| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in the mod_proxy_ftp module in Apache HTTP Server with an attacker controlled backend FTP server.
This issue affects undefined: from 2.4.0 through 2.4.67.
Users are recommended to upgrade to version 2.4.68, which fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: validate rx pkt_type header length
virtbt_rx_handle() reads the leading pkt_type byte from the RX skb
and forwards the remainder to hci_recv_frame() for every
event/ACL/SCO/ISO type, without checking that the remaining payload
is at least the fixed HCI header for that type.
After the preceding patch bounds the backend-supplied used.len to
[1, VIRTBT_RX_BUF_SIZE], a one-byte completion still reaches
hci_recv_frame() with skb->len already pulled to 0. If the byte
happened to be HCI_ACLDATA_PKT, the ACL-vs-ISO classification
fast-path in hci_dev_classify_pkt_type() dereferences
hci_acl_hdr(skb)->handle whenever the HCI device has an active
CIS_LINK, BIS_LINK, or PA_LINK connection, reading two bytes of
uninitialized RX-buffer data. The same hazard exists for every
packet type the driver accepts because none of the switch cases in
virtbt_rx_handle() check skb->len against the per-type minimum HCI
header size before handing the frame to the core.
After stripping pkt_type, require skb->len to cover the fixed
header size for the selected type (event 2, ACL 4, SCO 3, ISO 4)
before calling hci_recv_frame(); drop ratelimited otherwise.
Unknown pkt_type values still take the original kfree_skb() default
path.
Use bt_dev_err_ratelimited() because both the length and pkt_type
values come from an untrusted backend that can otherwise flood the
kernel log. |
| NVIDIA Display Driver for Windows and Linux contains a vulnerability in the kernel mode layer, where a user could cause improper access to GPU resources. A successful exploit of this vulnerability might lead to denial of service, escalation of privileges, information disclosure, data tampering, and code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: usblp: fix uninitialized heap leak via LPGETSTATUS ioctl
Just like in a previous problem in this driver, usblp_ctrl_msg() will
collapse the usb_control_msg() return value to 0/-errno, discarding the
actual number of bytes transferred.
Ideally that short command should be detected and error out, but many
printers are known to send "incorrect" responses back so we can't just
do that.
statusbuf is kmalloc(8) at probe time and never filled before the first
LPGETSTATUS ioctl.
usblp_read_status() requests 1 byte. If a malicious printer responds
with zero bytes, *statusbuf is one byte of stale kmalloc heap,
sign-extended into the local int status, which the LPGETSTATUS path then
copy_to_user()s directly to the ioctl caller.
Fix this all by just zapping out the memory buffer when allocated at
probe time. If a later call does a short read, the data will be
identical to what the device sent it the last time, so there is no
"leak" of information happening. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix scheduling with atomic in timestamp sockopt
Using lock_sock_fast() (atomic context) around sock_set_timestamp()
and sock_set_timestamping() is unsafe, as both helpers can sleep.
Replace lock_sock_fast() with sleepable lock_sock()/release_sock()
to avoid scheduling while atomic panic. |
| In the Linux kernel, the following vulnerability has been resolved:
openvswitch: vport: fix self-deadlock on release of tunnel ports
vports are used concurrently and protected by RCU, so netdev_put()
must happen after the RCU grace period. So, either in an RCU call or
after the synchronize_net(). The rtnl_delete_link() must happen under
RTNL and so can't be executed in RCU context. Calling synchronize_net()
while holding RTNL is not a good idea for performance and system
stability under load in general, so calling netdev_put() in RCU call
is the right solution here.
However,
when the device is deleted, rtnl_unlock() will call netdev_run_todo()
and block until all the references are gone. In the current code this
means that we never reach the call_rcu() and the vport is never freed
and the reference is never released, causing a self-deadlock on device
removal.
Fix that by moving the rcu_call() before the rtnl_unlock(), so the
scheduled RCU callback will be executed when synchronize_net() is
called from the rtnl_unlock()->netdev_run_todo() while the RTNL itself
is already released. |
| Debusine is an integrated solution to build, distribute and maintain a Debian-based distribution. Files managed by debusine are organized into artifacts. The endpoints that create and delete relationships between artifacts enforced no permissions checks beyond being able to see the artifacts in question. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Avoid potential endless loop in convert_chmap_v3()
The convert_chmap_v3() has a loop with its increment size of
cs_desc->wLength, but we forgot to validate cs_desc->wLength itself,
which may lead to potential endless loop by a malformed descriptor.
Add a proper size check to abort the loop for plugging the hole. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
ipmi: Add limits to event and receive message requests
The driver would just fetch events and receive messages until the
BMC said it was done. To avoid issues with BMCs that never say they are
done, add a limit of 10 fetches at a time.
In addition, an si interface has an attn state it can return from the
hardware which is supposed to cause a flag fetch to see if the driver
needs to fetch events or message or a few other things. If the attn
bit gets stuck, it's a similar problem. So allow messages in between
flag fetches so the driver itself doesn't get stuck.
This is a more general fix than the previous fix for the specific bad
BMC, but should fix the more general issue of a BMC that won't stop
saying it has data.
This has been there from the beginning of the driver. It's not a bug
per-se, but it is accounting for bugs in BMCs. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: use safe list iteration in radar detect work
The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to
be freed and removed from the list. Guard against this to avoid a
slab-use-after-free error. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: playstation: Clamp num_touch_reports
A device would never lie about the number of touch reports would it?
If it does the loop in dualshock4_parse_report will read off the end of
the touch_reports array, up to about 2 KiB for the maximum number of 256
loop iteraions. The data that is read is emitted via evdev if the
DS4_TOUCH_POINT_INACTIVE bit happens to be set. Protect against this by
clamping the num_touch_reports value provided by the device to the
maximum size of the touch_reports array. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: stop caching unowned originator pointers in BAT IV
BAT IV keeps the last-hop neighbor address in each neigh_node, but some
paths also cache an originator pointer derived from a temporary lookup.
That pointer is not owned by the neigh_node and may no longer refer to a
live originator entry after purge handling runs.
Stop storing the auxiliary originator pointer in the BAT IV neighbor
state. When BAT IV needs the neighbor originator data, resolve it from
the stored neighbor address and drop the reference again after use.
[sven: avoid bonding logic for outgoing OGM] |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: Fix use-after-free in iris_release_internal_buffers()
The recent change in commit 1dabf00ee206 ("media: iris: gen1: Destroy
internal buffers after FW releases") introduced a regression where
session_release_buf() may free the buffer. The caller,
iris_release_internal_buffers(), continued to access `buffer` after the
call, leading to a potential use-after-free.
Fix this by setting BUF_ATTR_PENDING_RELEASE before calling
session_release_buf(), and reverting the flag if the call fails. This
ensures no dereference occurs after potential freeing. |
| OpenXDMoD is an open framework for collecting and analyzing HPC metrics. An SQL injection vulnerability exists in Open XDMoD versions prior to 10.0.3 that allows an unauthenticated remote attacker to execute arbitrary SQL statements. Exploitation requires no authentication or user interaction and can result in complete compromise of the underlying database. All deployments of Open XDMoD prior to 10.0.3 are impacted. This issue was discovered on 2023-08-03 and patched on 2023-08-04. At this time there is no evidence that this vulnerability has been exploited in the wild. The vulnerability was patched in Open XDMoD 10.0.3 on 2023-08-04. As a workaround, apply the patch manually. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: mpc52xx: fix use-after-free on registration failure
Make sure to disable and free the interrupts in case controller
registration fails to avoid a potential use-after-free and resource
leak.
This issue was flagged by Sashiko when reviewing a controller
deregistration fix. |
| Inappropriate implementation in V8 in Google Chrome prior to 146.0.7680.153 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: fix empty payload in tap skb for non-linear buffers
For non-linear skbs, virtio_transport_build_skb() goes through
virtio_transport_copy_nonlinear_skb() to copy the original payload
in the new skb to be delivered to the vsockmon tap device.
This manually initializes an iov_iter but does not set iov_iter.count.
Since the iov_iter is zero-initialized, the copy length is zero and no
payload is actually copied to the monitor interface, leaving data
un-initialized.
Fix this by removing the linear vs non-linear split and using
skb_copy_datagram_iter() with iov_iter_kvec() for all cases, as
vhost-vsock already does. This handles both linear and non-linear skbs,
properly initializes the iov_iter, and removes the now unused
virtio_transport_copy_nonlinear_skb().
While touching this code, let's also check the return value of
skb_copy_datagram_iter(), even though it's unlikely to fail. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: fix use-after-free of fmt_src during MBPF check
During concurrency testing, multiple instances can run in parallel, and
each instance uses its own inst->lock while the core->lock protects the
list of active instances. The race happens because these locks cover
different scopes, inst->lock protects only the internals of a single
instance, while the Macro Blocks Per Frame (MBPF) checker walks the
core list under core->lock and reads fields like fmt_src->width and
fmt_src->height. At the same time, iris_close() may free fmt_src and
fmt_dst under inst->lock while the instance is still present in the core
list. This allows a situation where the MBPF checker, still iterating
through the core list, reaches an instance whose fmt_src was already
freed by another thread and ends up dereferencing a dangling pointer,
resulting in a use-after-free. This happens because the MBPF checker
assumes that any instance in the core list is fully valid, but the
freeing of fmt_src and fmt_dst without removing the instance from the
core list is not correct.
The correct ordering is to defer freeing fmt_src and fmt_dst until after
the instance has been removed from the core list and all teardown under
the core lock has completed, ensuring that no dangling pointers are ever
exposed during MBPF checks. |
| Use after free in Extensions in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code inside a sandbox via a crafted HTML page. (Chromium security severity: Low) |
