| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Self cross-site scripting (XSS) vulnerability in storage nodes search field. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 37391. |
| Stored cross-site scripting (XSS) vulnerability in unit name. The following products are affected: Acronis Cyber Protect 16 (Linux, Windows) before build 37391. |
| Cross-site Scripting (XSS) - Stored in GitHub repository alextselegidis/easyappointments prior to 1.5.0. |
| Cross-site Scripting (XSS) - Stored in GitHub repository alextselegidis/easyappointments prior to 1.5.0. |
| Dreamer CMS 3.0.1 is vulnerable to stored Cross Site Scripting (XSS). |
| A user may be tricked into opening a malicious FBX file that may exploit a heap buffer overflow vulnerability in Autodesk® FBX® SDK 2020 or prior which may lead to code execution. |
| A user may be tricked into opening a malicious FBX file that may exploit a stack buffer overflow vulnerability in Autodesk® FBX® SDK 2020 or prior which may lead to code execution. |
| Cross Site Scripting vulnerability found in Jbootfly allows attackers to obtain sensitive information via the username parameter. |
| Nanoleaf Desktop App before v1.3.1 was discovered to contain a command injection vulnerability which is exploited via a crafted HTTP request. |
| OX App Suite before 7.10.6-rev20 allows XSS via upsell ads. |
| kvmtool through 39181fc allows an out-of-bounds write, related to virtio/balloon.c and virtio/pci.c. This allows a guest OS user to execute arbitrary code on the host machine. |
| There exists a reflected XSS within the logout functionality of ServiceNow versions lower than Quebec Patch 10 Hotfix 11b, Rome Patch 10 Hotfix 3b, San Diego Patch 9, Tokyo Patch 4, and Utah GA. This enables an unauthenticated remote attacker to execute arbitrary JavaScript code in the browser-based web console. |
| WBCE CMS 1.5.3 has a command execution vulnerability via admin/languages/install.php. |
| An Improper Check or Handling of Exceptional Conditions within the storm control feature of Juniper Networks Junos OS allows an attacker sending a high rate of traffic to cause a Denial of Service. Continued receipt and processing of these packets will create a sustained Denial of Service (DoS) condition. Storm control monitors the level of applicable incoming traffic and compares it with the level specified. If the combined level of the applicable traffic exceeds the specified level, the switch drops packets for the controlled traffic types. This issue affects Juniper Networks Junos OS on QFX10002: All versions prior to 19.3R3-S7; 19.4 versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S6; 20.4 versions prior to 20.4R3-S5; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S3; 21.3 versions prior to 21.3R3; 21.4 versions prior to 21.4R2. |
| An Incorrect Permission Assignment for Critical Resource vulnerability in Juniper Networks Junos OS Evolved allows a local, authenticated low-privileged attacker to copy potentially malicious files into an existing Docker container on the local system. A follow-on administrator could then inadvertently start the Docker container leading to the malicious files being executed as root. This issue only affects systems with Docker configured and enabled, which is not enabled by default. Systems without Docker started are not vulnerable to this issue. This issue affects Juniper Networks Junos OS Evolved: 20.4 versions prior to 20.4R3-S5-EVO; 21.2 versions prior to 21.2R3-EVO; 21.3 versions prior to 21.3R3-EVO; 21.4 versions prior to 21.4R2-EVO. This issue does not affect Juniper Networks Junos OS Evolved versions prior to 19.2R1-EVO. |
| An Improperly Controlled Sequential Memory Allocation vulnerability in the Juniper Networks Deep Packet Inspection-Decoder (JDPI-Decoder) Application Signature component of Junos OS's AppID service on SRX Series devices will stop the JDPI-Decoder from identifying dynamic application traffic, allowing an unauthenticated network-based attacker to send traffic to the target device using the JDPI-Decoder, designed to inspect dynamic application traffic and take action upon this traffic, to instead begin to not take action and to pass the traffic through. An example session can be seen by running the following command and evaluating the output. user@device# run show security flow session source-prefix <address/mask> extensive Session ID: <session ID>, Status: Normal, State: Active Policy name: <name of policy> Dynamic application: junos:UNKNOWN, <<<<< LOOK HERE Please note, the JDPI-Decoder and the AppID SigPack are both affected and both must be upgraded along with the operating system to address the matter. By default, none of this is auto-enabled for automatic updates. This issue affects: Juniper Networks any version of the JDPI-Decoder Engine prior to version 5.7.0-47 with the JDPI-Decoder enabled using any version of the AppID SigPack prior to version 1.550.2-31 (SigPack 3533) on Junos OS on SRX Series: All versions prior to 19.1R3-S10; 19.2 versions prior to 19.2R3-S7; 19.3 versions prior to 19.3R3-S8; 19.4 versions prior to 19.4R3-S11; 20.1 version 20.1R1 and later versions prior to 20.2R3-S7; 20.3 version 20.3R1 and later versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S5; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S1, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; |
| An Improper Check or Handling of Exceptional Conditions vulnerability in packet processing on the network interfaces of Juniper Networks Junos OS on JRR200 route reflector appliances allows an adjacent, network-based attacker sending a specific packet to the device to cause a kernel crash, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition. This issue can only be triggered by an attacker on the local broadcast domain. Packets routed to the device are unable to trigger this crash. This issue affects Juniper Networks Junos OS on JRR200: All versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S4; 21.4 versions prior to 21.4R3-S3; 22.1 versions prior to 22.1R3-S1; 22.2 versions prior to 22.2R2-S2, 22.2R3; 22.3 versions prior to 22.3R1-S2, 22.3R2; 22.4 versions prior to 22.4R1-S1, 22.4R2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the bbe-smgd of Juniper Networks Junos OS allows an unauthenticated, adjacent attacker to cause a Denial of Service (DoS). In a Broadband Edge / Subscriber Management scenario on MX Series when a specifically malformed ICMP packet addressed to the device is received from a subscriber the bbe-smgd will crash, affecting the subscriber sessions that are connecting, updating, or terminating. Continued receipt of such packets will lead to a sustained DoS condition. When this issue happens the below log can be seen if the traceoptions for the processes smg-service are enabled: BBE_TRACE(TRACE_LEVEL_INFO, "%s: Dropped unsupported ICMP PKT ... This issue affects Juniper Networks Junos OS on MX Series: All versions prior to 19.4R3-S11; 20.2 versions prior to 20.2R3-S7; 20.3 versions prior to 20.3R3-S6; 20.4 versions prior to 20.4R3-S6; 21.1 versions prior to 21.1R3-S4; 21.2 versions prior to 21.2R3-S4; 21.3 versions prior to 21.3R3-S3; 21.4 versions prior to 21.4R3-S2; 22.1 versions prior to 22.1R2-S2, 22.1R3; 22.2 versions prior to 22.2R2; 22.3 versions prior to 22.3R1-S2, 22.3R2. |
| Improper Neutralization of Special Elements used in an OS Command ('OS Command Injection') vulnerability in Brivo ACS100, ACS300 allows OS Command Injection, Bypassing Physical Security.This issue affects ACS100 (Network Adjacent Access), ACS300 (Physical Access): from 5.2.4 before 6.2.4.3.
|
| com.yetanalytics/lrs is the Yet Analytics Core LRS Library. Prior to version 1.2.17 of the LRS library and version 0.7.5 of SQL LRS, a maliciously crafted xAPI statement could be used to perform script or other tag injection in the LRS Statement Browser. The problem is patched in version 1.2.17 of the LRS library and version 0.7.5 of SQL LRS. No known workarounds exist. |
