| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Fix dev use-after-free in xfrm async resumption
xfrm async resumption hold skb->dev refcnt until after transport_finish.
However, xfrm_rcv_cb may modify skb->dev to tunnel dev without taking
device reference, such as vti_rcv_cb. The subsequent async resumption
will decrement the tunnel device's reference count, which lead to uaf
of tunnel dev and refcnt leak of orig dev as below:
unregister_netdevice: waiting for vti1 to become free. Usage count = -2
Stash the original skb->dev to fix refcnt imbalance. The new skb->dev set
by xfrm_rcv_cb can race with device teardown. Extend rcu protection over
xfrm_rcv_cb and transport_finish to prevent races. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Sanitize the reply credit grant after parsing
The out_norqst exit in rpcrdma_reply_handler() branches away before
the credit clamp, so a reply that matches no pending request reaches
out_post carrying the raw credit value parsed from the wire.
rpcrdma_post_recvs() does not bound its @needed argument: the refill
loop allocates and chains Receive WRs until the count is satisfied or
allocation fails. A peer that sends a well-formed reply carrying an
unknown XID and an inflated credit grant therefore drives rep
allocation and Receive posting past re_max_requests on every such
reply.
Move the clamp to immediately after the credit field is parsed,
ahead of the first branch that can reach out_post, so every later
consumer sees a sanitized value. The cwnd update stays on the
matched-request path. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Decouple req recycling from RPC completion
rl_kref formerly served two distinct lifetimes through a single
refcount: it gated when a Reply could wake its RPC task, and it
gated when an rpcrdma_req could return to its free pool. The
marshal path took the Send-side reference only when SGEs needed
DMA-unmap (sc_unmap_count > 0), which made a Send carrying only
pre-registered buffers an exception: the Reply handler dropped
rl_kref from 1 to 0 and freed the req while the HCA might still
be DMA-reading from its send buffer.
Give rl_kref a narrower job. The RPC layer takes one reference
when slot allocation hands a req out. rpcrdma_prepare_send_sges()
takes a Send-side reference unconditionally after WR preparation
succeeds. xprt_rdma_free_slot() and xprt_rdma_bc_free_rqst() drop
the RPC-layer reference; rpcrdma_sendctx_unmap() drops the
Send-side reference. The req returns to its free pool only after
both owners have signed off.
The existing kref_init(&req->rl_kref) call in
rpcrdma_prepare_send_sges() is removed. Initialization moves to
the slot-allocation paths (xprt_rdma_alloc_slot and
rpcrdma_bc_rqst_get), and the release callback re-arms rl_kref
before the req returns to a free pool. A re-init in the marshal
path would discard the RPC-layer reference that already exists
on entry.
Three invariants follow:
- Any rpcrdma_req held by an rpc_rqst has rl_kref >= 1.
xprt_rdma_alloc_slot(), rpcrdma_bc_rqst_get(), and the
backlog-wake branch in xprt_rdma_alloc_slot() each kref_init
rl_kref before publishing the req. Without this invariant,
an RPC task that aborts between slot allocation and marshal
(gss_refresh failure or signal during call_connect, for
example) would drive xprt_release() ->
xprt_rdma_free_slot() -> kref_put against a refcount of
zero, saturating refcount_t and stranding the slot.
- The Send-side reference is taken only after WR prep
succeeds. A mapping failure in rpcrdma_prepare_send_sges()
runs rpcrdma_sendctx_cancel(), which DMA-unmaps the sendctx
and clears sc_req without touching rl_kref. The sendctx
ring walks in rpcrdma_sendctx_put_locked() and
rpcrdma_sendctxs_destroy() skip entries with sc_req == NULL,
so a burst of -EIO marshal failures cannot hold reqs off
rb_send_bufs.
- The release callback re-arms rl_kref so the next consumer
enters with the invariant satisfied.
Replies now complete the RPC directly. rpcrdma_reply_handler()
calls rpcrdma_complete_rqst() in place of kref_put on the
non-LocalInv branch. The LocalInv branch already completes the
RPC from frwr_unmap_async() and is unaffected.
Because Send-side references can now outlive RPC completion,
connection teardown drains sendctx entries whose unsignaled
Sends never had a later signaled completion to walk the ring.
rpcrdma_sendctxs_destroy() walks the active range and runs
rpcrdma_sendctx_unmap() on each entry with a non-NULL sc_req
before the request buffers are reset, and is moved ahead of
rpcrdma_reqs_reset() in rpcrdma_xprt_disconnect() so the reqs
are still in their pre-reset state when the Send-side refs are
released.
The drain creates a teardown-ordering hazard on the backchannel
path. With the new lifetime, releasing a bc_prealloc req from
rpcrdma_req_release() re-adds it to bc_pa_list. The disconnect
in xprt_rdma_destroy() runs after xprt_destroy_backchannel() has
already emptied bc_pa_list, so the drained reqs would otherwise
leak. xprt_rdma_destroy() now runs xprt_rdma_bc_destroy(xprt, 0)
a second time after the disconnect to reclaim them. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: call _ntfs_bad_inode() when failing to rename
It is safe to call _ntfs_bad_inode on live inodes since:
commit 519b078998ce ("fs/ntfs3: Exclude call make_bad_inode for live nodes.")
The WARN_ON was added when it wasn't safe by:
commit d99208b91933 ("fs/ntfs3: cancle set bad inode after removing name fails")
Replace the WARN_ON with a call to _ntfs_bad_inode() to prevent further
operations on the inconsistent inode. |
| sqlparse is a non-validating SQL parser module for Python. Prior to 0.6.0, sqlparse/filters/output.py fails to escape existing backslashes before quotes in sqlparse.format output_format='python' and output_format='php' and the corresponding sqlformat -l modes, allowing crafted SQL to terminate the generated string and inject Python or PHP code when a downstream consumer executes or imports the generated source. This issue is fixed in version 0.6.0. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to access server resources with the privileges of an authenticated user due to improper authentication during NTLM session negotiation. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to obtain unauthorized access to files due to a time-of-check time-of-use (TOCTOU) race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: release local_lock before re-enabling softirqs
Quoting sashiko:
In the error path, local_bh_enable() is called before
local_unlock_nested_bh(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Handle unmap error when iommu_debug is enabled
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map. |
| The Smash Balloon Social Post Feed – Simple Social Feeds for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'id' Shortcode Attribute in all versions up to, and including, 4.9.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Store the return value in the appropriate type and in case of error,
return it rather than WARNing.
Patchwork: https://patchwork.freedesktop.org/patch/719685/ |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. |
| Path Traversal in Gateway in Mirasys DVMS Workstation 5.12.6 and earlier allows an attacker to traverse the file system to access files or directories via the Web Client webserver. |
| The ShortPixel Adaptive Images – WebP, AVIF, CDN, Image Optimization plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.11.5. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify configuration options of third-party plugins including ShortPixel Image Optimizer, Autoptimize, WP Rocket, Imagify, and LiteSpeed Cache, as well as the plugin's own API key and account binding. Exploitation requires the respective third-party plugins to be installed, as the impact against those plugins' settings is only reachable when those plugins are present. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to an out-of-bounds read. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to an untrusted search path. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
kernel BUG at arch/x86/kvm/lapic.c:3338!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0xb40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]--- |
