Export limit exceeded: 370345 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (22395 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72043 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: LoongArch: Fix missing dirty page tracking in {pte,pmd}_wrprotect() When hardware page table walker (PTW) is enabled on LoongArch, the CPU may set _PAGE_DIRTY directly in the page table entry during a write TLB miss, without going through the software TLB store handler. The software TLB store handler (tlbex.S:254) sets both _PAGE_DIRTY and_PAGE_MODIFIED together: ori t0, t0, (_PAGE_VALID | _PAGE_DIRTY | _PAGE_MODIFIED) Since hardware PTW only sets _PAGE_DIRTY, the software-only bit, i.e. _PAGE_MODIFIED is left unchanged. This creates a window where a PTE has _PAGE_DIRTY set (hardware knows the page is dirty) but _PAGE_MODIFIED clear (software is unaware). When fork()/clone() triggers copy-on-write, __copy_present_ptes() calls pte_wrprotect(), which unconditionally clears both the _PAGE_WRITE and _PAGE_DIRTY bits: pte_val(pte) &= ~(_PAGE_WRITE | _PAGE_DIRTY); Since _PAGE_MODIFIED was never set, the dirtiness information is lost completely. Subsequently, when memory pressure triggers page reclaim, page_mkclean() / try_to_unmap() sees the page as clean (i.e. pte_dirty() returns false) and the page may be freed without writeback, causing data corruption. Fix this by propagating the _PAGE_DIRTY bit to the _PAGE_MODIFIED bit in both pte_wrprotect() and pmd_wrprotect() before clearing writeable bits: if (pte_val(pte) & _PAGE_DIRTY) pte_val(pte) |= _PAGE_MODIFIED; The pmd_wrprotect() fix handles the CONFIG_TRANSPARENT_HUGEPAGE case, where pmd entries need the same treatment. This ensures the software dirty tracking bit (checked by pte_dirty() and pmd_dirty(), which read both the _PAGE_DIRTY and _PAGE_MODIFIED bits) is preserved across fork COW write-protection. The issue was found by the LTP madvise09 test case, which exercises page reclaim after "madvise(MADV_FREE), write and fork" operation sequence on private anonymous mappings. | ||||
| CVE-2026-72046 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: gve: fix header buffer corruption with header-split and HW-GRO The DQO RX datapath programs a per-buffer-queue-descriptor header_buf_addr at post time and reads the split header back at completion time. Both the post and the read currently index the header buffer by queue position rather than by the buffer's identity: - post (gve_rx_post_buffers_dqo): header_buf_addr is computed from bufq->tail - read (gve_rx_dqo): the header is read from desc_idx (the completion queue head index) This relies on the buffer-queue index and the completion-queue index being equal for the start of every packet, i.e. on the device consuming posted buffers and returning completions in the exact same order. That assumption does not hold once HW-GRO is enabled with multiple flows: coalesced segments are accepted and completed in an order that may differ from the order buffers were posted, and segments from different flows may interleave. That results in two problems: 1. Wrong header slot on read. Because the read offset is derived from the completion index (desc_idx) while the device wrote the header to the address programmed for the buffer's buf_id, the driver can copy a header belonging to a different packet. This shows up as throughput drop (about 30% drop and large numbers of TCP retransmissions) with header-split and HW-GRO both enabled and many streams. 2. Header buffer reused while still owned by the device. The driver advances bufq->head by one per completion and re-posts buffers based on that. Arrival of N RX completions only guarantees that at least N RX buffer descriptors have been read by the device. It does not guarantee that the device has relinquished the ownership of all the buffers corresponding to those N descriptors. With out-of-order completions (e.g. the completion for a packet copied into buffer N arrives before the completion for a packet copied into buffer N-1), the driver can re-post and overwrite a header buffer that the device is still going to write into, corrupting the header of a packet whose completion has not yet been processed. Fix both issues by indexing the header buffer by buf_id on both the post and read paths. Reading from buf_id's slot is therefore always correct regardless of completion ordering (fixes problem 1). Indexing by buf_id also ties each header slot to the lifetime of its buffer state. A buffer state is only returned to the free/recycle lists when its own completion (buf_id) is processed, so its header slot can only be re-posted after the device is done with it. This makes header slot reuse safe under out-of-order completions (fixes problem 2). Allocate (gve_rx_alloc_hdr_bufs) and free (gve_rx_free_hdr_bufs) the header buffers based on num_buf_states to match the buf_id indexing. | ||||
| CVE-2026-68462 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Reject negative const offsets for buffer pointers The verifier rejects variable offsets for PTR_TO_TP_BUFFER and PTR_TO_BUF accesses, but it currently accepts a constant negative offset produced by pointer arithmetic. Commit 022ac0750883 ("bpf: use reg->var_off instead of reg->off for pointers") moved constant pointer offsets from reg->off to reg->var_off. However, __check_buffer_access() continued to check only the instruction offset. An access with reg->var_off equal to -8 and an instruction offset of zero therefore passes verification. For writable raw tracepoints, the access end is also calculated from the unsigned reg->var_off.value. An eight-byte access starting at -8 wraps the calculated end to zero, allowing the program to load and attach without increasing max_tp_access. After ensuring that reg->var_off is constant, calculate the effective access start using signed arithmetic and reject it when it is negative. Use the validated start to calculate the access end for both PTR_TO_TP_BUFFER and PTR_TO_BUF. | ||||
| CVE-2026-68466 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mtd: rawnand: lpc32xx_slc: fail DMA transfer on completion timeout lpc32xx_xmit_dma() waits for the DMA completion callback but ignores wait_for_completion_timeout(). A timed out DMA transfer is therefore unmapped and reported as successful to the NAND read/write path. Return -ETIMEDOUT when the completion wait expires. Terminate the DMA channel before unmapping the scatterlist so the timed out transfer cannot continue to access the buffer after the error is returned. | ||||
| CVE-2026-74555 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock: the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue, calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI devices and waits for the host to become runtime-active. But the host cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the drain is blocked on that very handler. However skipping the drain reintroduces a race: hisi_sas returns from resume before all PHY UP work and libsas discovery work finish. The controller may then autosuspend while disks are still waking up. The disks issue IO to a suspended controller, the IO fails, and the disks get disabled. Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT notification to after sas_drain_work(). By then the host resume is about to complete, so device removal through device_link no longer blocks on the resume and the cycle is broken. With the deadlock gone, restore sas_resume_ha() (the draining variant) in hisi_sas and remove sas_resume_ha_no_sync(). The reorder is safe for the other libsas consumers (isci, pm8001, aic94xx, mvsas). During suspend, sas_suspend_devices() calls sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a timed-out phy's disk is immediately rejected by the LLDD before reaching hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET), and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both complete directly via scsi_done() without entering SCSI EH. This is identical in both the old and new ordering since lldd_dev_gone runs during suspend, before resume. The reorder only affects when the PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work() vs. asynchronous after resume returns), not whether I/O can reach the device. aic94xx and mvsas do not register any PM ops and never reach this code path. | ||||
| CVE-2026-74500 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix stack info leak in RME Digiface status snd_rme_digiface_read_status() reads a four-word status block from the device into an uninitialised on-stack __le32 buf[4] and, whenever the vendor control-IN transfer does not return a negative error, copies all four words into the caller's status[]. snd_usb_ctl_msg() copies the full requested size back into the caller's buffer regardless of how many bytes the data stage actually delivered: buf = kmemdup(data, size, GFP_KERNEL); err = usb_control_msg(dev, pipe, request, requesttype, value, index, buf, size, timeout); memcpy(data, buf, size); usb_control_msg() returns the transferred length on a short control-IN, which is a non-negative value, and writes only that many bytes. The remainder of the copy back is the kmemdup()ed image of the caller's buffer, so a device answering with a short data stage leaves the trailing words of buf[] holding leftover kernel stack. The only guard in the caller is err < 0, so those words are stored into status[]. They then reach user space: snd_rme_digiface_get_status_val() selects a 16-bit halfword of status[] per the control's reg/mask, and the eight Digiface status controls together expose the whole 16-byte frame to an unprivileged reader of /dev/snd/controlC*. Zero-initialise the buffer so a short read yields zeros instead of stack residue. This mirrors snd_rme_get_status1(), which already clears its output word before the same kind of vendor read. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74499 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.0 High |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: fix OOB write in snd_usbmidi_akai_output() snd_usbmidi_akai_output() computes its fill-loop bound buf_end = ep->max_transfer - MAX_AKAI_SYSEX_LEN - 1; as a signed int, so a small device-advertised bulk-OUT max_transfer makes buf_end negative. The loop guard then compares the u32 urb->transfer_buffer_length against that negative int: the usual arithmetic conversion turns buf_end into a large unsigned value, so the guard stays true and each iteration keeps appending SysEx framing and payload bytes past the end of the URB transfer buffer, which is only max_transfer bytes long. A USB device that advertises a tiny bulk-OUT endpoint can therefore trigger an attacker-length- and content-controlled heap out-of-bounds write when a process writes to the created /dev/snd/midiC*D* node. Return early when there is no room for even one SysEx, so the loop is never entered with a bound that would wrap. The loop is the last statement of the function, so bailing out is equivalent to it not running. Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> | ||||
| CVE-2026-74494 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: reject repeated SMB2 NEGOTIATE requests Unauthenticated client can send multiple successful SMB2 NEGOTIATE requests on one connection before SESSION_SETUP. While the connection is in KSMBD_SESS_NEED_SETUP, smb2_handle_negotiate() accepts another SMB3.1.1 NEGOTIATE and overwrites conn->preauth_info with a new allocation. Only the final allocation is freed when the connection is released, leaking one object for every additional successful request. A repeated SMB2 NEGOTIATE after a dialect has been selected is a protocol violation. MS-SMB2 section 3.3.5.4 requires the server to disconnect without replying in this case. Set the connection exiting when rejecting the request, in addition to suppressing the response. Reject SMB2 NEGOTIATE unless the connection is new or is waiting for the SMB2 NEGOTIATE that follows an SMB1 multi-protocol negotiate. Serialize both SMB1 and SMB2 negotiation paths under conn->srv_mutex, since they update connection-wide dialect and negotiation state. Move the locking contract to ksmbd_smb_negotiate_common(), where the state and dialect are selected, and add ksmbd_conn_new() for consistent state access. | ||||
| CVE-2026-74491 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: of/address: Fix NULL bus dereference in of_pci_range_parser_one() The bus matching rework made of_match_bus() return NULL for nodes with ranges/dma-ranges but no local #address-cells. parser_init() stored that NULL bus, and the range iterator later dereferenced it. Reject such nodes in parser_init(), leaving an explicit empty iterator for callers that ignore the init return, and make of_dma_get_max_cpu_address() honour the init failure so a rejected node cannot clamp the DMA limit. | ||||
| CVE-2026-74464 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: openvswitch: fix skb leak on flow key update failure during ct ovs_ct_execute() always steals or frees the skb on failure while ovs_flow_key_update() does not. So, if it fails and we return right away, the skb ends up leaked. Fix that by breaking instead and letting the common error handling code at the bottom of the loop to free the skb properly. This is a very unlikely scenario as it requires the packet to become unparseable by applying a set of actions on a previously parseable skb, but should be fixed nevertheless. Reported by Sashiko. | ||||
| CVE-2026-74448 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: fix QID bit leak in pqm_create_queue() When MES is enabled and amdgpu_amdkfd_alloc_kernel_mem() fails during the first queue creation for a process, pqm_create_queue() returns early via 'return retval' without going through the err_create_queue cleanup label. This means clear_bit(*qid, pqm->queue_slot_bitmap) is never called, leaving the reserved QID bit permanently set in queue_slot_bitmap. Over time this leaks QID slots, potentially exhausting all available queue slots. Fix this by replacing 'return retval' with 'goto err_allocate_pqn' so that clear_bit() is always called on the error path without touching the uninitialized pqn pointer. AILIKFD-813 (cherry picked from commit a107f74c38edbb80d6ab64dcaeeb292c14e9779f) | ||||
| CVE-2026-74445 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: reject DX_BIND_QUERY without a DX context vmw_cmd_dx_bind_query() unconditionally dereferences sw_context->dx_ctx_node->ctx. Userspace can trigger a NULL pointer dereference from any render-node fd by submitting an execbuf with dx_context_handle == SVGA3D_INVALID_ID and a SVGA_3D_CMD_DX_BIND_QUERY opcode in the command stream: dx_ctx_node is left NULL and the kernel oopses on the assignment. The same NULL is then re-read in vmw_resources_reserve() via vmw_context_get_dx_query_mob(). All sibling DX handlers fail-close on a missing dx_ctx_node using VMW_GET_CTX_NODE(). Use the same pattern here, returning -EINVAL up front before any relocation state is published. | ||||
| CVE-2026-74442 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: avoid destroy_workqueue(NULL) on vkms init failure Two paths through vmw_vkms_init() can leave vmw->crc_workq NULL while still leaving the rest of the driver in a state that calls vmw_vkms_cleanup() at module unload: 1. vmw_host_get_guestinfo(GUESTINFO_VBLANK, ...) failing or returning an oversized buffer -- the common case on hosts without a VBLANK guestinfo entry -- early-returned before the workqueue allocation. 2. alloc_ordered_workqueue() returning NULL on memory pressure. vmw_vkms_cleanup() then calls destroy_workqueue(NULL), which dereferences wq->name and panics. Fix the first case by removing the early return: vmw->vkms_enabled is already false on the rpci-failure path so no work will ever be queued, and allocating the workqueue unconditionally keeps the control flow simple. Fix the second case by guarding the cleanup with a NULL check, since alloc_ordered_workqueue() can still fail under low memory. | ||||
| CVE-2026-72490 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt The null-pointer-guard was incorrect, returning _FAIL on valid pointer. Invert the guard, so it returns _FAIL on invalid pointer. | ||||
| CVE-2026-72486 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mailbox: mtk-adsp: fix UAF during device teardown When the SOF audio driver fails to initialize (e.g. firmware boot timeout), its devres unwind frees the snd_sof_dev object that the mailbox client (mtk-adsp-ipc) reaches via chan->cl->rx_callback. The mtk-adsp-mailbox shutdown clears the mailbox command registers but leaves the IRQ line unmasked, so a late interrupt can still queue a threaded handler after mbox_free_channel() had cleared chan->cl, and mbox_chan_received_data() would then trigger UAF: BUG: KASAN: slab-use-after-free in sof_ipc3_validate_fw_version sof_ipc3_validate_fw_version sof_ipc3_do_rx_work sof_ipc3_rx_msg mt8196_dsp_handle_request mtk_adsp_ipc_recv mbox_chan_received_data mtk_adsp_mbox_isr irq_thread_fn Freed by task ...: kfree devres_release_all really_probe ... (sof-audio-of-mt8196 probe failure) The crash was observed roughly three seconds after the failed probe. disable_irq() in shutdown and enable_irq() in startup. disable_irq() also waits for any in-flight interrupts, so by the time mbox_free_channel() proceeds to clear chan->cl no rx_callback can run. In addition, request the IRQ with IRQF_NO_AUTOEN so it stays masked between probe and the first client bind — otherwise an early interrupt can crash on chan->cl == NULL in mbox_chan_received_data(). | ||||
| CVE-2026-72458 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: apparmor: fix NULL pointer dereference in unpack_pdb pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer dereference. | ||||
| CVE-2026-72445 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: usb-audio: qcom: clear opened when stream enable fails On enable, subs->opened is set before the service_interval is validated; an invalid interval jumps to the response label without clearing it, so the substream is wedged at -EBUSY until a disable or disconnect. Clear subs->opened on the enable error path. | ||||
| CVE-2026-72430 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net/sched: act_ct: fix nf_connlabels leak on two error paths tcf_ct_fill_params() calls nf_connlabels_get() (setting put_labels) when TCA_CT_LABELS is present, but two later error sites use a bare return instead of "goto err", skipping the err: nf_connlabels_put() cleanup. They also precede the "p->put_labels = put_labels" assignment, so the tcf_ct_params_free() fallback does not release the count either. Each failed RTM_NEWACTION on these paths leaks one nf_connlabels reference: net->ct.labels_used is incremented and never released. The action is reachable with CAP_NET_ADMIN over the netns, i.e. from an unprivileged user namespace on default-userns kernels. Impact: an unprivileged user with CAP_NET_ADMIN over a network namespace (e.g. via user namespaces) leaks one nf_connlabels reference per failed RTM_NEWACTION on the two error paths; net->ct.labels_used is never released. The err: label is safe to reach from both sites: p->tmpl is still NULL there (kzalloc'd, not yet assigned) and nf_ct_put(NULL) is a no-op, so no inline release is needed. | ||||
| CVE-2026-72428 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Fix stack slot index in nospec checks check_stack_write_fixed_off() computes the byte slot for a fixed-offset stack write as -off - 1, and records each written byte in slot_type[] with (slot - i) % BPF_REG_SIZE. The Spectre v4 sanitization pre-check uses slot_type[i] instead. For a 4-byte write at fp-8 after the lower half of fp-8 has been zeroed, the pre-check scans bytes 0..3 and sees STACK_ZERO while the actual write updates bytes 7..4. That can leave the second half-slot write without nospec_result even though the bytes being overwritten still require sanitization. Use the same slot index in the sanitization pre-check that the write path uses when updating slot_type[]. | ||||
| CVE-2026-72403 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ALSA: FCP: Fix NULL pointer dereference in interface lookup A malformed USB device can provide a vendor-specific interface without any endpoint descriptors. fcp_find_fc_interface() currently selects the first vendor-specific interface and reads endpoint 0 from it, without checking whether the interface actually has any endpoints. When bNumEndpoints is zero, no endpoint array is allocated for the parsed alternate setting, so get_endpoint(..., 0) yields an invalid endpoint descriptor pointer. Dereferencing it through usb_endpoint_num() then triggers a NULL pointer dereference. Skip vendor-specific interfaces that do not have any endpoints. | ||||