| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: avoid stale FIFO cells during resize
snd_seq_fifo_resize() still needs to publish the replacement pool
before it waits for FIFO users. A blocking snd_seq_read() holds
f->use_lock while it sleeps, so concurrent senders must be able to
queue to the new pool and wake that reader instead of failing against a
closing old pool.
However, snd_seq_fifo_event_in() duplicates an event before it takes
f->lock, and snd_seq_read() can dequeue a cell and later call
snd_seq_fifo_cell_putback() if copy_to_user() or
snd_seq_expand_var_event() fails. If resize swaps f->pool and detaches
oldhead in between, either path can relink an old-pool cell after the
snapshot. That stale cell sits outside the drained oldhead list, keeps
oldpool->counter elevated, and can leave snd_seq_pool_delete() waiting
for the retired pool to drain.
Keep the existing swap-before-wait ordering in snd_seq_fifo_resize(),
but reject stale cells before any FIFO relink. Revalidate event-in cells
under f->lock and retry them against the published replacement pool, and
free stale putback cells instead of linking them back into the FIFO.
The buggy scenario involves two paths, with each column showing the
order within that path:
resize path: relink path:
1. Allocate newpool. 1. Take f->use_lock.
2. Swap f->pool to newpool and 2. Duplicate or dequeue an old-pool
detach oldhead. cell before oldpool closes.
3. Mark oldpool closing and 3. Reach a later relink point after
wait for FIFO users. resize published newpool.
4. Free oldhead and delete 4. Relink the old-pool cell after
oldpool. resize detached oldhead.
5. Drop f->use_lock.
The reproducer reports a resize ioctl blocked in the expected pool
teardown path:
signal: resize iteration=98 target_pool=4 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=651 wchan=snd_seq_pool_done
diagnostic: resize_tid=651 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
A second run with larger pools hit the same target path:
signal: resize iteration=32 target_pool=64 exceeded 250ms
(elapsed=251ms)
diagnostic: resize_tid=663 wchan=snd_seq_pool_done
diagnostic: resize_tid=663 stack=
snd_seq_pool_done+0x5b/0x140
snd_seq_pool_delete+0x7a/0x90
snd_seq_fifo_resize+0x193/0x1e0
snd_seq_ioctl_set_client_pool+0x214/0x260
snd_seq_ioctl+0x119/0x540
__x64_sys_ioctl+0xd1/0x120
do_syscall_64+0xbb/0x2f0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid displaying the kernel pointer
While dumping the info on MR using the rdma tool, we
dump the mr_hwq which is a kernel pointer. There is
no need to expose this value for end user. So avoid
it. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: rtl8723bs: fix stainfo check in rtw_aes_decrypt
The null-pointer-guard was incorrect, returning _FAIL on valid pointer.
Invert the guard, so it returns _FAIL on invalid pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: most: video: avoid double free on video register failure
comp_register_videodev() allocates a video_device with
video_device_alloc() and releases it if video_register_device() fails.
This can double free the video_device when __video_register_device()
reaches device_register() and that call fails:
video_register_device()
-> __video_register_device()
-> device_register() fails
-> put_device(&vdev->dev)
-> v4l2_device_release()
-> vdev->release(vdev)
-> video_device_release(vdev)
comp_register_videodev()
-> video_device_release(mdev->vdev)
Use video_device_release_empty() while registering the device so that
registration failure paths do not free mdev->vdev through vdev->release().
comp_register_videodev() then releases mdev->vdev exactly once on failure.
Restore video_device_release() after successful registration so the
registered device keeps its normal lifetime handling.
This issue was found by a static analysis tool I am developing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: ak8975: fix potential kernel stack memory leak
Currently in the AK8975 driver there are four instances where potential
uninitialized kernel stack memory leaks can occur. If
i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than
the size of the buffer, uninitialized bytes are retained in the buffer
and later the buffer is passed on to IIO buffers, potentially leaking
memory to userspace.
Fix this by adding checks whether the return value of the function is
equal to the size of the buffer and subsequently if the value is
lesser than zero to distinguish from a returned error code. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: mma8452: handle I2C read error(s) in mma8452_read()
Currently, If i2c_smbus_read_i2c_block_data() fails but
mma8452_set_runtime_pm_state() succeeds, mma8452_read() returns 0.
As a result, the caller mma8452_read_raw() assumes the read was
successful and proceeds to use a buffer containing uninitialized
stack memory.
Add proper checking of the I2C read return value and propagate errors
to the caller. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dma-axi-dmac: Properly free struct axi_dmac_desc
Use axi_dmac_free_desc() to free fully the descriptor at fail path when
call axi_dmac_alloc_desc() in axi_dmac_prep_peripheral_dma_vec(). |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: dma-axi-dmac: use DMA pool to manange DMA descriptor
For architectures like Microblaze or arm64 (where this IP is used),
DMA_DIRECT_REMAP is set which means that dma_alloc_coherent() might
remap (and hence vmalloc()) some memory. This became visible in a design
where dma_direct_use_pool() is not possible.
With the above, when calling dma_free_coherent(), vunmap() would be
called from softirq context and thus leading to a BUG().
To fix it, use a dma pool that is allocated in
.device_alloc_chan_resources() and allocate blocks from it. The key
point is that now dma_pool_free() is used in axi_dmac_free_desc() to
free the blocks and that just frees the blocks from the pool in the
sense they can be used again. In other words, no actual call to
dma_free_coherent() happens. That only happens when destroying the pool
in axi_dmac_free_chan_resources() which does not happen in any interrupt
context. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Initialize re_id before removal registration
rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client
before returning the new rdma_cm_id to rpcrdma_ep_create(). However
rpcrdma_ep_create() currently stores that pointer in ep->re_id only
after rpcrdma_create_id() returns.
A local administrator can race an NFS/RDMA mount against RDMA device
removal. If rpcrdma_remove_one() observes the just-registered
notification before rpcrdma_ep_create() assigns ep->re_id,
rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL).
The tracepoint dereferences id->device->name and copies
id->route.addr.dst_addr, so the callback can crash the kernel with a
NULL pointer dereference.
Store the rdma_cm_id in ep->re_id immediately before publishing
ep->re_rn. The existing error path still destroys the id directly if
registration fails; ep is then freed by the caller without using
ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Check frwr_wp_create() during connect
frwr_wp_create() creates the singleton Memory Region used to encode
padding for Write chunks whose payload length is not XDR-aligned. Its
failure paths return a negative errno and leave ep->re_write_pad_mr set
to NULL.
rpcrdma_xprt_connect() currently ignores that return value. If
frwr_wp_create() fails after the rest of the connection setup succeeds,
xprt_rdma_connect_worker() treats the connection attempt as successful
and sets XPRT_CONNECTED. A later NFS/RDMA read with a non-4-byte-aligned
receive page length reaches rpcrdma_encode_write_list(), passes the NULL
write-pad MR to encode_rdma_segment(), and dereferences it.
This is locally triggerable on an NFS/RDMA client after a connect or
reconnect hits a local MR allocation, DMA-map, MR-map, or post-send
failure; a remote peer alone cannot force the local MR setup failure.
Check the return value and fail the connect as -ENOTCONN, matching the
adjacent setup failures. This keeps XPRT_CONNECTED clear and lets the
normal reconnect path retry. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fix NULL pointer dereference in unpack_pdb
pdb->dfa could be NULL if unpack_dfa fails, causing a NULL pointer
dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: fail policy unpack on accept2 allocation failure
unpack_pdb() may need to allocate a missing ACCEPT2 table for older policy
data. If that allocation failed, it set an error message but jumped to the
success path, returning a policydb with the required table missing.
Return -ENOMEM through the normal failure path when the ACCEPT2 allocation
fails. Remove the now-unused out label. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: release exe file resources on path failure
get_current_exe_path() takes both an exe_file reference and a path
reference before resolving the path name. If aa_path_name() failed, it
returned immediately and leaked both references.
Route the failure through the common cleanup path so fput() and path_put()
always run after the references are acquired. |
| In the Linux kernel, the following vulnerability has been resolved:
regcache: Do not overwrite error code when finalizing cache after error
During regcache initialization, if an error occurs in the
cache_ops->populate callback, and if cache operations include an exit
callback, the error code from populate() is overwritten with the return
value from exit(). This hides the error condition from the caller of
regcache_init(), and can cause NULL pointer dereferences when the regcache
is later accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-pf: Fix leak of SQ timestamp buffer on teardown
The send-queue timestamp ring is allocated with qmem_alloc() when
timestamping is used, but otx2_free_sq_res() never freed sq->timestamps,
leaking that memory across ifdown and device removal. Add the missing
qmem_free() alongside the other SQ companion buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: hold socket lock when dumping endpoints in sctp_diag
SCTP_DIAG endpoint dumping was traversing endpoint address lists without
holding lock_sock(), while those lists could change concurrently via
socket operations (e.g., bindx changes). This creates a race where
nla_reserve() counts addresses under RCU protection, but the subsequent
copy may see fewer entries, potentially leaking uninitialized memory to
userspace.
Fix this by:
- Taking a reference on each endpoint during hash traversal
- Moving socket operations (lock_sock()) outside read_lock_bh()
- Serializing address list access during dump
- Reworking sctp_for_each_endpoint() to support restart-based traversal
with (net, pos) tracking
Also:
- Add WARN_ON_ONCE() for inconsistent address counts
- Fix idiag_states filtering for LISTEN vs association cases
- Skip dumping endpoints being freed (ep->base.dead)
- Move dump position tracking into iterator, removing cb->args[4] and
its comment for sctp_ep_dump().,
- Update the comment for cb->args[4] and remove the comment for unused
cb->args[5] for sctp_sock_dump().
Note: traversal is restart-based and may re-scan buckets multiple times,
but this is acceptable due to small bucket sizes and required to support
sleeping-safe callbacks.
This issue was reported by Nico Yip (@_cyeaa_) working with TrendAI Zero
Day Initiative. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: Kill MIDI 2.0 URBs before freeing endpoints
MIDI 2.0 input URBs are started during snd_usb_midi_v2_create(). A
later setup failure can still jump to snd_usb_midi_v2_free(), which
currently frees each endpoint and its coherent URB buffers without first
stopping the submitted URBs. A completion can then dereference the
embedded URB context and endpoint state after they have been freed, or
try to resubmit from the stale endpoint.
This was observed as a KASAN slab-use-after-free in
input_urb_complete().
The buggy scenario involves two paths, with each column showing the order
within that path:
probe error path: USB completion path:
1. start_input_streams() submits 1. The HCD still owns a
input URBs. submitted input URB.
2. A later setup helper returns 2. input_urb_complete() runs
an error. with urb->context in ep.
3. snd_usb_midi_v2_free() frees 3. The completion reads ep
endpoint storage and URB buffers. state and can requeue URBs.
Make the endpoint destructor follow the same teardown ordering used for
disconnect when the endpoint has not already been disconnected: publish
ep->disconnected, kill the URBs synchronously, and drain the endpoint
before freeing URB buffers and endpoint storage. The guard avoids
repeating the stop sequence after the normal
snd_usb_midi_v2_disconnect_all() path, while still synchronizing the
direct MIDI 2.0 create-error free path.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in input_urb_complete+0x37/0x1b0
Workqueue: usb_hub_wq hub_event
RIP: 0010:_raw_spin_unlock_irq+0x2e/0x50
Read of size 8
Call trace:
dump_stack_lvl+0x77/0xb0
print_report+0xce/0x5f0
input_urb_complete+0x37/0x1b0 (sound/usb/midi2.c:186)
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__usb_hcd_giveback_urb+0x112/0x1d0
dummy_timer+0xaaa/0x19a0
lock_is_held_type+0x9a/0x110
__lock_acquire+0x467/0x28b0
mark_held_locks+0x40/0x70
_raw_spin_unlock_irqrestore+0x44/0x60
lockdep_hardirqs_on_prepare+0xbb/0x1a0
__hrtimer_run_queues+0x101/0x520
hrtimer_run_softirq+0xd0/0x130
handle_softirqs+0x15b/0x670
__irq_exit_rcu+0xd0/0x170
irq_exit_rcu+0xe/0x20
sysvec_apic_timer_interrupt+0x6c/0x80
asm_sysvec_apic_timer_interrupt+0x1a/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: fix kernel-infoleak in dgram_recvmsg()
KMSAN reported a kernel-infoleak in move_addr_to_user():
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
include/linux/instrumented.h:131 [inline]
BUG: KMSAN: kernel-infoleak in _inline_copy_to_user
include/linux/uaccess.h:205 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xcc/0x120
lib/usercopy.c:26
instrument_copy_to_user include/linux/instrumented.h:131 [inline]
_inline_copy_to_user include/linux/uaccess.h:205 [inline]
_copy_to_user+0xcc/0x120 lib/usercopy.c:26
copy_to_user include/linux/uaccess.h:236 [inline]
move_addr_to_user+0x2e7/0x440 net/socket.c:302
____sys_recvmsg+0x232/0x610 net/socket.c:2925
...
Uninit was stored to memory at:
ieee802154_addr_to_sa include/net/ieee802154_netdev.h:369 [inline]
dgram_recvmsg+0xa09/0xbe0 net/ieee802154/socket.c:739
The issue occurs because the `pan_id` field of `struct ieee802154_addr`
is left uninitialized when the address mode is `IEEE802154_ADDR_NONE`.
The execution flow is as follows:
1. `__ieee802154_rx_handle_packet()` declares a local `struct
ieee802154_hdr hdr` on the stack.
2. `ieee802154_hdr_pull()` calls `ieee802154_hdr_get_addr()` to parse
the source and destination addresses into this structure.
3. If the address mode is `IEEE802154_ADDR_NONE`,
`ieee802154_hdr_get_addr()` previously only set the `mode` field,
leaving the `pan_id` field containing uninitialized stack memory.
4. This uninitialized `pan_id` is later copied into a `struct
sockaddr_ieee802154` in `dgram_recvmsg()` via `ieee802154_addr_to_sa()`.
5. Finally, `move_addr_to_user()` copies the socket address structure to
user space, leaking the uninitialized bytes.
Fix this by using `memset` to zero out the address structure in
`ieee802154_hdr_get_addr()` when the mode is `IEEE802154_ADDR_NONE`. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix writes_pending leak on write request failures
raid10_make_request() acquires a writes_pending reference with
md_write_start() before dispatching write requests. Several failure
paths in raid10_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid10_write_request() return a status indicating whether the write
request was successfully queued. This allows raid10_make_request() to
release the writes_pending reference with md_write_end() when a write
request fails. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: free r1_bio when REQ_NOWAIT is set and read would block on retry
When a read is retried, raid1_read_request() may be called with a
pre-allocated r1_bio. If wait_read_barrier() fails for a REQ_NOWAIT
read, the bio is completed and the function returns immediately. In this
case the existing r1_bio is leaked.
This fixes a leak of pre-allocated r1_bio structures for retried reads. |
