| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the EnableTwoFactorAuthRequest SOAP endpoint of Zimbra Collaboration (ZCS) allows an attacker with valid user credentials to bypass Two-Factor Authentication (2FA) protection. The attacker can configure an additional 2FA method (either a third-party authenticator app or email-based 2FA) without presenting a valid authentication token or proving access to an already configured 2FA method. This bypasses 2FA and results in unauthorized access to accounts that are otherwise protected by 2FA. |
| Wazuh is a security detection, visibility, and compliance open source project. From version 4.9.0 to before 4.13.0, the Wazuh API – Agent Configuration in certain configurations allows authenticated users with read-only API roles to retrieve agent enrollment credentials through the /utils/configuration endpoint. These credentials can be used to register new agents within the same Wazuh tenant without requiring elevated permissions through the UI. This issue has been patched in version 4.13.0. |
| A vulnerability, which was classified as critical, has been found in Audi UTR Dashcam 2.0. Affected by this issue is some unknown functionality of the component Command API. The manipulation leads to improper access controls. The attack needs to be done within the local network. The exploit has been disclosed to the public and may be used. Upgrading to version 2.89 and 2.90 is able to address this issue. It is recommended to upgrade the affected component. The vendor was contacted early about these issues and acted very professional. Version 2.89 is fixing this issue for new customers and 2.90 is going to fix it for existing customers. |
| An uncontrolled resource consumption vulnerability affects certain ASUS motherboards using Intel B460, B560, B660, B760, H410, H510, H610, H470, Z590, Z690, Z790, W480, W680 series chipsets. Exploitation requires physical access to internal expansion slots to install a specially crafted device and supporting software utility, and may lead to uncontrolled resource consumption that increases the risk of unauthorized direct memory access (DMA).
Refer to the 'Security Update for UEFI firmware' section on the ASUS Security Advisory for more information. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| Anti-Cheat Expert's Windows kernel module "ACE-BASE.sys" version 1.0.2202.6217 does not perform proper access control when handling system resources. This allows a local attacker to escalate privileges from regular user to System or PPL level. |
| conda-forge infrastructure holds common configurations and settings for key pieces of the conda-forge infrastructure.
Between 2025-02-10 and 2025-04-01, conda-forge infrastructure used the wrong token for Azure's cf-staging access. This bug meant that any feedstock maintainer could upload a package to the conda-forge channel, bypassing our feedstock-token + upload process. The security logs on anaconda.org were check for any packages that were not copied from the cf-staging to the conda-forge channel and none were found. |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| External Secrets Operator is a Kubernetes operator that integrates external secret management systems. From version 0.15.0 to before 0.19.2, a vulnerability was discovered where the List() calls for Kubernetes Secret and SecretStore resources performed by the PushSecret controller did not apply a namespace selector. This flaw allowed an attacker to use label selectors to list and read secrets/secret-stores across the cluster, bypassing intended namespace restrictions. An attacker with the ability to create or update PushSecret resources and control SecretStore configurations could exploit this vulnerability to exfiltrate sensitive data from arbitrary namespaces. This could lead to full disclosure of Kubernetes secrets, including credentials, tokens, and other sensitive information stored in the cluster. This vulnerability has been patched in version 0.19.2. A workaround for this issue includes auditing and restricting RBAC permissions so that only trusted service accounts can create or update PushSecret and SecretStore resources. |
| Polkit authentication dis isabled by default and a race
condition in the Polkit authorization check in versions before v0.69.0 can
lead to the same issues as in CVE-2025-66005. |
| A SAML library not dependent on any frameworks that runs in Node. In version 5.0.1, Node-SAML loads the assertion from the (unsigned) original response document. This is different than the parts that are verified when checking signature. This allows an attacker to modify authentication details within a valid SAML assertion. For example, in one attack it is possible to remove any character from the SAML assertion username. To conduct the attack an attacker would need a validly signed document from the identity provider (IdP). This is fixed in version 5.1.0. |
| In Bonitasoft runtime Community edition, the lack of dynamic permissions causes IDOR vulnerability. Dynamic permissions existed only in Subscription edition and have now been restored in Community edition, where they are not custmizable. |
| Versions of the package fastapi-sso before 0.19.0 are vulnerable to Cross-site Request Forgery (CSRF) due to the improper validation of the OAuth state parameter during the authentication callback. While the get_login_url method allows for state generation, it does not persist the state or bind it to the user's session. Consequently, the verify_and_process method accepts the state received in the query parameters without verifying it against a trusted local value. This allows a remote attacker to trick a victim into visiting a malicious callback URL, which can result in the attacker's account being linked to the victim's internal account. |
| libsignal-service-rs is a Rust version of the libsignal-service-java library which implements the core functionality to communicate with Signal servers. Prior to commit 82d70f6720e762898f34ae76b0894b0297d9b2f8, plaintext content envelopes could be injected by a server or a malicious client, and may have been able to bypass the end-to-end encryption and authentication. The vulnerability is fixed per 82d70f6720e762898f34ae76b0894b0297d9b2f8. The `Metadata` struct contains an additional `was_encrypted` field, which breaks the API, but should be easily resolvable. No known workarounds are available. |
| The MIB3 infotainment unit used in Skoda and Volkswagen vehicles does not incorporate any privilege separation for the proprietary inter-process communication mechanism, leaving attackers with presence in the system an ability to undermine access control restrictions implemented at the operating system level.
The vulnerability was originally discovered in Skoda Superb III car with MIB3 infotainment unit OEM part number 3V0035820. The list of affected MIB3 OEM part numbers is provided in the referenced resources. |
| The Lotus Cars Android app (com.lotus.carsdomestic.intl) 1.2.8 contains an exported component, PushDeepLinkActivity, which is accessible without authentication via ADB or malicious apps. This poses a risk of unintended access to application internals and can cause denial of service or logic abuse. |
| The Booking & Appointment Plugin for WooCommerce plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the 'save_google_calendar_data' function in versions up to, and including, 6.9.0. This makes it possible for authenticated attackers, with subscriber-level permissions or above to update the site options arbitrarily. |
| BCryptPasswordEncoder.matches(CharSequence,String) will incorrectly return true for passwords larger than 72 characters as long as the first 72 characters are the same. |
| Nokia Single RAN AirScale baseband allows an authenticated administrative user access to all physical boards after performing a single login to the baseband system board. The baseband does not re-authenticate the user when they connect from the baseband system board to the baseband capacity boards using the internal bsoc SSH service, which is available only internally within the baseband and through the internal backplane between the boards. The bsoc SSH allows login from one board to another via the baseband internal backplane using an SSH private key present on the baseband system board.
This bsoc SSH capability was previously considered an administrative functionality but has now been restricted to be available only to baseband root-privileged administrators. This restriction mitigates the possibility of misuse with lower-level privileges (e.g., from baseband software images). This mitigation is included starting from release 23R4-SR 3.0 MP and later |
| A vulnerability, which was classified as very critical, was found in IROAD Dash Cam X5 and Dash Cam X6 up to 20250308. This affects an unknown part. The manipulation leads to improper authorization. It is possible to initiate the attack remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
