| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: always resume_all after suspend_all
Need to restore any good queues even if the suspend_all
failed for some. Always run remove_queue as that will
schedule a GPU reset is removing the queue fails.
v2: move resume_all after remove |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_bpf: prevent unbounded recursion in offload rollback
Quan Sun reported [1] a stack overflow in cls_bpf_offload_cmd().
Reproducer on netdevsim: add a skip_sw cls_bpf filter, set the
bpf_tc_accept debugfs knob to 0, then `tc filter replace`. The replace
calls tc_setup_cb_replace() which fails. cls_bpf_offload_cmd() then
swaps prog/oldprog and recursively calls itself to roll back. But
bpf_tc_accept=0 makes the rollback fail too, which triggers yet another
rollback frame with the same arguments, and so on until the stack is
exhausted.
bpf_tc_accept is just a convenient knob for the reproducer. Any driver
whose tc_setup_cb_replace() fails twice in a row can hit the same loop,
so this is not a netdevsim-only issue.
Two ways to fix it:
1) Have the rollback call tc_setup_cb_add() on oldprog instead of
re-entering cls_bpf_offload_cmd().
2) Mark the rollback frame with a flag and skip a second-level
rollback from inside it.
Go with (2). It is the smaller change and keeps the original behaviour:
the rollback still goes through tc_setup_cb_replace(), so the driver
gets one real chance to restore its state. If that attempt also fails,
we just return the original error instead of recursing.
[1]: https://lore.kernel.org/bpf/ce5a6005-3c5e-4696-9e05-eba9461dc860@std.uestc.edu.cn/T/#u |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: fix deadlock waiting for ticket during data relocation
When performing data relocation on a zoned filesystem, BTRFS can deadlock
in handle_reserve_tickets(). The relocation process is waiting on a space
reservation ticket that can never be fulfilled, because the relocation
itself is the operation responsible for freeing up that space.
Fix this by introducing a new flush state,
BTRFS_RESERVE_FLUSH_ZONED_RELOCATION, specifically for data chunk
allocation during zoned relocation. Like
BTRFS_RESERVE_FLUSH_FREE_SPACE_INODE, this state uses
priority_reclaim_data_space() instead of the normal flushing path, which
avoids re-entering the relocation code and breaking the deadlock cycle.
In btrfs_alloc_data_chunk_ondemand(), select this new flush state when the
inode belongs to a data relocation root on a zoned filesystem. |
| In the Linux kernel, the following vulnerability has been resolved:
power: supply: core: fix supplied_from allocations
If dts property power-supplies has multiple values, then accessing to
psy->supplied_from[i-1] in __power_supply_populate_supplied_from will
overrun supplied_from array. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: xilinx: use FIFO occupancy register to determine buffer size
The method the driver uses to determine the size of the FIFO has a
problem. What it currently does is this:
It stops the SPI hardware and writes to the TX FIFO register until TX
FIFO FULL asserts in the status register. But the hardware does not only
have the FIFO, it also has a shift register which can hold a byte. This
can be seen, when writing a byte to the FIFO (while the SPI hardware is
stopped,) the TX FIFO EMPTY is still empty. So, if we have a FIFO size
of 16 for example, the current method returns a 17.
This is a problem, at least when using the driver in irq mode. The same
size determined for the TX FIFO is also assumed for the RX FIFO. When a
SPI transaction wants to write the amount of the FIFO size or more
bytes, the following happens, for example with 16 bytes FIFO size:
The driver stops the SPI hardware and writes 17 bytes to the TX FIFO and
starts the SPI hardware and goes sleep.
The hardware then shifts out 17 bytes (FIFO + shift register) and
simultaneously reads bytes into the RX FIFO, but it only has 16 places,
so it looses one byte. Then TX FIFO empty asserts, wakes the driver
again, which has a fast path and reads 16 bytes from the RX FIFO, but
before reading the last 17th byte (which is lost) it does this:
sr = xspi->read_fn(xspi->regs + XSPI_SR_OFFSET);
if (!(sr & XSPI_SR_RX_EMPTY_MASK)) {
xilinx_spi_rx(xspi);
rx_words--;
}
It reads the status register and checks if the RX FIFO is not empty.
But it is empty in our case. So this check spins in a while loop
forever locking the driver.
This patch fixes the logic to determine the FIFO size. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: topology: Check PCM and DAI name strings before use
Topology objects store several PCM and DAI names in fixed-size UAPI
arrays. Other topology parser paths validate these fields with bounded
strnlen() checks before using them as C strings, but the PCM and DAI
paths still pass some fixed-size arrays directly to strlen(),
devm_kstrdup(), DAI lookup, and diagnostic prints.
A malformed topology blob with a non-NUL-terminated PCM, DAI, or stream
capability name can therefore make the parser read past the end of the
fixed-size field.
Reject unterminated PCM and DAI name fields before consuming them as C
strings. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix kernel BUG in ext4_write_inline_data_end
When the data=journal mount option is used, the ext4_journalled_write_end()
function incorrectly calls ext4_write_inline_data_end() without checking
if the EXT4_STATE_MAY_INLINE_DATA flag is still set on the inode.
If a previous attempt to convert the inline data to an extent failed (e.g.
due to ENOSPC), the EXT4_STATE_MAY_INLINE_DATA flag is cleared, but
the EXT4_INODE_INLINE_DATA flag remains set. In this scenario, the next
call to ext4_write_begin() will not prepare the inline data xattr for
writing, but ext4_journalled_write_end() will incorrectly attempt to write
to it, triggering a BUG_ON(pos + len > EXT4_I(inode)->i_inline_size) in
ext4_write_inline_data() since i_inline_size was not expanded.
Fix this by ensuring that ext4_journalled_write_end() only calls
ext4_write_inline_data_end() if the EXT4_STATE_MAY_INLINE_DATA flag is
set, mirroring the behavior of ext4_write_end() and ext4_da_write_end(). |
| A security flaw has been discovered in itsourcecode Hospital Management System 1.0. Affected is an unknown function of the file /viewmedicine.php. Performing a manipulation of the argument delid results in sql injection. The attack can be initiated remotely. The exploit has been released to the public and may be used for attacks. |
| GitPython before 3.1.54 contains an incomplete denylist in unsafe_git_clone_options that omits --template, allowing attackers to achieve arbitrary command execution during clone operations. Attackers can supply --template pointing to a directory containing malicious post-checkout hooks that execute when git clones the repository. |
| GitPython before 3.1.57 contains an incomplete denylist in the unsafe_git_archive_options guard that omits --add-file and --add-virtual-file options. Attackers can supply these options to Repo.archive() to read arbitrary files from the filesystem and include them in the returned archive. |
| A command injection vulnerability exists in Security Center where a remote, unauthenticated attacker could exploit this issue to execute arbitrary commands on the underlying operating system with the privileges of the service account. |
| A local privilege escalation vulnerability exists in Security Center. An attacker with write access to a specific configuration file could achieve arbitrary code execution with elevated privileges, without requiring further user or victim interaction. |
| A command injection vulnerability exists in Tenable Security Center. An authenticated administrator could modify application configuration values to achieve arbitrary command execution on the underlying operating system when specific backend operations are triggered. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: or vbscript: URIs whose scheme is split by semicolon-less numeric character references such as :, 	, 
, or 
. CGI.unescapeHTML leaves these references encoded, so allowed_uri? reports the URL safe even though a browser decodes an encoded colon or strips encoded whitespace and executes the resulting URI scheme. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| Flowise (packages flowise and flowise-components) in versions <= 3.1.2 contain a sandbox escape in the vm2/@flowiseai/nodevm JavaScript sandbox. An authenticated user with access to the /api/v1/node-custom-function endpoint can escape the sandbox by supplying attacker-controlled executablePath and args parameters to puppeteer.launch(), which internally invokes child_process.spawn() outside the sandbox boundary. This allows execution of arbitrary OS commands as the Flowise process user (root in the official Docker image) and arbitrary host file disclosure via Chromium's file:// URL handling. In versions 3.0.8–3.1.2 exploitation requires ALLOW_BUILTIN_DEP=true; earlier versions are exploitable by default. Fixed in 3.1.3. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, a malicious SSH server can crash a russh client session with a malformed KEX_ECDH_REPLY containing a server ephemeral value that is not 32 bytes long. The client-side Curve25519Kex::compute_shared_secret function in russh/src/kex/curve25519.rs passes the decoded exchange.server_ephemeral value to clone_from_slice without validating its length, causing a deterministic panic before the server host key is verified. The panic terminates the spawned client session task and surfaces as a JoinError, while the embedding process normally remains running. This issue is fixed in version 0.62.4. |
| Astro is a web framework for content-driven websites. From 2.9.0 until 7.1.0, Astro's server-side View Transition CSS generator interpolates animation properties into an inline style element without escaping them for CSS and HTML contexts. An attacker-controlled View Transition animation value such as duration can terminate the generated style element and inject arbitrary HTML or JavaScript. The affected code is packages/astro/src/runtime/server/transition.ts; renderTransition passes sheet.toString() into markHTMLString(), while addAnimationProperty serializes duration through toTimeValue() and also handles easing, direction, delay, fillMode, and name. Exploitation requires an on-demand or server-rendered route to pass attacker-controlled data into a View Transition animation definition and can execute arbitrary JavaScript in the affected application's origin, allowing access to sensitive page data and authenticated actions available to the victim. This issue is fixed in version 7.1.0. |
| A flaw was found in search-v2-api. An unauthenticated attacker can exploit this by sending requests with unique random bearer tokens. Each unique token creates a permanent entry in the unbounded tokenReviews cache, which is not properly cleared. This can lead to memory exhaustion of the search-api pod, resulting in a Denial of Service (DoS). |
| NortheBridge/luminalshine is a Sunshine-compatible game stream host for Moonlight. Prior to version 26.05.0-rc4, a latent gap exists on a default install, the file at `src/platform/windows/misc.cpp` lives at `C:\ProgramData\LuminalShine\config\apps.json` and is created by the `SYSTEM` service. Under Windows' default `C:\ProgramData` inheritance, that gives `BUILTIN\Users` only Read+Execute — not writable — so the canonical EoP doesn't actually trigger on a vanilla install. Version 26.05.0-rc4 contains a patch for the issue. As a workaround, use default condition DACLs for `ProgramData`. |
| Stack-based buffer overflow in Microsoft Office allows an unauthorized attacker to execute code locally. |
