Export limit exceeded: 370108 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22434 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72150 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: sunrpc: fix uninitialized xprt_create_args structure The xprt_create_args structure is allocated on the stack without initialization in rpc_sysfs_xprt_switch_add_xprt_store(). While some fields are manually populated, critical fields like srcaddr, bc_xps, and flags contain uninitialized stack garbage. This can lead to: 1. Kernel panic when xs_setup_xprt() dereferences garbage srcaddr 2. Information leak if srcaddr points to sensitive stack data 3. Unpredictable behavior if flags has random bits set The fix is to zero-initialize the structure to ensure all unused fields are NULL/0, preventing the transport setup code from acting on garbage data. | ||||
| CVE-2026-72155 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: swp: Improve locking user experience In the case of the first block being locked (or the few first blocks), if the user want to fully unlock the device it has two possibilities: - either it asks to unlock the entire device, and this works; - or it asks to unlock just the block(s) that are currently locked, which fails. It fails because the conditions "can_be_top" and "can_be_bottom" are true. Indeed, in this case, we unlock everything, so the TB bit does not matter. However in the current implementation, use_top would be true (as this is the favourite option) and lock_len, which in practice should be reduced down to 0, is set to "nor->params->size - (ofs + len)" which is a positive number. This is wrong. An easy way is to simply add an extra condition. In the unlock() path, if we can achieve the same result from both sides, it means we unlock everything and lock_len must simply be 0. A comment is added to clarify that logic. | ||||
| CVE-2026-72158 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fpga: dfl: add bounds check in dfh_get_param_size() dfh_get_param_size() can return a parameter size larger than the feature region because the loop bounds check is evaluated before incrementing size. If the EOP (End of Parameters) bit is set in the same iteration, the inflated size is returned without re-validation against max. This can cause create_feature_instance() to call memcpy_fromio() with a size exceeding the ioremap'd region when a malicious FPGA device provides crafted DFHv1 parameter headers. Add a bounds check after the size increment to ensure the accumulated size never exceeds the feature boundary. | ||||
| CVE-2026-72167 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: pl353: fix probe resource allocation During probe(), the devm_ioremap() is called with the parent device instead of the current one. So when the module is unloaded, the register area isn't released. Target the pl35x device in the devm_ioremap() instead of its parent. | ||||
| CVE-2026-72169 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: kho: make sure scratch size is always aligned by CMA_MIN_ALIGNMENT_BYTES When using scratch_scale, the scratch sizes are rounded up to CMA_MIN_ALIGNMENT_BYTES since they will be released as MIGRATE_CMA. This is not done when using fixed scratch sizes via command line. This can result in user specifying a size which is not aligned, and thus kernel releasing a pageblock that is only partially scratch. Do the rounding up for both cases in scratch_size_update(). | ||||
| CVE-2026-72173 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs/proc/task_mmu: do not warn on seeing non-migration pmd entry Patch series "mm/hmm: A fix and a selftest", v3. Patch 1 fixes a stale warning present from the time when only migration softleaf entries were supported at the PMD level. Patch 2 adds some code into hmm-tests.c which exercises the pagemap path for PMD device-private entries. This patch (of 2): pagemap_pmd_range_thp() warns if a non-present PMD is not a migration entry. This became false once device-private entries at the PMD level were added. Therefore, remove the stale migration-only assertion. | ||||
| CVE-2026-72176 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/damon/sysfs-schemes: put stats for scheme_add_dirs() internal error damon_sysfs_scheme_add_dirs() setup the tried_regions directory after the stats directory setup is completed. When the tried_regions directory setup is failed, the setup function ensures the reference for the tried regions directory is released. Hence the error path should put references on setup succeeded directory objects, starting from the stats directory. However, the error path is putting the tried_regions directory instead of the stats directory. As a direct result, the stats directory object is leaked. Worse yet, if the tried_regions directory setup failed from the initial allocation, the scheme->tried_regions field remains uninitialized. The following kobject_put(&scheme->tried_regions->kobj) call in the error path will dereference the uninitialized memory. The setup failures should not be common. But once it happens, the consequence is quite bad. Fix this issue by correctly putting the stats directory instead of the tried_regions directory. The issue was discovered [1] by Sashiko. | ||||
| CVE-2026-72180 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/huge_memory: preserve pmd_swp_uffd_wp on device-private PMD downgrade change_non_present_huge_pmd() rewrites a writable device-private PMD swap entry into a readable one without carrying pmd_swp_uffd_wp() across. The PTE-level change_softleaf_pte() does this correctly; mirror that here, matching what copy_huge_pmd() does for the fork path. Without the carry, a plain mprotect() over a UFFD_WP-marked device-private THP strips the bit and the trap is bypassed on swap-in. | ||||
| CVE-2026-72193 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs3: cap RESTART_TABLE free-chain walker at rt->used A crafted NTFS3 disk image triggers an in-kernel infinite loop at mount time, hanging the mounting thread and firing the soft-lockup watchdog within ~22s on multi-CPU hosts (panic with kernel.softlockup_panic=1). The bug is reachable from desktop USB auto-mount on distributions where udisks2 routes the NTFS signature to the in-tree ntfs3 driver (Arch family and an increasing fraction of Fedora / openSUSE / RHEL deployments); CAP_SYS_ADMIN-class manual mount elsewhere. check_rstbl()'s second walker iterates the free-entry singly-linked list headed by rt->first_free with no upper bound on iteration count: for (off = ff; off;) { if (off == RESTART_ENTRY_ALLOCATED) return false; off = le32_to_cpu(*(__le32 *)Add2Ptr(rt, off)); if (off > ts - sizeof(__le32)) return false; } The existing guards cover three exits: end-of-list (off == 0), the in-use marker (off == RESTART_ENTRY_ALLOCATED), and out-of-bounds (off > ts - sizeof(__le32)). None of the three prevents an in-bounds cycle. A crafted on-disk RESTART_TABLE whose free chain contains a self-loop or A->B->A cycle whose offsets satisfy: - in range [sizeof(struct RESTART_TABLE), ts - sizeof(__le32)] - (off - sizeof(struct RESTART_TABLE)) % rsize == 0 passes all existing guards and spins the mount-time thread forever. Reproduced in UML by hand-forging a 2 MB NTFS3 image whose journal RESTART_TABLE first_free = 0x18 and whose entry at offset 0x18 stores 0x18 as its next pointer; mount of the forged image with the in-tree ntfs3 driver never returns. Bound the walker by rt->used. Each entry on a legitimate free chain is unique, and the total slot count is ne = le16_to_cpu (rt->used). A traversal that visits more than ne slots is by construction malformed; reject it as a corrupt RESTART_TABLE. After this patch, mount of the forged image returns with -EINVAL and a log_replay failure message, and mkntfs-produced legitimate images mount cleanly (verified in the same UML harness). | ||||
| CVE-2026-72205 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: free volume-wide resources on fill_super failure ntfs_fill_super()'s err_out_now path frees only the volume struct via kfree(vol), leaving several vol-owned allocations behind on every mount failure: - vol->nls_map, loaded by ntfs_init_fs_context() via load_nls_default() (or replaced by an explicit nls= option in ntfs_parse_param()), is never unload_nls()'d. - vol->volume_label, allocated by load_system_files() through ntfs_ucstonls() once the $Volume name attribute has been parsed, is not released by load_system_files()'s own error labels nor by the fill_super() inline cleanup that only runs on d_make_root() failure. Any later failure inside load_system_files() leaks it. - vol->lcn_empty_bits_per_page was kvfree()'d in unl_upcase_iput_tmp_ino_err_out_now without clearing the pointer, so it could not be folded into a single common cleanup. Because the failure paths never call ntfs_volume_free() and never reach the d_make_root() inline cleanup block (it sits above the label and is jumped over by the load_system_files() / kvmalloc failure gotos), these resources accumulate per failed mount attempt with no chance of recovery short of unloading the module. This is a silent leak: the inodes loaded prior to failure remain hashed but generic_shutdown_super() skips evict_inodes() when sb->s_root is unset, so no CHECK_DATA_CORRUPTION warning is emitted either. Move the per-volume frees down to err_out_now and drop the lcn_empty_bits_per_page kvfree() from the upper label so the cleanup is performed exactly once on every failure path. Using unconditional kvfree() / kfree() / unload_nls() is safe because they all accept NULL and the upper labels that previously freed nls_map (the d_make_root() inline cleanup) already clear the pointer. | ||||
| CVE-2026-72293 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: KVM: s390: vsie: Add missing radix_tree_preload() in _gaccess_shadow_fault() Add missing radix_tree_preload() in _gaccess_shadow_fault() to guarantee forward progress. The core of _gaccess_shadow_fault() has been split into ___gaccess_shadow_fault() in order to simplify locking. | ||||
| CVE-2026-72346 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: bitland-mifs-wmi: Fix NULL pointer dereference during suspend/resume The driver registers two distinct WMI devices: a control device (BITLAND_WMI_CONTROL) and an event device (BITLAND_WMI_EVENT). During the probe phase, the event device handling path returns early before initializing the platform profile device (data->pp_dev), leaving it NULL. However, the PM sleep operations are registered globally for the WMI driver and are triggered for both devices. When entering suspend, the event device invokes bitland_mifs_wmi_suspend(), which passes the uninitialized data->pp_dev (NULL) into laptop_profile_get(). This leads to a NULL pointer dereference inside dev_get_drvdata(), causing a kernel Oops and halting the suspend sequence. Fix this by adding a validity check for data->pp_dev in both the suspend and resume callbacks, safely skipping profile operations for the event device. | ||||
| CVE-2026-72212 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: mm/memory_hotplug: fix incorrect altmap passing in error path In create_altmaps_and_memory_blocks(), when arch_add_memory() succeeds with memmap_on_memory enabled, the vmemmap pages are allocated from params.altmap. If create_memory_block_devices() subsequently fails, the error path calls arch_remove_memory() with a NULL altmap instead of params.altmap. This is a bug that could lead to memory corruption. Since altmap is NULL, vmemmap_free() falls back to freeing the vmemmap pages into the system buddy allocator via free_pages() instead of the altmap. arch_remove_memory() then immediately destroys the physical linear mapping for this memory. This injects unowned pages into the buddy allocator, causing machine checks or memory corruption if the system later attempts to allocate and use those freed pages. Fix this by passing params.altmap to arch_remove_memory() in the error path. | ||||
| CVE-2026-72214 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: power: supply: cpcap-battery: Fix missing nvmem_device_put() causing reference leak In cpcap_battery_detect_battery_type(), the reference to an nvmem device obtained via nvmem_device_find() is not released with nvmem_device_put() on the success or read-failure paths, causing a permanent reference leak. The driver’s retry logic on subsequent battery property reads can compound this leak, preventing the nvmem device from ever being freed. Found by code review. | ||||
| CVE-2026-72219 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: lockd: Plug nlm_file leak when nlm_do_fopen() fails A client can repeatedly drive nlm_do_fopen() failures by presenting file handles that the underlying export rejects. After kzalloc_obj() succeeds in nlm_lookup_file(), the freshly allocated nlm_file is not yet inserted into nlm_files[]. The nlm_do_fopen() failure path jumps to out_unlock, which releases nlm_file_mutex and returns without freeing the allocation, so each failure leaks one nlm_file. Route the failure through out_free so kfree() runs before the function returns. | ||||
| CVE-2026-72229 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: batman-adv: clean untagged VLAN on netdev registration failure When an mesh interface is registered, it creates an untagged struct batadv_meshif_vlan on top of it via the NETDEV_REGISTER notifier. But in this process, another receiver of this notification can veto the registration. The netdev registration will be aborted because of this veto. The register_netdevice() call will try to clean up the net_device using unregister_netdevice_queue() - which only uses the .priv_destructor to free private resources. In this situation, .dellink will not be called. The cleanup of the untagged batadv_meshif_vlan must thefore be done in the destructor to avoid a leak of this object. | ||||
| CVE-2026-72377 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: afs: Remove setting of AS_RELEASE_ALWAYS for symlinks and mountpoints Regular AFS files correctly use afs_file_aops which have release_folio set as netfs_release_folio, so AS_RELEASE_ALWAYS is valid for them when fscache is enabled (set via afs_vnode_set_cache()). Symlinks and mountpoints in AFS use afs_dir_aops, which does not provide a release_folio callback. However, afs_apply_status() unconditionally calls mapping_set_release_always() for these. In such case when memory management code attempts to release folios, filemap_release_folio() checks folio_needs_release() which returns true due to AS_RELEASE_ALWAYS being set. Since there is no release_folio callback, it falls through to try_to_free_buffers(), which at present expects buffer_heads to be not null. For symlinks and mountpoints without buffer_heads, this causes pointer dereference. [dh: Added more bits that were missed] | ||||
| CVE-2026-72392 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: fib6: fix NULL deref in fib6_walk_continue() on multi-batch dump inet6_dump_fib() saves its progress in cb->args[1] as a positional index within the current hash chain. Between batches, a concurrent fib6_new_table() can insert a new table at the chain head, shifting all existing entries. The saved index then lands on a different table, causing fib6_dump_table() to set w->root to the wrong table while w->node still points into the previous one. fib6_walk_continue() dereferences w->node->parent (NULL) and panics: BUG: kernel NULL pointer dereference, address: 0000000000000008 RIP: 0010:fib6_walk_continue+0x6e/0x170 Call Trace: <TASK> fib6_dump_table.isra.0+0xc5/0x240 inet6_dump_fib+0xf6/0x420 rtnl_dumpit+0x30/0xa0 netlink_dump+0x15b/0x460 netlink_recvmsg+0x1d6/0x2a0 ____sys_recvmsg+0x17a/0x190 Fix by storing tb->tb6_id in cb->args[1] instead of a positional index. On resume, skip entries until the id matches; a concurrent head-insert can never match the saved id, so the walker always resumes on the correct table. | ||||
| CVE-2026-72241 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: leds: uleds: Fix potential buffer overread The name string supplied by userspace is not guaranteed to be null-terminated, so using strchr() on it might result in a buffer overread. The same thing will happen when said string is used by the LED class device. Fix this by using strnchr() instead and explicitly check that the name string is properly null-terminated. | ||||
| CVE-2026-72256 | 1 Linux | 1 Linux Kernel | 2026-08-15 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: netfilter: xt_cluster: reject template conntracks in hash match xt_cluster_mt() treats any non-NULL nf_ct_get() result as a fully initialized conntrack and passes it to xt_cluster_hash(). This causes a state confusion bug when the raw table CT target attaches a template conntrack to skb->_nfct before normal conntrack processing. Templates carry IPS_TEMPLATE status but do not have a valid tuple for hashing yet, so xt_cluster_hash() can hit its WARN_ON() path on the zeroed l3num field. Reject template conntracks before hashing them. This matches existing netfilter handling for template objects and avoids hashing incomplete conntrack state. | ||||