| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Sme.UP ERP TOKYO V6R1M220406 was discovered to contain an OS command injection vulnerability via calls made to the XMService component. |
| The GS Insever Portfolio WordPress plugin before 1.4.5 does not validate and escape some of its shortcode attributes before outputting them back in a page/post where the shortcode is embed, which could allow users with the contributor role and above to perform Stored Cross-Site Scripting attacks. |
| ViewVC, a browser interface for CVS and Subversion version control repositories, as a cross-site scripting vulnerability that affects versions prior to 1.2.2 and 1.1.29. The impact of this vulnerability is mitigated by the need for an attacker to have commit privileges to a Subversion repository exposed by an otherwise trusted ViewVC instance. The attack vector involves files with unsafe names (names that, when embedded into an HTML stream, would cause the browser to run unwanted code), which themselves can be challenging to create. Users should update to at least version 1.2.2 (if they are using a 1.2.x version of ViewVC) or 1.1.29 (if they are using a 1.1.x version).
ViewVC 1.0.x is no longer supported, so users of that release lineage should implement a workaround. Users can edit their ViewVC EZT view templates to manually HTML-escape changed paths during rendering. Locate in your template set's `revision.ezt` file references to those changed paths, and wrap them with `[format "html"]` and `[end]`. For most users, that means that references to `[changes.path]` will become `[format "html"][changes.path][end]`. (This workaround should be reverted after upgrading to a patched version of ViewVC, else changed path names will be doubly escaped.) |
| The `sanitize-svg` package, a small SVG sanitizer to prevent cross-site scripting attacks, uses a deny-list-pattern to sanitize SVGs to prevent XSS. In doing so, literal `<script>`-tags and on-event handlers were detected in versions prior to 0.4.0. As a result, downstream software that relies on `sanitize-svg` and expects resulting SVGs to be safe, may be vulnerable to cross-site scripting. This vulnerability was addressed in v0.4.0. There are no known workarounds
|
| KubePi is a k8s panel. The jwt authentication function of KubePi through version 1.6.2 uses hard-coded Jwtsigkeys, resulting in the same Jwtsigkeys for all online projects. This means that an attacker can forge any jwt token to take over the administrator account of any online project. Furthermore, they may use the administrator to take over the k8s cluster of the target enterprise. `session.go`, the use of hard-coded JwtSigKey, allows an attacker to use this value to forge jwt tokens arbitrarily. The JwtSigKey is confidential and should not be hard-coded in the code. The vulnerability has been fixed in 1.6.3. In the patch, JWT key is specified in app.yml. If the user leaves it blank, a random key will be used. There are no workarounds aside from upgrading. |
| ViewVC is a browser interface for CVS and Subversion version control repositories. Versions prior to 1.2.3 and 1.1.30 are vulnerable to cross-site scripting. The impact of this vulnerability is mitigated by the need for an attacker to have commit privileges to a Subversion repository exposed by an otherwise trusted ViewVC instance. The attack vector involves files with unsafe names (names that, when embedded into an HTML stream, would cause the browser to run unwanted code), which themselves can be challenging to create. Users should update to at least version 1.2.3 (if they are using a 1.2.x version of ViewVC) or 1.1.30 (if they are using a 1.1.x version).
ViewVC 1.0.x is no longer supported, so users of that release lineage should implement one of the following workarounds. Users can edit their ViewVC EZT view templates to manually HTML-escape changed path "copyfrom paths" during rendering. Locate in your template set's `revision.ezt` file references to those changed paths, and wrap them with `[format "html"]` and `[end]`. For most users, that means that references to `[changes.copy_path]` will become `[format "html"][changes.copy_path][end]`. (This workaround should be reverted after upgrading to a patched version of ViewVC, else "copyfrom path" names will be doubly escaped.)
|
| Discourse Mermaid (discourse-mermaid-theme-component) allows users of Discourse, open-source forum software, to create graphs using the Mermaid syntax. Users of discourse-mermaid-theme-component version 1.0.0 who can create posts are able to inject arbitrary HTML on that post. The issue has been fixed on the `main` branch of the GitHub repository, with 1.1.0 named as a patched version. Admins can update the theme component through the admin UI. As a workaround, admins can temporarily disable discourse-mermaid-theme-component. |
| The Nuxeo Platform is an open source content management platform for building business applications. In version 11.5.109, the `oauth2` REST API is vulnerable to Reflected Cross-Site Scripting (XSS). This XSS can be escalated to Remote Code Execution (RCE) by levering the automation API. |
| Discourse is an option source discussion platform. Prior to version 2.8.14 on the `stable` branch and version 3.0.0.beta16 on the `beta` and `tests-passed` branches, pending post titles can be used for cross-site scripting attacks. Pending posts can be created by unprivileged users when a category has the "require moderator approval of all new topics" setting set. This vulnerability can lead to a full XSS on sites which have modified or disabled Discourse’s default Content Security Policy. A patch is available in versions 2.8.14 and 3.0.0.beta16. |
| Discourse is an option source discussion platform. Prior to version 2.8.14 on the `stable` branch and version 3.0.0.beta16 on the `beta` and `tests-passed` branches, tag descriptions, which can be updated by moderators, can be used for cross-site scripting attacks. This vulnerability can lead to a full XSS on sites which have modified or disabled Discourse’s default Content Security Policy. Versions 2.8.14 and 3.0.0.beta16 contain a patch. |
| Canarytokens is an open source tool which helps track activity and actions on your network. A Cross-Site Scripting vulnerability was identified in the history page of triggered Canarytokens prior to sha-fb61290. An attacker who discovers an HTTP-based Canarytoken (a URL) can use this to execute Javascript in the Canarytoken's trigger history page (domain: canarytokens.org) when the history page is later visited by the Canarytoken's creator.
This vulnerability could be used to disable or delete the affected Canarytoken, or view its activation history. It might also be used as a stepping stone towards revealing more information about the Canarytoken's creator to the attacker. For example, an attacker could recover the email address tied to the Canarytoken, or place Javascript on the history page that redirect the creator towards an attacker-controlled Canarytoken to show the creator's network location.
This vulnerability is similar to CVE-2022-31113, but affected parameters reported differently from the Canarytoken trigger request. An attacker could only act on the discovered Canarytoken. This issue did not expose other Canarytokens or other Canarytoken creators. Canarytokens Docker images sha-fb61290 and later contain a patch for this issue. |
| Izanami is a shared configuration service well-suited for micro-service architecture implementation. Attackers can bypass the authentication in this application when deployed using the official Docker image. Because a hard coded secret is used to sign the authentication token (JWT), an attacker could compromise another instance of Izanami. This issue has been patched in version 1.11.0.
|
| Netdata is an open source option for real-time infrastructure monitoring and troubleshooting. An attacker with the ability to establish a streaming connection can execute arbitrary commands on the targeted Netdata agent. When an alert is triggered, the function `health_alarm_execute` is called. This function performs different checks and then enqueues a command by calling `spawn_enq_cmd`. This command is populated with several arguments that are not sanitized. One of them is the `registry_hostname` of the node for which the alert is raised. By providing a specially crafted `registry_hostname` as part of the health data that is streamed to a Netdata (parent) agent, an attacker can execute arbitrary commands at the remote host as a side-effect of the raised alert. Note that the commands are executed as the user running the Netdata Agent. This user is usually named `netdata`. The ability to run arbitrary commands may allow an attacker to escalate privileges by escalating other vulnerabilities in the system, as that user. The problem has been fixed in: Netdata agent v1.37 (stable) and Netdata agent v1.36.0-409 (nightly). As a workaround, streaming is not enabled by default. If you have previously enabled this, it can be disabled. Limiting access to the port on the recipient Agent to trusted child connections may mitigate the impact of this vulnerability. |
| Sofia-SIP is an open-source SIP User-Agent library, compliant with the IETF RFC3261 specification. In affected versions Sofia-SIP **lacks both message length and attributes length checks** when it handles STUN packets, leading to controllable heap-over-flow. For example, in stun_parse_attribute(), after we get the attribute's type and length value, the length will be used directly to copy from the heap, regardless of the message's left size. Since network users control the overflowed length, and the data is written to heap chunks later, attackers may achieve remote code execution by heap grooming or other exploitation methods. The bug was introduced 16 years ago in sofia-sip 1.12.4 (plus some patches through 12/21/2006) to in tree libs with git-svn-id: http://svn.freeswitch.org/svn/freeswitch/trunk@3774 d0543943-73ff-0310-b7d9-9358b9ac24b2. Users are advised to upgrade. There are no known workarounds for this vulnerability. |
| GLPI is a Free Asset and IT Management Software package. Versions prior to 9.5.12 and 10.0.6 are vulnerable to Improper Privilege Management. Any user having access to the standard interface can export data of almost any GLPI item type, even those on which user is not allowed to access (including assets, tickets, users, ...). This issue is patched in 10.0.6. |
| GLPI is a Free Asset and IT Management Software package. Versions 0.6.0 and above, prior to 10.0.6 are vulnerable to Cross-site Scripting. This vulnerability allow for an administrator to create a malicious external link. This issue is patched in 10.0.6. |
| GLPI is a Free Asset and IT Management Software package. Versions prior to 10.0.6 are subject to Cross-site Scripting via malicious RSS feeds. An Administrator can import a malicious RSS feed that contains Cross Site Scripting (XSS) payloads inside RSS links. Victims who wish to visit an RSS content and click on the link will execute the Javascript. This issue is patched in 10.0.6.
|
| GLPI is a Free Asset and IT Management Software package. Versions 9.4.0 and above, prior to 10.0.6 are subject to Cross-site Scripting. An attacker can persuade a victim into opening a URL containing a payload exploiting this vulnerability. After exploited, the attacker can make actions as the victim or exfiltrate session cookies. This issue is patched in version 10.0.6. |
| GLPI is a Free Asset and IT Management Software package. Versions 10.0.0 and above, prior to 10.0.6, are subject to Cross-site Scripting. An administrator may store malicious code in help links. This issue is patched in 10.0.6. |
| Discourse is an open source platform for community discussion. Versions prior to 2.8.13 (stable), 3.0.0.beta16 (beta) and 3.0.0beta16 (tests-passed), are vulnerable to cross-site Scripting. A maliciously crafted URL can be included in a post to carry out cross-site scripting attacks on sites with disabled or overly permissive CSP (Content Security Policy). Discourse's default CSP prevents this vulnerability. This vulnerability is patched in versions 2.8.13 (stable), 3.0.0.beta16 (beta) and 3.0.0beta16 (tests-passed). As a workaround, enable and/or restore your site's CSP to the default one provided with Discourse. |
