking mirror_ds and we
appear to be doing the correct checks everywhere, only unconditionally
dereferencing mirror_ds when we know it would be valid. |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: make sure to pull inner header in geneve_rx()
syzbot triggered a bug in geneve_rx() [1]
Issue is similar to the one I fixed in commit 8d975c15c0cd
("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")
We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.
pskb_inet_may_pull() makes sure the needed headers are in skb->head.
[1]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline]
BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
geneve_rx drivers/net/geneve.c:279 [inline]
geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108
udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186
udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346
__udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422
udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604
ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:461 [inline]
ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
NF_HOOK include/linux/netfilter.h:314 [inline]
ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
__netif_receive_skb_one_core net/core/dev.c:5534 [inline]
__netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
process_backlog+0x480/0x8b0 net/core/dev.c:5976
__napi_poll+0xe3/0x980 net/core/dev.c:6576
napi_poll net/core/dev.c:6645 [inline]
net_rx_action+0x8b8/0x1870 net/core/dev.c:6778
__do_softirq+0x1b7/0x7c5 kernel/softirq.c:553
do_softirq+0x9a/0xf0 kernel/softirq.c:454
__local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
__dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378
dev_queue_xmit include/linux/netdevice.h:3171 [inline]
packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
packet_snd net/packet/af_packet.c:3081 [inline]
packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b
Uninit was created at:
slab_post_alloc_hook mm/slub.c:3819 [inline]
slab_alloc_node mm/slub.c:3860 [inline]
kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903
kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
__alloc_skb+0x352/0x790 net/core/skbuff.c:651
alloc_skb include/linux/skbuff.h:1296 [inline]
alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394
sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783
packet_alloc_skb net/packet/af_packet.c:2930 [inline]
packet_snd net/packet/af_packet.c:3024 [inline]
packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113
sock_sendmsg_nosec net/socket.c:730 [inline]
__sock_sendmsg net/socket.c:745 [inline]
__sys_sendto+0x735/0xa10 net/socket.c:2191
__do_sys_sendto net/socket.c:2203 [inline]
__se_sys_sendto net/socket.c:2199 [inline]
__x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x63/0x6b |
| In the Linux kernel, the following vulnerability has been resolved:
igc: avoid returning frame twice in XDP_REDIRECT
When a frame can not be transmitted in XDP_REDIRECT
(e.g. due to a full queue), it is necessary to free
it by calling xdp_return_frame_rx_napi.
However, this is the responsibility of the caller of
the ndo_xdp_xmit (see for example bq_xmit_all in
kernel/bpf/devmap.c) and thus calling it inside
igc_xdp_xmit (which is the ndo_xdp_xmit of the igc
driver) as well will lead to memory corruption.
In fact, bq_xmit_all expects that it can return all
frames after the last successfully transmitted one.
Therefore, break for the first not transmitted frame,
but do not call xdp_return_frame_rx_napi in igc_xdp_xmit.
This is equally implemented in other Intel drivers
such as the igb.
There are two alternatives to this that were rejected:
1. Return num_frames as all the frames would have been
transmitted and release them inside igc_xdp_xmit.
While it might work technically, it is not what
the return value is meant to represent (i.e. the
number of SUCCESSFULLY transmitted packets).
2. Rework kernel/bpf/devmap.c and all drivers to
support non-consecutively dropped packets.
Besides being complex, it likely has a negative
performance impact without a significant gain
since it is anyway unlikely that the next frame
can be transmitted if the previous one was dropped.
The memory corruption can be reproduced with
the following script which leads to a kernel panic
after a few seconds. It basically generates more
traffic than a i225 NIC can transmit and pushes it
via XDP_REDIRECT from a virtual interface to the
physical interface where frames get dropped.
#!/bin/bash
INTERFACE=enp4s0
INTERFACE_IDX=`cat /sys/class/net/$INTERFACE/ifindex`
sudo ip link add dev veth1 type veth peer name veth2
sudo ip link set up $INTERFACE
sudo ip link set up veth1
sudo ip link set up veth2
cat << EOF > redirect.bpf.c
SEC("prog")
int redirect(struct xdp_md *ctx)
{
return bpf_redirect($INTERFACE_IDX, 0);
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c redirect.bpf.c -o redirect.bpf.o
sudo ip link set veth2 xdp obj redirect.bpf.o
cat << EOF > pass.bpf.c
SEC("prog")
int pass(struct xdp_md *ctx)
{
return XDP_PASS;
}
char _license[] SEC("license") = "GPL";
EOF
clang -O2 -g -Wall -target bpf -c pass.bpf.c -o pass.bpf.o
sudo ip link set $INTERFACE xdp obj pass.bpf.o
cat << EOF > trafgen.cfg
{
/* Ethernet Header */
0xe8, 0x6a, 0x64, 0x41, 0xbf, 0x46,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
const16(ETH_P_IP),
/* IPv4 Header */
0b01000101, 0, # IPv4 version, IHL, TOS
const16(1028), # IPv4 total length (UDP length + 20 bytes (IP header))
const16(2), # IPv4 ident
0b01000000, 0, # IPv4 flags, fragmentation off
64, # IPv4 TTL
17, # Protocol UDP
csumip(14, 33), # IPv4 checksum
/* UDP Header */
10, 0, 1, 1, # IP Src - adapt as needed
10, 0, 1, 2, # IP Dest - adapt as needed
const16(6666), # UDP Src Port
const16(6666), # UDP Dest Port
const16(1008), # UDP length (UDP header 8 bytes + payload length)
csumudp(14, 34), # UDP checksum
/* Payload */
fill('W', 1000),
}
EOF
sudo trafgen -i trafgen.cfg -b3000MB -o veth1 --cpp |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: Add protection for bmp length out of range
UBSAN load reports an exception of BRK#5515 SHIFT_ISSUE:Bitwise shifts
that are out of bounds for their data type.
vmlinux get_bitmap(b=75) + 712
<net/netfilter/nf_conntrack_h323_asn1.c:0>
vmlinux decode_seq(bs=0xFFFFFFD008037000, f=0xFFFFFFD008037018, level=134443100) + 1956
<net/netfilter/nf_conntrack_h323_asn1.c:592>
vmlinux decode_choice(base=0xFFFFFFD0080370F0, level=23843636) + 1216
<net/netfilter/nf_conntrack_h323_asn1.c:814>
vmlinux decode_seq(f=0xFFFFFFD0080371A8, level=134443500) + 812
<net/netfilter/nf_conntrack_h323_asn1.c:576>
vmlinux decode_choice(base=0xFFFFFFD008037280, level=0) + 1216
<net/netfilter/nf_conntrack_h323_asn1.c:814>
vmlinux DecodeRasMessage() + 304
<net/netfilter/nf_conntrack_h323_asn1.c:833>
vmlinux ras_help() + 684
<net/netfilter/nf_conntrack_h323_main.c:1728>
vmlinux nf_confirm() + 188
<net/netfilter/nf_conntrack_proto.c:137>
Due to abnormal data in skb->data, the extension bitmap length
exceeds 32 when decoding ras message then uses the length to make
a shift operation. It will change into negative after several loop.
UBSAN load could detect a negative shift as an undefined behaviour
and reports exception.
So we add the protection to avoid the length exceeding 32. Or else
it will return out of range error and stop decoding. |
