Export limit exceeded: 378549 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (23952 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2018-14618 | 4 Canonical, Debian, Haxx and 1 more | 6 Ubuntu Linux, Debian Linux, Libcurl and 3 more | 2026-04-15 | N/A |
| curl before version 7.61.1 is vulnerable to a buffer overrun in the NTLM authentication code. The internal function Curl_ntlm_core_mk_nt_hash multiplies the length of the password by two (SUM) to figure out how large temporary storage area to allocate from the heap. The length value is then subsequently used to iterate over the password and generate output into the allocated storage buffer. On systems with a 32 bit size_t, the math to calculate SUM triggers an integer overflow when the password length exceeds 2GB (2^31 bytes). This integer overflow usually causes a very small buffer to actually get allocated instead of the intended very huge one, making the use of that buffer end up in a heap buffer overflow. (This bug is almost identical to CVE-2017-8816.) | ||||
| CVE-2018-16890 | 8 Canonical, Debian, F5 and 5 more | 11 Ubuntu Linux, Debian Linux, Big-ip Access Policy Manager and 8 more | 2026-04-15 | 7.5 High |
| libcurl versions from 7.36.0 to before 7.64.0 is vulnerable to a heap buffer out-of-bounds read. The function handling incoming NTLM type-2 messages (`lib/vauth/ntlm.c:ntlm_decode_type2_target`) does not validate incoming data correctly and is subject to an integer overflow vulnerability. Using that overflow, a malicious or broken NTLM server could trick libcurl to accept a bad length + offset combination that would lead to a buffer read out-of-bounds. | ||||
| CVE-2019-3822 | 7 Canonical, Debian, Haxx and 4 more | 17 Ubuntu Linux, Debian Linux, Libcurl and 14 more | 2026-04-15 | 9.8 Critical |
| libcurl versions from 7.36.0 to before 7.64.0 are vulnerable to a stack-based buffer overflow. The function creating an outgoing NTLM type-3 header (`lib/vauth/ntlm.c:Curl_auth_create_ntlm_type3_message()`), generates the request HTTP header contents based on previously received data. The check that exists to prevent the local buffer from getting overflowed is implemented wrongly (using unsigned math) and as such it does not prevent the overflow from happening. This output data can grow larger than the local buffer if very large 'nt response' data is extracted from a previous NTLMv2 header provided by the malicious or broken HTTP server. Such a 'large value' needs to be around 1000 bytes or more. The actual payload data copied to the target buffer comes from the NTLMv2 type-2 response header. | ||||
| CVE-2019-3823 | 6 Canonical, Debian, Haxx and 3 more | 9 Ubuntu Linux, Debian Linux, Libcurl and 6 more | 2026-04-15 | N/A |
| libcurl versions from 7.34.0 to before 7.64.0 are vulnerable to a heap out-of-bounds read in the code handling the end-of-response for SMTP. If the buffer passed to `smtp_endofresp()` isn't NUL terminated and contains no character ending the parsed number, and `len` is set to 5, then the `strtol()` call reads beyond the allocated buffer. The read contents will not be returned to the caller. | ||||
| CVE-2026-3190 | 2 Keycloak, Redhat | 3 Keycloak, Build Keycloak, Build Of Keycloak | 2026-04-15 | 4.3 Medium |
| A flaw was found in Keycloak. The User-Managed Access (UMA) 2.0 Protection API endpoint for permission tickets fails to enforce the `uma_protection` role check. This allows any authenticated user with a token issued for a resource server client, even without the `uma_protection` role, to enumerate all permission tickets in the system. This vulnerability partial leads to information disclosure. | ||||
| CVE-2024-5971 | 1 Redhat | 12 Apache Camel Hawtio, Apache Camel Spring Boot, Build Keycloak and 9 more | 2026-04-15 | 7.5 High |
| A vulnerability was found in Undertow, where the chunked response hangs after the body was flushed. The response headers and body were sent but the client would continue waiting as Undertow does not send the expected 0\r\n termination of the chunked response. This results in uncontrolled resource consumption, leaving the server side to a denial of service attack. This happens only with Java 17 TLSv1.3 scenarios. | ||||
| CVE-2024-53259 | 1 Redhat | 2 Acm, Ansible Automation Platform | 2026-04-15 | 6.5 Medium |
| quic-go is an implementation of the QUIC protocol in Go. An off-path attacker can inject an ICMP Packet Too Large packet. Since affected quic-go versions used IP_PMTUDISC_DO, the kernel would then return a "message too large" error on sendmsg, i.e. when quic-go attempts to send a packet that exceeds the MTU claimed in that ICMP packet. By setting this value to smaller than 1200 bytes (the minimum MTU for QUIC), the attacker can disrupt a QUIC connection. Crucially, this can be done after completion of the handshake, thereby circumventing any TCP fallback that might be implemented on the application layer (for example, many browsers fall back to HTTP over TCP if they're unable to establish a QUIC connection). The attacker needs to at least know the client's IP and port tuple to mount an attack. This vulnerability is fixed in 0.48.2. | ||||
| CVE-2024-12905 | 1 Redhat | 2 Openshift Devspaces, Rhdh | 2026-04-15 | 7.5 High |
| An Improper Link Resolution Before File Access ("Link Following") and Improper Limitation of a Pathname to a Restricted Directory ("Path Traversal"). This vulnerability occurs when extracting a maliciously crafted tar file, which can result in unauthorized file writes or overwrites outside the intended extraction directory. The issue is associated with index.js in the tar-fs package. This issue affects tar-fs: from 0.0.0 before 1.16.4, from 2.0.0 before 2.1.2, from 3.0.0 before 3.0.8. | ||||
| CVE-2024-28834 | 1 Redhat | 2 Enterprise Linux, Rhel Eus | 2026-04-15 | 5.3 Medium |
| A flaw was found in GnuTLS. The Minerva attack is a cryptographic vulnerability that exploits deterministic behavior in systems like GnuTLS, leading to side-channel leaks. In specific scenarios, such as when using the GNUTLS_PRIVKEY_FLAG_REPRODUCIBLE flag, it can result in a noticeable step in nonce size from 513 to 512 bits, exposing a potential timing side-channel. | ||||
| CVE-2024-31080 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 7.3 High |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcXIGetSelectedEvents() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. | ||||
| CVE-2024-31081 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 7.3 High |
| A heap-based buffer over-read vulnerability was found in the X.org server's ProcXIPassiveGrabDevice() function. This issue occurs when byte-swapped length values are used in replies, potentially leading to memory leakage and segmentation faults, particularly when triggered by a client with a different endianness. This vulnerability could be exploited by an attacker to cause the X server to read heap memory values and then transmit them back to the client until encountering an unmapped page, resulting in a crash. Despite the attacker's inability to control the specific memory copied into the replies, the small length values typically stored in a 32-bit integer can result in significant attempted out-of-bounds reads. | ||||
| CVE-2024-31083 | 1 Redhat | 6 Enterprise Linux, Rhel Aus, Rhel E4s and 3 more | 2026-04-15 | 7.8 High |
| A use-after-free vulnerability was found in the ProcRenderAddGlyphs() function of Xorg servers. This issue occurs when AllocateGlyph() is called to store new glyphs sent by the client to the X server, potentially resulting in multiple entries pointing to the same non-refcounted glyphs. Consequently, ProcRenderAddGlyphs() may free a glyph, leading to a use-after-free scenario when the same glyph pointer is subsequently accessed. This flaw allows an authenticated attacker to execute arbitrary code on the system by sending a specially crafted request. | ||||
| CVE-2025-32803 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 4 Medium |
| In some cases, Kea log files or lease files may be world-readable. This issue affects Kea versions 2.4.0 through 2.4.1, 2.6.0 through 2.6.2, and 2.7.0 through 2.7.8. | ||||
| CVE-2025-32802 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 6.1 Medium |
| Kea configuration and API directives can be used to overwrite arbitrary files, subject to permissions granted to Kea. Many common configurations run Kea as root, leave the API entry points unsecured by default, and/or place the control sockets in insecure paths. This issue affects Kea versions 2.4.0 through 2.4.1, 2.6.0 through 2.6.2, and 2.7.0 through 2.7.8. | ||||
| CVE-2025-29774 | 1 Redhat | 1 Rhdh | 2026-04-15 | 9.1 Critical |
| xml-crypto is an XML digital signature and encryption library for Node.js. An attacker may be able to exploit a vulnerability in versions prior to 6.0.1, 3.2.1, and 2.1.6 to bypass authentication or authorization mechanisms in systems that rely on xml-crypto for verifying signed XML documents. The vulnerability allows an attacker to modify a valid signed XML message in a way that still passes signature verification checks. For example, it could be used to alter critical identity or access control attributes, enabling an attacker with a valid account to escalate privileges or impersonate another user. Users of versions 6.0.0 and prior should upgrade to version 6.0.1 to receive a fix. Those who are still using v2.x or v3.x should upgrade to patched versions 2.1.6 or 3.2.1, respectively. | ||||
| CVE-2025-1247 | 1 Redhat | 2 Camel Quarkus, Quarkus | 2026-04-15 | 8.3 High |
| A flaw was found in Quarkus REST that allows request parameters to leak between concurrent requests if endpoints use field injection without a CDI scope. This vulnerability allows attackers to manipulate request data, impersonate users, or access sensitive information. | ||||
| CVE-2024-43167 | 1 Redhat | 3 Enterprise Linux, Openshift, Openstack | 2026-04-15 | 2.8 Low |
| DISPUTE NOTE: this issue does not pose a security risk as it (according to analysis by the original software developer, NLnet Labs) falls within the expected functionality and security controls of the application. Red Hat has made a claim that there is a security risk within Red Hat products. NLnet Labs has no further information about the claim, and suggests that affected Red Hat customers refer to available Red Hat documentation or support channels. ORIGINAL DESCRIPTION: A NULL pointer dereference flaw was found in the ub_ctx_set_fwd function in Unbound. This issue could allow an attacker who can invoke specific sequences of API calls to cause a segmentation fault. When certain API functions such as ub_ctx_set_fwd and ub_ctx_resolvconf are called in a particular order, the program attempts to read from a NULL pointer, leading to a crash. This issue can result in a denial of service by causing the application to terminate unexpectedly. | ||||
| CVE-2024-45339 | 1 Redhat | 2 Ocp Tools, Openshift Ai | 2026-04-15 | 7.1 High |
| When logs are written to a widely-writable directory (the default), an unprivileged attacker may predict a privileged process's log file path and pre-create a symbolic link to a sensitive file in its place. When that privileged process runs, it will follow the planted symlink and overwrite that sensitive file. To fix that, glog now causes the program to exit (with status code 2) when it finds that the configured log file already exists. | ||||
| CVE-2023-38037 | 1 Redhat | 3 Logging, Satellite, Satellite Capsule | 2026-04-15 | 3.3 Low |
| ActiveSupport::EncryptedFile writes contents that will be encrypted to a temporary file. The temporary file's permissions are defaulted to the user's current `umask` settings, meaning that it's possible for other users on the same system to read the contents of the temporary file. Attackers that have access to the file system could possibly read the contents of this temporary file while a user is editing it. All users running an affected release should either upgrade or use one of the workarounds immediately. | ||||
| CVE-2025-24898 | 1 Redhat | 1 Enterprise Linux | 2026-04-15 | 4.8 Medium |
| rust-openssl is a set of OpenSSL bindings for the Rust programming language. In affected versions `ssl::select_next_proto` can return a slice pointing into the `server` argument's buffer but with a lifetime bound to the `client` argument. In situations where the `sever` buffer's lifetime is shorter than the `client` buffer's, this can cause a use after free. This could cause the server to crash or to return arbitrary memory contents to the client. The crate`openssl` version 0.10.70 fixes the signature of `ssl::select_next_proto` to properly constrain the output buffer's lifetime to that of both input buffers. Users are advised to upgrade. In standard usage of `ssl::select_next_proto` in the callback passed to `SslContextBuilder::set_alpn_select_callback`, code is only affected if the `server` buffer is constructed *within* the callback. | ||||