| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| get-func-name is a module to retrieve a function's name securely and consistently both in NodeJS and the browser. Versions prior to 2.0.1 are subject to a regular expression denial of service (redos) vulnerability which may lead to a denial of service when parsing malicious input. This vulnerability can be exploited when there is an imbalance in parentheses, which results in excessive backtracking and subsequently increases the CPU load and processing time significantly. This vulnerability can be triggered using the following input: '\t'.repeat(54773) + '\t/function/i'. This issue has been addressed in commit `f934b228b` which has been included in releases from 2.0.1. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| snappy-java is a Java port of the snappy, a fast C++ compresser/decompresser developed by Google. The SnappyInputStream was found to be vulnerable to Denial of Service (DoS) attacks when decompressing data with a too large chunk size. Due to missing upper bound check on chunk length, an unrecoverable fatal error can occur. All versions of snappy-java including the latest released version 1.1.10.3 are vulnerable to this issue. A fix has been introduced in commit `9f8c3cf74` which will be included in the 1.1.10.4 release. Users are advised to upgrade. Users unable to upgrade should only accept compressed data from trusted sources. |
|
Due to the implementation of "deriveVaultKey", prior to version 7.10, the generated vault key
would always have the last 16 bytes predetermined to be "arfoobarfoobarfo".
This issue happens because "deriveVaultKey" calls "retrieveCloudKey" (which will always
return "foobarfoobarfoobarfoobarfoobarfo" as the key), and then merges the 32byte
randomly generated key with this key (by takeing 16bytes from each, see "mergeKeys").
This makes the key a lot weaker.
This issue does not persist in devices that were initialized on/after version 7.10, but devices
that were initialized before that and updated to a newer version still have this issue.
Roll an update that enforces the full 32bytes key usage.
|
|
In EVE OS, the “measured boot” mechanism prevents a compromised device from accessing
the encrypted data located in the vault.
As per the “measured boot” design, the PCR values calculated at different stages of the boot
process will change if any of their respective parts are changed.
This includes, among other things, the configuration of the bios, grub, the kernel cmdline,
initrd, and more.
However, this mechanism does not validate the entire rootfs, so an attacker can edit the
filesystem and gain control over the system.
As the default filesystem used by EVE OS is squashfs, this is somewhat harder than an ext4,
which is easily changeable.
This will not stop an attacker, as an attacker can repackage the squashfs with their changes
in it and replace the partition altogether.
This can also be done directly on the device, as the “003-storage-init” container contains the
“mksquashfs” and “unsquashfs” binaries (with the corresponding libs).
An attacker can gain full control over the device without changing the PCR values, thus not
triggering the “measured boot” mechanism, and having full access to the vault.
Note:
This issue was partially fixed in these commits (after disclosure to Zededa), where the config
partition measurement was added to PCR13:
• aa3501d6c57206ced222c33aea15a9169d629141
• 5fef4d92e75838cc78010edaed5247dfbdae1889.
This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot. |
|
Vault Key Sealed With SHA1 PCRs
The measured boot solution implemented in EVE OS leans on a PCR locking mechanism.
Different parts of the system update different PCR values in the TPM, resulting in a unique
value for each PCR entry.
These PCRs are then used in order to seal/unseal a key from the TPM which is used to
encrypt/decrypt the “vault” directory.
This “vault” directory is the most sensitive point in the system and as such, its content should
be protected.
This mechanism is noted in Zededa’s documentation as the “measured boot” mechanism,
designed to protect said “vault”.
The code that’s responsible for generating and fetching the key from the TPM assumes that
SHA256 PCRs are used in order to seal/unseal the key, and as such their presence is being
checked.
The issue here is that the key is not sealed using SHA256 PCRs, but using SHA1 PCRs.
This leads to several issues:
• Machines that have their SHA256 PCRs enabled but SHA1 PCRs disabled, as well
as not sealing their keys at all, meaning the “vault” is not protected from an attacker.
• SHA1 is considered insecure and reduces the complexity level required to unseal the
key in machines which have their SHA1 PCRs enabled.
An attacker can very easily retrieve the contents of the “vault”, which will effectively render
the “measured boot” mechanism meaningless.
|
|
When sealing/unsealing the “vault” key, a list of PCRs is used, which defines which PCRs
are used.
In a previous project, CYMOTIVE found that the configuration is not protected by the secure
boot, and in response Zededa implemented measurements on the config partition that was
mapped to PCR 13.
In that process, PCR 13 was added to the list of PCRs that seal/unseal the key.
In commit “56e589749c6ff58ded862d39535d43253b249acf”, the config partition
measurement moved from PCR 13 to PCR 14, but PCR 14 was not added to the list of
PCRs that seal/unseal the key.
This change makes the measurement of PCR 14 effectively redundant as it would not affect
the sealing/unsealing of the key.
An attacker could modify the config partition without triggering the measured boot, this could
result in the attacker gaining full control over the device with full access to the contents of the
encrypted “vault”
|
|
On boot, the Pillar eve container checks for the existence and content of
“/config/GlobalConfig/global.json”.
If the file exists, it overrides the existing configuration on the device on boot.
This allows an attacker to change the system’s configuration, which also includes some
debug functions.
This could be used to unlock the ssh with custom “authorized_keys” via the
“debug.enable.ssh” key, similar to the “authorized_keys” finding that was noted before.
Other usages include unlocking the usb to enable the keyboard via the “debug.enable.usb”
key, allowing VNC access via the “app.allow.vnc” key, and more.
An attacker could easily enable these debug functionalities without triggering the “measured
boot” mechanism implemented by EVE OS, and without marking the device as “UUD”
(“Unknown Update Detected”).
This is because the “/config” partition is not protected by “measured boot”, it is mutable and it
is not encrypted in any way.
An attacker can gain full control over the device without changing the PCR values, thereby not
triggering the “measured boot” mechanism, and having full access to the vault.
Note:
This issue was partially fixed in these commits (after disclosure to Zededa), where the config
partition measurement was added to PCR13:
• aa3501d6c57206ced222c33aea15a9169d629141
• 5fef4d92e75838cc78010edaed5247dfbdae1889.
This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot. |
|
On boot, the Pillar eve container checks for the existence and content of
“/config/authorized_keys”.
If the file is present, and contains a supported public key, the container will go on to open
port 22 and enable sshd with the given keys as the authorized keys for root login.
An attacker could easily add their own keys and gain full control over the system without
triggering the “measured boot” mechanism implemented by EVE OS, and without marking
the device as “UUD” (“Unknown Update Detected”).
This is because the “/config” partition is not protected by “measured boot”, it is mutable, and
it is not encrypted in any way.
An attacker can gain full control over the device without changing the PCR values, thus not
triggering the “measured boot” mechanism, and having full access to the vault.
Note:
This issue was partially fixed in these commits (after disclosure to Zededa), where the config
partition measurement was added to PCR13:
• aa3501d6c57206ced222c33aea15a9169d629141
• 5fef4d92e75838cc78010edaed5247dfbdae1889.
This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot. |
| PCR14 is not in the list of PCRs that seal/unseal the “vault” key, but
due to the change that was implemented in commit
“7638364bc0acf8b5c481b5ce5fea11ad44ad7fd4”, fixing this issue alone would not solve the
problem of the config partition not being measured correctly.
Also, the “vault” key is sealed/unsealed with SHA1 PCRs instead of
SHA256.
This issue was somewhat mitigated due to all of the PCR extend functions
updating both the values of SHA256 and SHA1 for a given PCR ID.
However, due to the change that was implemented in commit
“7638364bc0acf8b5c481b5ce5fea11ad44ad7fd4”, this is no longer the case for PCR14, as
the code in “measurefs.go” explicitly updates only the SHA256 instance of PCR14, which
means that even if PCR14 were to be added to the list of PCRs sealing/unsealing the “vault”
key, changes to the config partition would still not be measured.
An attacker could modify the config partition without triggering the measured boot, this could
result in the attacker gaining full control over the device with full access to the contents of the
encrypted “vault”
|
| An issue was discovered in Croc through 9.6.5. A sender may place ANSI or CSI escape sequences in a filename to attack the terminal device of a receiver. |
| An issue was discovered in Croc through 9.6.5. A sender may send dangerous new files to a receiver, such as executable content or a .ssh/authorized_keys file. |
| in OpenHarmony v3.2.2 and prior versions allow a local attacker arbitrary file read and write through improper preservation of permissions. |
|
The BIG-IP Edge Client Installer on macOS does not follow best practices for elevating privileges during the installation process. This vulnerability is due to an incomplete fix for CVE-2023-38418. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated
|
| Link following in Zoom Rooms for macOS before version 5.16.0 may allow an authenticated user to conduct an escalation of privilege via local access.
|
| Improper access control in Zoom Mobile App for iOS and Zoom SDKs for iOS before version 5.16.5 may allow an authenticated user to conduct a disclosure of information via network access. |
| Transient DOS while parsing GATT service data when the total amount of memory that is required by the multiple services is greater than the actual size of the services buffer. |
| A vulnerability in the web-based management interface of ClearPass Policy Manager could allow an authenticated remote attacker to conduct SQL injection attacks against the ClearPass Policy Manager instance. An attacker could exploit this vulnerability to obtain and modify sensitive information in the underlying database potentially leading to complete compromise of the ClearPass Policy Manager cluster. |
| A vulnerability in the ClearPass OnGuard Linux agent could allow malicious users on a Linux instance to elevate their user privileges to those of a higher role. A successful exploit allows malicious users to execute arbitrary code with root level privileges on the Linux instance. |
| A cross-site request forgery (CSRF) vulnerability in Jenkins Build Failure Analyzer Plugin 2.4.1 and earlier allows attackers to connect to an attacker-specified hostname and port using attacker-specified username and password. |
| In Jenkins 2.423 and earlier, LTS 2.414.1 and earlier, processing file uploads using MultipartFormDataParser creates temporary files in the default system temporary directory with the default permissions for newly created files, potentially allowing attackers with access to the Jenkins controller file system to read and write the files before they are used. |
