Export limit exceeded: 369941 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (2351 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-68323 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tipc: serialize udp bearer replicast list updates tipc_udp_rcast_add() and cleanup_bearer() both update ub->rcast.list with list_add_rcu() / list_del_rcu(), but nothing serializes them. The add runs from the encap receive softirq (via tipc_udp_rcast_disc()) without rtnl_lock(), so it can race the cleanup delete and corrupt the list: list_del corruption. prev->next should be ffff8880298d7ab8, but was ffff88802449ad38. (prev=ffff888027e3ec98) kernel BUG at lib/list_debug.c:62! RIP: __list_del_entry_valid_or_report+0x17a/0x200 Workqueue: events cleanup_bearer Call Trace: cleanup_bearer (net/tipc/udp_media.c:811) process_one_work (kernel/workqueue.c:3302) worker_thread (kernel/workqueue.c:3466) The bearer can be enabled from an unprivileged user namespace, as the TIPCv2 generic-netlink ops carry no GENL_ADMIN_PERM. Add a spinlock to struct udp_bearer and take it around the list_add_rcu() in tipc_udp_rcast_add() and the list_del_rcu() loop in cleanup_bearer() so the two writers can no longer corrupt the list. Reject a duplicate peer under the same lock before allocating, and remove tipc_udp_is_known_peer(). The old lockless pre-check in tipc_udp_rcast_disc() was racy: two softirqs discovering the same peer could both find it absent and add it twice. cleanup_bearer() runs from a workqueue after tipc_udp_disable() clears the bearer's up bit, so an encap softirq can still reach tipc_udp_rcast_add() and add a peer after cleanup_bearer() has already emptied the list, leaking that entry when the bearer is freed. Mark the bearer disabled under rcast_lock once the list is emptied and refuse further additions. | ||||
| CVE-2026-68302 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: amt: re-read skb header pointers after every pull Several AMT receive and transmit paths cache a pointer into the skb head (ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call a helper that can reallocate that head before the cached pointer is used again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all free the old head and move the data, so a pointer taken before the call dangles afterwards and the later access is a use-after-free of the freed head. The affected sites are: amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads iph->saddr. amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/ ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address. amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(), then writes the L2 header. amt_membership_query_handler() caches the AMT header, the outer and inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several pulls, then reads and writes them. amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache ip_hdr()/ipv6_hdr() and the current group record and read the record count from the report header inside the record loop, across the *_mc_may_pull() calls. amt_update_handler() caches ip_hdr() and the AMT membership-update header before pskb_may_pull(), iptunnel_pull_header(), ip_mc_check_igmp() and the report handler, then reads iph->daddr and amtmu->nonce / amtmu->response_mac. Fix each site by either snapshotting the scalar that is used after the pull before the first pull runs, or re-deriving the header pointer from the skb after the last pull that can move the head. Values that are stable across the pull (source and group address, the response MAC and nonce, the record count, the outer source MAC) are snapshotted; pointers that are written through or read repeatedly are re-derived. | ||||
| CVE-2026-68284 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf, sockmap: Fix cork use-after-free in tcp_bpf_sendmsg() tcp_bpf_sendmsg() keeps msg_tx across sk_stream_wait_memory(), which drops and reacquires the socket lock. Its error path tries to decide whether msg_tx names the local temporary message by comparing it with the current value of psock->cork. This comparison is unsafe when two threads send on the same socket: Thread A Thread B msg_tx = psock->cork sk_msg_alloc() fails sk_stream_wait_memory() releases the socket lock acquires the socket lock completes the cork psock->cork = NULL frees the cork reacquires the socket lock msg_tx != psock->cork sk_msg_free(msg_tx) The stale cork is therefore mistaken for the local temporary message and freed again. KASAN reported: BUG: KASAN: slab-use-after-free in sk_msg_free+0x49/0x50 Read of size 4 at addr ffff88810c908800 by task poc/90 Call Trace: sk_msg_free+0x49/0x50 tcp_bpf_sendmsg+0x14f5/0x1cc0 __sys_sendto+0x32c/0x3a0 __x64_sys_sendto+0xdb/0x1b0 Allocated by task 89: __kasan_kmalloc+0x8f/0xa0 tcp_bpf_sendmsg+0x16b3/0x1cc0 Freed by task 91: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 tcp_bpf_sendmsg+0xec3/0x1cc0 msg_tx can only name the stack-local tmp or the shared cork. Check for tmp directly so a changed psock->cork cannot turn a shared message into an apparent local one. | ||||
| CVE-2026-68283 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Fix use-after-free freeing trigger private data Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing event_trigger_data") moved the kfree() of event_trigger_data to a kthread that runs tracepoint_synchronize_unregister() before freeing. That removed the synchronization the trigger .free callbacks used to get implicitly and inline from trigger_data_free(). event_hist_trigger_free(), event_hist_trigger_named_free() and event_enable_trigger_free() free their satellite data (hist_data, cmd_ops, enable_data) right after trigger_data_free() returns. With the synchronization now deferred to the kthread, a concurrent tracepoint handler can still reach that data through the list_del_rcu()'d trigger, causing a use-after-free. The histogram teardown must stay synchronous: remove_hist_vars() and unregister_field_var_hists() have to detach a synthetic event from the histogram before the trigger-removal write returns, otherwise a following command races in and the synthetic-event removal fails with -EBUSY, as the trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait with the correct barrier - tracepoint_synchronize_unregister(), matching the free kthread - before freeing. The enable trigger has no such synchronous requirement, and a blocking synchronize there would re-serialize the path that commit deliberately deferred. Give it an optional private_data_free() callback that the free kthread runs after its grace period, and free enable_data from there. | ||||
| CVE-2026-68266 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Hold a dma-buf reference for imported BOs An imported dma-buf BO is created as a ttm_bo_type_sg BO whose reservation object is the exporter's dma_buf->resv. The importer, however, only takes a dma-buf reference after a successful dma_buf_dynamic_attach(). Until then nothing keeps the exporter alive, so if the exporter is freed while the BO still references its resv, a later access to that resv is a use-after-free: Oops: general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b6b9c Workqueue: ttm ttm_bo_delayed_delete [ttm] RIP: 0010:mutex_can_spin_on_owner+0x3f/0xc0 This can be reached on two paths: - dma_buf_dynamic_attach() fails, or - ttm_bo_init_reserved() fails during BO creation. In both cases the BO already has bo->base.resv pointing at the exporter resv, and sg BOs are always torn down via ttm_bo_delayed_delete(), which locks bo->base.resv asynchronously - potentially after the exporter has been freed. Take the dma-buf reference in xe_bo_init_locked(), before ttm_bo_init_reserved(), so it also covers a creation failure there, and release it in xe_ttm_bo_destroy(). The reference is held for the whole BO lifetime, keeping the shared resv alive on every path. v2: - Reworked the fix to avoid creating the imported sg BO before dma_buf_dynamic_attach() succeeds. - Attach with importer_priv == NULL and make invalidate_mappings ignore incomplete imports. v3: - Dropped the xe-side reordering approach since importer_priv must be valid when dma_buf_dynamic_attach() publishes the attachment. - Per Christian's suggestion on the v1 thread, keyed the check on import_attach rather than removing the sg guard entirely. - Fixes both xe and amdgpu in a single TTM patch. v4: - Moved import_attach check to after dma_resv_copy_fences() so fences are copied before returning for successful imports (Thomas). - Removed exporter-alive claim from commit message (Thomas). v5: - Add drm/xe patch to keep imported sg BOs off the LRU before attach succeeds; the TTM fix alone is not sufficient for xe if the BO is already LRU-visible. (Thomas) v4 patch: https://patchwork.freedesktop.org/patch/736663/?series=169129&rev=2 - Patch 1 (drm/ttm) carries Christian's Reviewed-by from v4. v6: - Reworked the fix based on Thomas' suggestion. Instead of the TTM resv individualization (v1-v5) plus the xe off-LRU/placement handling (v5), just hold a dma-buf reference for the imported BO lifetime so the shared resv can never be freed while the BO still references it. Single xe patch, no TTM change. (Thomas) - Take the reference in xe_bo_init_locked() before ttm_bo_init_reserved() so a TTM creation failure is covered too (Thomas). - Dropped the v5 series (drm/ttm + drm/xe off-LRU); the off-LRU approach also regressed in CI BAT via ttm_bo_pipeline_gutting() creating a ghost BO that outlived the exporter. Link to v5: https://patchwork.freedesktop.org/series/169984/ v7: - Move changelog above --- so it stays in the commit message. - Reorder changelog entries oldest-to-newest. (Thomas) (cherry picked from commit 3516f3fae6be35642f8f06f8a218da6425c0306a) | ||||
| CVE-2026-68201 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: timer: drain a slave's callback before its master detaches it snd_timer_close_locked() drains the closing instance's own in-flight callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a master instance is closed, remove_slave_links() clears each slave's ->timer; the slave's own close then reads timer == NULL and takes the branch that skips the drain entirely (snd_timer_stop_slave() also no-ops on a NULL timer). So a slave whose callback is still running when the master is closed is freed underneath the live callback, leading to use-after-free. Drain the slaves too before remove_slave_links() severs them. snd_timer_stop() has already taken this instance off the active list, so no new slave callback can be queued. Take the slaves off the ack list so a pending one can't fire either, then wait for any that is already in flight. | ||||
| CVE-2026-68198 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: wifi: ath6kl: fix use-after-free in aggr_reset_state() The aggr_reset_state() function uses timer_delete() (non-synchronous) for the aggregation timer before proceeding to delete TID state and before the structure is freed by callers like aggr_module_destroy(). If the timer callback (aggr_timeout) is executing when aggr_reset_state() is called, the callback will continue to access aggr_conn fields like rx_tid[] and stat[] which may be freed immediately after by kfree(aggr_info->aggr_conn) in aggr_module_destroy(). Additionally, the timer callback can re-arm itself via mod_timer() while aggr_reset_state() is running, creating a more complex race condition. Use timer_delete_sync() instead to ensure any running timer callback has completed before returning. | ||||
| CVE-2026-68189 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: Bluetooth: hci_sync: Protect UUID list traversal The hci_sync conversion moved class-of-device and EIR generation from an HCI request built under hdev->lock to asynchronous command sync work. The worker holds hdev->req_lock, but that lock does not serialize access to hdev->uuids against add_uuid() and remove_uuid(), which update the list under hdev->lock. The following interleaving can therefore occur: CPU0 (command sync work) CPU1 (management socket) fetch uuid from the list list_del(&uuid->list) kfree(uuid) read uuid->size KASAN reports the resulting use-after-free: BUG: KASAN: slab-use-after-free in eir_create+0xb8f/0xee0 Read of size 1 at addr ffff88810dbd8620 by task kworker/u17:0/87 Workqueue: hci0 hci_cmd_sync_work Call Trace: eir_create+0xb8f/0xee0 hci_update_eir_sync+0x1c0/0x330 hci_cmd_sync_work+0x13c/0x290 process_one_work+0x63a/0x1070 worker_thread+0x45b/0xd10 Allocated by task 86: __kasan_kmalloc+0x8f/0xa0 add_uuid+0x18a/0x4b0 hci_sock_sendmsg+0x1033/0x1ea0 Freed by task 92: __kasan_slab_free+0x43/0x70 kfree+0x131/0x3c0 remove_uuid+0x25e/0x560 hci_sock_sendmsg+0x1033/0x1ea0 Hold hdev->lock while generating and committing the class-of-device and EIR snapshots. Release it before sending an HCI command, so controller waits do not happen under the device lock. This protects all UUID list walks in these paths and restores the serialization lost in the command sync conversion. | ||||
| CVE-2026-68177 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: tracing: Delay module ref count for "enable_event" trigger Triggers are now delayed from freeing, but can still be triggered until after the RCU grace period has ended. The freeing of the enable_event data is put into the private_data_free() callback, but the put of the module refcount is done immediately. It is possible that if a module is removed that has an event that would enable (or disable) it is still active, it can read the data of the module after it is removed causing a use-after-free bug. Move the trace_event_put_ref() that releases the module into the delayed callback so that the module can not be removed until any reference to its events are finished. | ||||
| CVE-2026-68172 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: arm64: make huge_ptep_get handled unaligned addresses huge_ptep_get() can be handed a virtual address pointing to the middle of a contpmd/contpte mapped hugetlb folio (examples of callers are pagemap_hugetlb_range, page_mapped_in_vma). The arm64 helper rewalks the pgtables in find_num_contig to answer whether the huge pte we have maps a contpmd or a contpte hugetlb folio, and returns CONT_PMDS or CONT_PTES, so that it can collect a/d bits over the contiguous ptes. We can falsely return CONT_PTES instead of CONT_PMDS if the addr is not aligned. On systems where CONT_PTES != CONT_PMDS (meaning page size is 16K), we could collect excess A/D bit state, meaning extra work for the kernel. Even worse, we may iterate beyond the PTE table and dereference a garbage ptep pointer to access physical memory we don't own. Since the ptep pointer is a linear map address, we may run off the end of the linear map or into a hole, dereference a VA not mapped into the kernel pgtables and cause kernel panic. Fix this by aligning the pmdp pointer down to a contpmd base before checking equality with the passed huge pte pointer, to correctly answer whether the huge pte is the base of a contpmd block. | ||||
| CVE-2026-68170 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: mptcp: fix stale skb->sk reference on subflow close The backlog list is updated by mptcp_data_ready() under mptcp_data_lock(). The cleanup of backlog references to a closing subflow, however, was performed in mptcp_close_ssk(), before __mptcp_close_ssk() acquires the ssk lock, and while holding neither the ssk lock nor mptcp_data_lock(). Because that traversal ran without mptcp_data_lock(), concurrent softirq RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready() -> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog entry referencing the ssk while the cleanup loop was in progress. Such an entry could be missed by the cleanup, or the concurrent list update could corrupt the traversal, leaving skb->sk pointing at the ssk after it is freed. A later mptcp_backlog_purge() then dereferences the stale pointer, triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0) followed by a use-after-free in mptcp_backlog_purge(). Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after subflow->closing is set to 1 and while the ssk lock is still held, serialized under mptcp_data_lock(). The cleanup runs only on the push path (MPTCP_CF_PUSH), where backlog references accumulate; on other teardown paths the caller already handles cleanup. With subflow->closing set and mptcp_data_lock() held across the purge, any concurrent mptcp_data_ready() either completes its enqueue before the purge runs and is caught, or observes closing=1 and bails out. Once mptcp_data_unlock() is reached, no new skb referencing the ssk can be enqueued, so the cleanup is exhaustive. Remove the unprotected traversal from mptcp_close_ssk() entirely. | ||||
| CVE-2026-68162 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: sctp: avoid auth_enable sysctl UAF during netns teardown proc_sctp_do_auth() updates the SCTP control socket after changing net.sctp.auth_enable. The handler gets the per-net SCTP state from ctl->data, so an already opened sysctl file can still target a network namespace while that namespace is being torn down. SCTP previously registered its per-net sysctls from sctp_defaults_init(), while the control socket is created later from sctp_ctrlsock_init(). This exposed a window during initialization where auth_enable was writable before net->sctp.ctl_sock existed, and a teardown window where auth_enable stayed writable after inet_ctl_sock_destroy() had released the control socket. Move the per-net SCTP sysctl registration into sctp_ctrlsock_init() after sctp_ctl_sock_init() succeeds, and unregister the sysctl table before destroying the control socket in sctp_ctrlsock_exit(). If sysctl registration fails after the control socket was created, destroy the control socket in the same init path. Make sctp_sysctl_net_unregister() tolerate a missing header and clear the saved pointer so init-error and exit paths can safely share the unregister helper. | ||||
| CVE-2026-68153 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: libceph: remove debugfs files before client teardown ceph_destroy_client() tears down the monitor client before removing the per-client debugfs files. A concurrent read of the monmap debugfs file can enter monmap_show() after ceph_monc_stop() has freed monc->monmap, triggering a use-after-free. Remove the debugfs files before stopping the OSD and monitor clients. debugfs_remove() drains active handlers and prevents new accesses, so the debugfs callbacks can no longer race the rest of client teardown. | ||||
| CVE-2026-68144 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: phonet: pep: fix use-after-free in pep_get_sb() pep_get_sb() doesn't consider that pskb_may_pull() might have relocated the skb data, and continue to access the older pointer, causing UAF. Reproduced under KASAN: BUG: KASAN: slab-use-after-free in pep_get_sb+0x234/0x3b0 Read of size 1 at addr ff11000105510f50 by task repro/157 pep_get_sb+0x234/0x3b0 pipe_handler_do_rcv+0x5f7/0xa10 pep_do_rcv+0x203/0x410 __sk_receive_skb+0x471/0x4a0 phonet_rcv+0x5b3/0x6c0 __netif_receive_skb+0xcc/0x1d0 Refetch the header with skb_header_pointer() after pskb_may_pull(), so the possibly stale pointer is no longer dereferenced. There are better ways to solve this, but, this is the less instrusive one. | ||||
| CVE-2026-68140 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: net/iucv: fix use-after-free of a severed iucv_path af_iucv queues not-yet-received message notifications on iucv->message_q, each holding a raw pointer to the connection's iucv_path. When the peer severs the connection, iucv_sever_path() frees that path with iucv_path_free() but leaves the notifications queued. A later recvmsg() drains message_q via iucv_process_message_q() and hands the stale path to message_receive() -- a use-after-free of the freed iucv_path. Drop the queued notifications when the path is severed; once the path is gone they can no longer be received. This also frees the notifications leaked when a socket is closed with messages still queued. | ||||
| CVE-2026-68137 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: net/x25: fix use-after-free in x25_kill_by_neigh() x25_kill_by_neigh() walks the global X.25 socket list looking for sockets attached to a terminating neighbour. x25_list_lock protects list membership while the lookup is in progress, but it does not pin a socket's lifetime after the lock is dropped. The function currently drops x25_list_lock before calling lock_sock(s). A concurrent close can run x25_release(), remove the same socket from x25_list, and drop the last socket reference in that window. The neighbour teardown path can then lock or inspect a freed struct sock/struct x25_sock. Take sock_hold(s) while x25_list_lock still proves that the list entry is live, then drop the temporary reference after the socket has been locked, rechecked, and released. Recheck x25_sk(s)->neighbour after lock_sock(), because another path may have disconnected the socket before this path acquired the socket lock. Restart the list walk after each disconnect because the list lock was dropped and the previous iterator state may no longer be valid. A QEMU/KASAN run against origin/master reproduced a slab-use-after-free in x25_kill_by_neigh(). | ||||
| CVE-2026-68127 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: ila: reload IPv6 header after pskb_may_pull in checksum adjust ila_csum_adjust_transport() caches ip6h = ipv6_hdr(skb) before calling pskb_may_pull(). On a non-linear skb whose transport header sits in a page fragment, pskb_may_pull() can call __pskb_pull_tail() / pskb_expand_head() and free the old skb head, leaving ip6h dangling; the following get_csum_diff(ip6h, p) then reads freed memory. ila_update_ipv6_locator() uses ip6h (and the iaddr derived from it) again after the csum-adjust call and additionally writes the new locator through that pointer. Impact: a remote IPv6 packet routed through a configured ILA csum-adjust-transport route or receive-side mapping triggers a slab-use-after-free in ila_update_ipv6_locator() (KASAN). The route or mapping requires CAP_NET_ADMIN to configure, but trigger packets are unauthenticated once it exists. Reload ip6h after each pskb_may_pull() in ila_csum_adjust_transport() before the csum-diff read. In ila_update_ipv6_locator() only the ILA_CSUM_ADJUST_TRANSPORT case pulls the skb, so reload ip6h and iaddr in that case alone before the destination-address write; the neutral-map modes never pull and keep their cached pointers. | ||||
| CVE-2026-68121 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: pppoe: reload header pointer after dev_hard_header() pppoe_sendmsg() saves a pointer to the PPPoE header before calling dev_hard_header(). Device header callbacks are allowed to reallocate the skb head, invalidating pointers into it. This can happen when a send is blocked in copy_from_user() while the first non-Ethernet port is added to an empty team device. The team's delegated GRE header callback then expands the skb head. PPPoE subsequently writes six bytes through the stale pointer into the freed head. Reload the PPPoE header through the skb's network-header offset after device header creation. pskb_expand_head() updates that offset when it relocates the head. | ||||
| CVE-2026-68117 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: tipc: clear sock->sk on the failed-insert path in tipc_sk_create() When tipc_sk_create() fails to insert the new socket (tipc_sk_insert() returns non-zero), its error path frees the sk with sk_free() but leaves sock->sk pointing at the freed object: if (tipc_sk_insert(tsk)) { sk_free(sk); pr_warn("Socket create failed; port number exhausted\n"); return -EINVAL; } This is harmless for plain socket(): the syscall layer clears sock->ops before releasing, so tipc_release() is never called. It is not harmless on the accept() path. tipc_accept() creates the pre-allocated child socket with tipc_sk_create(net, new_sock, 0, kern); on failure it leaves new_sock->sk dangling and new_sock->ops non-NULL, and do_accept() then fput()s the new file, so __sock_release() -> tipc_release() runs lock_sock(new_sock->sk) on the freed sk -- a use-after-free write of the sk_lock spinlock. tipc_release() already guards this exact "failed accept() releases a pre-allocated child" case with "if (sk == NULL) return 0;", but the guard is bypassed because tipc_sk_create() left sock->sk non-NULL (dangling) rather than NULL. Clear sock->sk on the failed-insert path so the existing tipc_release() NULL check fires and the use-after-free is avoided. The tipc_sk_insert() failure is reached when the per-netns socket rhashtable hits its max_size (tsk_rht_params.max_size = 1048576, ~2M elements) -- i.e. once a netns holds ~2M TIPC sockets every insert returns -E2BIG. BUG: KASAN: slab-use-after-free in lock_sock_nested (net/core/sock.c:3839) Write of size 8 at addr ffff8880047cdc38 by task init/1 lock_sock_nested (net/core/sock.c:3839) tipc_release (net/tipc/socket.c:638) __sock_release (net/socket.c:710) sock_close (net/socket.c:1501) __fput (fs/file_table.c:512) Allocated by task 1: sk_alloc (net/core/sock.c:2308) tipc_sk_create (net/tipc/socket.c:487) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) Freed by task 1: __sk_destruct (net/core/sock.c:2391) tipc_sk_create (net/tipc/socket.c:504) tipc_accept (net/tipc/socket.c:2744) do_accept (net/socket.c:2034) | ||||
| CVE-2026-68104 | 1 Linux | 1 Linux Kernel | 2026-08-13 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu: invoke pm_genpd_remove() before freeing genpd Call pm_genpd_remove() to unregister from global list prior to releasing acp_genpd memory, and clear the pointer after free. (cherry picked from commit cd8650d7a91ee8b768e202354672553faa5cc1f2) | ||||