| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Zero former ARG_PTR_TO_{LONG,INT} args in case of error
For all non-tracing helpers which formerly had ARG_PTR_TO_{LONG,INT} as input
arguments, zero the value for the case of an error as otherwise it could leak
memory. For tracing, it is not needed given CAP_PERFMON can already read all
kernel memory anyway hence bpf_get_func_arg() and bpf_get_func_ret() is skipped
in here.
Also, the MTU helpers mtu_len pointer value is being written but also read.
Technically, the MEM_UNINIT should not be there in order to always force init.
Removing MEM_UNINIT needs more verifier rework though: MEM_UNINIT right now
implies two things actually: i) write into memory, ii) memory does not have
to be initialized. If we lift MEM_UNINIT, it then becomes: i) read into memory,
ii) memory must be initialized. This means that for bpf_*_check_mtu() we're
readding the issue we're trying to fix, that is, it would then be able to
write back into things like .rodata BPF maps. Follow-up work will rework the
MEM_UNINIT semantics such that the intent can be better expressed. For now
just clear the *mtu_len on error path which can be lifted later again. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/core: Fix ib_cache_setup_one error flow cleanup
When ib_cache_update return an error, we exit ib_cache_setup_one
instantly with no proper cleanup, even though before this we had
already successfully done gid_table_setup_one, that results in
the kernel WARN below.
Do proper cleanup using gid_table_cleanup_one before returning
the err in order to fix the issue.
WARNING: CPU: 4 PID: 922 at drivers/infiniband/core/cache.c:806 gid_table_release_one+0x181/0x1a0
Modules linked in:
CPU: 4 UID: 0 PID: 922 Comm: c_repro Not tainted 6.11.0-rc1+ #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:gid_table_release_one+0x181/0x1a0
Code: 44 8b 38 75 0c e8 2f cb 34 ff 4d 8b b5 28 05 00 00 e8 23 cb 34 ff 44 89 f9 89 da 4c 89 f6 48 c7 c7 d0 58 14 83 e8 4f de 21 ff <0f> 0b 4c 8b 75 30 e9 54 ff ff ff 48 8 3 c4 10 5b 5d 41 5c 41 5d 41
RSP: 0018:ffffc90002b835b0 EFLAGS: 00010286
RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffffff811c8527
RDX: 0000000000000000 RSI: ffffffff811c8534 RDI: 0000000000000001
RBP: ffff8881011b3d00 R08: ffff88810b3abe00 R09: 205d303839303631
R10: 666572207972746e R11: 72746e6520444947 R12: 0000000000000001
R13: ffff888106390000 R14: ffff8881011f2110 R15: 0000000000000001
FS: 00007fecc3b70800(0000) GS:ffff88813bd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020000340 CR3: 000000010435a001 CR4: 00000000003706b0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
? show_regs+0x94/0xa0
? __warn+0x9e/0x1c0
? gid_table_release_one+0x181/0x1a0
? report_bug+0x1f9/0x340
? gid_table_release_one+0x181/0x1a0
? handle_bug+0xa2/0x110
? exc_invalid_op+0x31/0xa0
? asm_exc_invalid_op+0x16/0x20
? __warn_printk+0xc7/0x180
? __warn_printk+0xd4/0x180
? gid_table_release_one+0x181/0x1a0
ib_device_release+0x71/0xe0
? __pfx_ib_device_release+0x10/0x10
device_release+0x44/0xd0
kobject_put+0x135/0x3d0
put_device+0x20/0x30
rxe_net_add+0x7d/0xa0
rxe_newlink+0xd7/0x190
nldev_newlink+0x1b0/0x2a0
? __pfx_nldev_newlink+0x10/0x10
rdma_nl_rcv_msg+0x1ad/0x2e0
rdma_nl_rcv_skb.constprop.0+0x176/0x210
netlink_unicast+0x2de/0x400
netlink_sendmsg+0x306/0x660
__sock_sendmsg+0x110/0x120
____sys_sendmsg+0x30e/0x390
___sys_sendmsg+0x9b/0xf0
? kstrtouint+0x6e/0xa0
? kstrtouint_from_user+0x7c/0xb0
? get_pid_task+0xb0/0xd0
? proc_fail_nth_write+0x5b/0x140
? __fget_light+0x9a/0x200
? preempt_count_add+0x47/0xa0
__sys_sendmsg+0x61/0xd0
do_syscall_64+0x50/0x110
entry_SYSCALL_64_after_hwframe+0x76/0x7e |
| In the Linux kernel, the following vulnerability has been resolved:
fix bitmap corruption on close_range() with CLOSE_RANGE_UNSHARE
copy_fd_bitmaps(new, old, count) is expected to copy the first
count/BITS_PER_LONG bits from old->full_fds_bits[] and fill
the rest with zeroes. What it does is copying enough words
(BITS_TO_LONGS(count/BITS_PER_LONG)), then memsets the rest.
That works fine, *if* all bits past the cutoff point are
clear. Otherwise we are risking garbage from the last word
we'd copied.
For most of the callers that is true - expand_fdtable() has
count equal to old->max_fds, so there's no open descriptors
past count, let alone fully occupied words in ->open_fds[],
which is what bits in ->full_fds_bits[] correspond to.
The other caller (dup_fd()) passes sane_fdtable_size(old_fdt, max_fds),
which is the smallest multiple of BITS_PER_LONG that covers all
opened descriptors below max_fds. In the common case (copying on
fork()) max_fds is ~0U, so all opened descriptors will be below
it and we are fine, by the same reasons why the call in expand_fdtable()
is safe.
Unfortunately, there is a case where max_fds is less than that
and where we might, indeed, end up with junk in ->full_fds_bits[] -
close_range(from, to, CLOSE_RANGE_UNSHARE) with
* descriptor table being currently shared
* 'to' being above the current capacity of descriptor table
* 'from' being just under some chunk of opened descriptors.
In that case we end up with observably wrong behaviour - e.g. spawn
a child with CLONE_FILES, get all descriptors in range 0..127 open,
then close_range(64, ~0U, CLOSE_RANGE_UNSHARE) and watch dup(0) ending
up with descriptor #128, despite #64 being observably not open.
The minimally invasive fix would be to deal with that in dup_fd().
If this proves to add measurable overhead, we can go that way, but
let's try to fix copy_fd_bitmaps() first.
* new helper: bitmap_copy_and_expand(to, from, bits_to_copy, size).
* make copy_fd_bitmaps() take the bitmap size in words, rather than
bits; it's 'count' argument is always a multiple of BITS_PER_LONG,
so we are not losing any information, and that way we can use the
same helper for all three bitmaps - compiler will see that count
is a multiple of BITS_PER_LONG for the large ones, so it'll generate
plain memcpy()+memset().
Reproducer added to tools/testing/selftests/core/close_range_test.c |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm/dpu: cleanup FB if dpu_format_populate_layout fails
If the dpu_format_populate_layout() fails, then FB is prepared, but not
cleaned up. This ends up leaking the pin_count on the GEM object and
causes a splat during DRM file closure:
msm_obj->pin_count
WARNING: CPU: 2 PID: 569 at drivers/gpu/drm/msm/msm_gem.c:121 update_lru_locked+0xc4/0xcc
[...]
Call trace:
update_lru_locked+0xc4/0xcc
put_pages+0xac/0x100
msm_gem_free_object+0x138/0x180
drm_gem_object_free+0x1c/0x30
drm_gem_object_handle_put_unlocked+0x108/0x10c
drm_gem_object_release_handle+0x58/0x70
idr_for_each+0x68/0xec
drm_gem_release+0x28/0x40
drm_file_free+0x174/0x234
drm_release+0xb0/0x160
__fput+0xc0/0x2c8
__fput_sync+0x50/0x5c
__arm64_sys_close+0x38/0x7c
invoke_syscall+0x48/0x118
el0_svc_common.constprop.0+0x40/0xe0
do_el0_svc+0x1c/0x28
el0_svc+0x4c/0x120
el0t_64_sync_handler+0x100/0x12c
el0t_64_sync+0x190/0x194
irq event stamp: 129818
hardirqs last enabled at (129817): [<ffffa5f6d953fcc0>] console_unlock+0x118/0x124
hardirqs last disabled at (129818): [<ffffa5f6da7dcf04>] el1_dbg+0x24/0x8c
softirqs last enabled at (129808): [<ffffa5f6d94afc18>] handle_softirqs+0x4c8/0x4e8
softirqs last disabled at (129785): [<ffffa5f6d94105e4>] __do_softirq+0x14/0x20
Patchwork: https://patchwork.freedesktop.org/patch/600714/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Using uninitialized value *size when calling amdgpu_vce_cs_reloc
Initialize the size before calling amdgpu_vce_cs_reloc, such as case 0x03000001.
V2: To really improve the handling we would actually
need to have a separate value of 0xffffffff.(Christian) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Avoid uninitialized value in BPF_CORE_READ_BITFIELD
[Changes from V1:
- Use a default branch in the switch statement to initialize `val'.]
GCC warns that `val' may be used uninitialized in the
BPF_CRE_READ_BITFIELD macro, defined in bpf_core_read.h as:
[...]
unsigned long long val; \
[...] \
switch (__CORE_RELO(s, field, BYTE_SIZE)) { \
case 1: val = *(const unsigned char *)p; break; \
case 2: val = *(const unsigned short *)p; break; \
case 4: val = *(const unsigned int *)p; break; \
case 8: val = *(const unsigned long long *)p; break; \
} \
[...]
val; \
} \
This patch adds a default entry in the switch statement that sets
`val' to zero in order to avoid the warning, and random values to be
used in case __builtin_preserve_field_info returns unexpected values
for BPF_FIELD_BYTE_SIZE.
Tested in bpf-next master.
No regressions. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pkey: Wipe sensitive data on failure
Wipe sensitive data from stack also if the copy_to_user() fails. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: E-switch, Create ingress ACL when needed
Currently, ingress acl is used for three features. It is created only
when vport metadata match and prio tag are enabled. But active-backup
lag mode also uses it. It is independent of vport metadata match and
prio tag. And vport metadata match can be disabled using the
following devlink command:
# devlink dev param set pci/0000:08:00.0 name esw_port_metadata \
value false cmode runtime
If ingress acl is not created, will hit panic when creating drop rule
for active-backup lag mode. If always create it, there will be about
5% performance degradation.
Fix it by creating ingress acl when needed. If esw_port_metadata is
true, ingress acl exists, then create drop rule using existing
ingress acl. If esw_port_metadata is false, create ingress acl and
then create drop rule. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: davinci: Don't strip remove function when driver is builtin
Using __exit for the remove function results in the remove callback being
discarded with CONFIG_MMC_DAVINCI=y. When such a device gets unbound (e.g.
using sysfs or hotplug), the driver is just removed without the cleanup
being performed. This results in resource leaks. Fix it by compiling in the
remove callback unconditionally.
This also fixes a W=1 modpost warning:
WARNING: modpost: drivers/mmc/host/davinci_mmc: section mismatch in
reference: davinci_mmcsd_driver+0x10 (section: .data) ->
davinci_mmcsd_remove (section: .exit.text) |
| IBM Security Verify Access Appliance 10.0.0 through 10.0.7 uses uninitialized variables when deploying that could allow a local user to cause a denial of service. IBM X-Force ID: 287318. |
| A crafted URL containing Arabic script and whitespace characters could have hidden the true origin of the page, resulting in a potential spoofing attack. This vulnerability affects Firefox < 133, Firefox ESR < 128.5, Thunderbird < 133, and Thunderbird < 128.5. |
| An attacker could cause a select dropdown to be shown over another tab; this could have led to user confusion and possible spoofing attacks. This vulnerability affects Firefox < 133, Firefox ESR < 128.5, Thunderbird < 133, and Thunderbird < 128.5. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usx2y: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: us122l: Use snd_card_free_when_closed() at disconnection
The USB disconnect callback is supposed to be short and not too-long
waiting. OTOH, the current code uses snd_card_free() at
disconnection, but this waits for the close of all used fds, hence it
can take long. It eventually blocks the upper layer USB ioctls, which
may trigger a soft lockup.
An easy workaround is to replace snd_card_free() with
snd_card_free_when_closed(). This variant returns immediately while
the release of resources is done asynchronously by the card device
release at the last close.
The loop of us122l->mmap_count check is dropped as well. The check is
useless for the asynchronous operation with *_when_closed(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix UB due to uninitialized stack access in ip_vs_protocol_init()
Under certain kernel configurations when building with Clang/LLVM, the
compiler does not generate a return or jump as the terminator
instruction for ip_vs_protocol_init(), triggering the following objtool
warning during build time:
vmlinux.o: warning: objtool: ip_vs_protocol_init() falls through to next function __initstub__kmod_ip_vs_rr__935_123_ip_vs_rr_init6()
At runtime, this either causes an oops when trying to load the ipvs
module or a boot-time panic if ipvs is built-in. This same issue has
been reported by the Intel kernel test robot previously.
Digging deeper into both LLVM and the kernel code reveals this to be a
undefined behavior problem. ip_vs_protocol_init() uses a on-stack buffer
of 64 chars to store the registered protocol names and leaves it
uninitialized after definition. The function calls strnlen() when
concatenating protocol names into the buffer. With CONFIG_FORTIFY_SOURCE
strnlen() performs an extra step to check whether the last byte of the
input char buffer is a null character (commit 3009f891bb9f ("fortify:
Allow strlen() and strnlen() to pass compile-time known lengths")).
This, together with possibly other configurations, cause the following
IR to be generated:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #5 section ".init.text" align 16 !kcfi_type !29 {
%1 = alloca [64 x i8], align 16
...
14: ; preds = %11
%15 = getelementptr inbounds i8, ptr %1, i64 63
%16 = load i8, ptr %15, align 1
%17 = tail call i1 @llvm.is.constant.i8(i8 %16)
%18 = icmp eq i8 %16, 0
%19 = select i1 %17, i1 %18, i1 false
br i1 %19, label %20, label %23
20: ; preds = %14
%21 = call i64 @strlen(ptr noundef nonnull dereferenceable(1) %1) #23
...
23: ; preds = %14, %11, %20
%24 = call i64 @strnlen(ptr noundef nonnull dereferenceable(1) %1, i64 noundef 64) #24
...
}
The above code calculates the address of the last char in the buffer
(value %15) and then loads from it (value %16). Because the buffer is
never initialized, the LLVM GVN pass marks value %16 as undefined:
%13 = getelementptr inbounds i8, ptr %1, i64 63
br i1 undef, label %14, label %17
This gives later passes (SCCP, in particular) more DCE opportunities by
propagating the undef value further, and eventually removes everything
after the load on the uninitialized stack location:
define hidden i32 @ip_vs_protocol_init() local_unnamed_addr #0 section ".init.text" align 16 !kcfi_type !11 {
%1 = alloca [64 x i8], align 16
...
12: ; preds = %11
%13 = getelementptr inbounds i8, ptr %1, i64 63
unreachable
}
In this way, the generated native code will just fall through to the
next function, as LLVM does not generate any code for the unreachable IR
instruction and leaves the function without a terminator.
Zero the on-stack buffer to avoid this possible UB. |
| Improper Input Validation vulnerability in Apache Tomcat. Incorrect error handling for some invalid HTTP priority headers resulted in incomplete clean-up of the failed request which created a memory leak. A large number of such requests could trigger an OutOfMemoryException resulting in a denial of service.
This issue affects Apache Tomcat: from 9.0.76 through 9.0.102, from 10.1.10 through 10.1.39, from 11.0.0-M2 through 11.0.5.
The following versions were EOL at the time the CVE was created but are
known to be affected: 8.5.90 though 8.5.100.
Users are recommended to upgrade to version 9.0.104, 10.1.40 or 11.0.6 which fix the issue. |
| A denial of service vulnerability exists in the NetX Component HTTP server functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects X-CUBE-AZRTOS-F7 NetX Duo Component HTTP Server HTTP server v 1.1.0. This HTTP server implementation is contained in this file - x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\http\nxd_http_server.c |
| A denial of service vulnerability exists in the NetX Component HTTP server functionality of STMicroelectronics X-CUBE-AZRTOS-WL 2.0.0. A specially crafted network packet can lead to denial of service. An attacker can send a malicious packet to trigger this vulnerability.This vulnerability affects X-CUBE-AZRTOS-F7 NetX Duo Web Component HTTP server v 1.1.0. This HTTP server implementation is contained in this file - x-cube-azrtos-f7\Middlewares\ST\netxduo\addons\web\nx_web_http_server.c |
| In the Linux kernel, the following vulnerability has been resolved:
vmxnet3: unregister xdp rxq info in the reset path
vmxnet3 does not unregister xdp rxq info in the
vmxnet3_reset_work() code path as vmxnet3_rq_destroy()
is not invoked in this code path. So, we get below message with a
backtrace.
Missing unregister, handled but fix driver
WARNING: CPU:48 PID: 500 at net/core/xdp.c:182
__xdp_rxq_info_reg+0x93/0xf0
This patch fixes the problem by moving the unregister
code of XDP from vmxnet3_rq_destroy() to vmxnet3_rq_cleanup(). |
| Form validation popups could capture escape key presses. Therefore, spamming form validation messages could be used to prevent users from exiting full-screen mode. This vulnerability affects Firefox < 128 and Thunderbird < 128. |
