| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A server-side request forgery (SSRF) vulnerability was found in AWX's webhook status callback mechanism. When processing GitHub pull request webhooks, AWX extracts the status callback URL (pull_request.statuses_url) from the incoming webhook payload without validating the target host against the expected Git provider. This URL is persisted in job extra variables and later used to send authenticated status updates. A user with admin role on a webhook-enabled job template can read the template's webhook signing key, forge a signed GitHub webhook payload with an arbitrary statuses_url, and cause AWX to POST status updates to an attacker-controlled or internal URL. The status update request includes the configured Git Personal Access Token (PAT) in the Authorization header, resulting in credential leakage to the attacker-specified endpoint. |
| A flaw was found in the AAP Controller's HashiCorp Vault credential plugin. The kubernetes_auth() function in awx_plugins/credentials/hashivault.py reads the controller pod's Kubernetes service account token and sends it to an attacker-controlled URL when a HashiCorp Vault Secret Lookup credential with kubernetes_role authentication is tested. An authenticated attacker with credential-creation privileges can exfiltrate the service account token, gaining Kubernetes API access to the control plane namespaces with full pod CRUD and secret read permissions, including database credentials and the Django SECRET_KEY. |
| Incorrect comparison for some Intel(R) TDX Guest software before version 0.3.1 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Incorrect calculation for some Intel(R) TDX Guest software before version 0.3.1 within Ring 3: User Applications may allow an escalation of privilege. System software adversary with a privileged user combined with a low complexity attack may enable escalation of privilege. This result may potentially occur via local access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (low), integrity (low) and availability (low) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (none) impacts. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in wojtekmach Req allows attacker-controlled HTTP servers to exhaust memory in a Req client via decompression-bomb response bodies.
Req's default response pipeline includes Req.Steps.decode_body/1 and Req.Steps.decompress_body/1 in lib/req/steps.ex. decode_body/1 dispatches on the server-supplied content-type (or URL extension) and calls :zip.extract(body, [:memory]) for application/zip, :erl_tar.extract({:binary, body}, [:memory]) for application/x-tar, and :erl_tar.extract({:binary, body}, [:memory, :compressed]) for application/gzip / .tgz. Each returns the full decompressed archive contents as a [{name, bytes}] list in memory, with no per-entry or total size cap. decompress_body/1 walks the content-encoding header and chains :zlib/:brotli/:ezstd decoders, so a response advertising content-encoding: gzip, gzip, gzip inflates through multiple layers without bound.
Both steps are enabled by default, no caller opt-in is required, and the attacker controls the content-type and content-encoding headers on their own server (or on any host reached via Req's automatic redirect following). A sub-megabyte response can expand to multiple gigabytes on the victim, crashing the BEAM process.
This issue affects req: from 0.1.0 before 0.6.1. |
| Microsoft is aware of an elevation of privilege in the Microsoft Malware Protection Engine in Microsoft Defender publicly referred to as "ShieldBreak ".
We are working to provide a high quality security update that addresses this vulnerability. We will provide information in this CVE when the update is available. |
| In the Linux kernel, the following vulnerability has been resolved:
xen/gntdev: fix error handling in ioctl
When gntdev_ioctl_map_grant_ref() fails to copy the operation result
back to userspace after successfully adding the mapping to the list,
the error path returns -EFAULT without releasing the reference
acquired by gntdev_alloc_map(). The mapping remains in priv->maps
with a refcount of 1, causing a memory leak and a dangling list
entry.
Additionally, gntdev_add_map() may modify map->index to avoid overlap
with existing mappings. Therefore, the index returned to userspace
must be obtained after gntdev_add_map() completes.
Fix this by holding the mutex across gntdev_add_map(), retrieving
the correct index, and copy_to_user(). If copy_to_user() fails,
remove the mapping from the list and release the reference while
still holding the lock.
Fix these issues by properly handling all error cases. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: reject dinodes with non-canonical i_mode type
Patch series "ocfs2: harden inode validators against forged metadata", v2.
This series adds three structural checks to OCFS2 dinode validation so
malformed on-disk fields are rejected before ocfs2_populate_inode() copies
them into the in-core inode.
The checks cover:
- i_mode values whose type bits do not name a canonical POSIX file
type;
- non-device dinodes whose id1.dev1.i_rdev field is non-zero; and
- non-inline dinodes that claim non-zero i_size while i_clusters is
zero, covering directories unconditionally and regular files on
non-sparse volumes.
The normal read path reports these through ocfs2_error(), matching the
existing suballoc-slot, inline-data, chain-list, and refcount checks. The
online filecheck path uses the same structural predicates but keeps its
own reporting contract, returning OCFS2_FILECHECK_ERR_INVALIDINO instead
of calling ocfs2_error().
This patch (of 3):
ocfs2_validate_inode_block() currently accepts any non-zero i_mode value.
ocfs2_populate_inode() then copies that mode verbatim into inode->i_mode
and dispatches on i_mode & S_IFMT to the file/dir/symlink/special_file
iops; an unrecognised type falls through to ocfs2_special_file_iops and
init_special_inode().
Reject dinodes whose type bits do not name one of the seven canonical
POSIX file types. Use fs_umode_to_ftype(), the same generic file-type
conversion helper OCFS2 already uses for directory entries, so the
accepted inode type set matches the kernel file-type vocabulary instead of
open-coding a local switch.
Apply the same structural check to the online filecheck read path.
filecheck keeps its own error namespace, so it reports malformed i_mode
through the filecheck logger and OCFS2_FILECHECK_ERR_INVALIDINO instead of
calling ocfs2_error(), but it must not allow a malformed dinode to proceed
into ocfs2_populate_inode(). |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: rawnand: pl353: fix probe resource allocation
During probe(), the devm_ioremap() is called with the parent device
instead of the current one. So when the module is unloaded, the register
area isn't released.
Target the pl35x device in the devm_ioremap() instead of its parent. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: tridentfb: fix potential memory leak in trident_pci_probe()
In trident_pci_probe(), the memory allocated for modelist using
fb_videomode_to_modelist() is not freed in subsequent error paths.
Fix that by calling fb_destroy_modelist(). |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: account pKVM reclaim against the VM mm
Protected guest faults charge long term pins to the VM's mm. Teardown
can run later from file release, where current->mm may be unrelated.
Drop the charge from kvm->mm instead. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: release pages on atomic dio size mismatch
If bio_iov_iter_get_pages() or the bounce helper succeeds but builds a
short bio, the REQ_ATOMIC size check rejects it before submission. The
old error path only dropped the bio reference, leaving any pages already
attached to the bio unreleased.
Release or unbounce the pages before falling through to out_put_bio on
this error path.
This bug was reported by sashiko:
https://sashiko.dev/#/patchset/20260608073134.95964-1-changfengnan%40bytedance.com |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free of fp->owner.name in durable handle owner check
Two concurrent SMB2 durable reconnects (DH2C/DHnC) on the same
persistent_id race the fp->owner.name compare-read in
ksmbd_vfs_compare_durable_owner() against the kfree() in
ksmbd_reopen_durable_fd()'s reopen-success path. fp->owner.name is a
standalone kstrdup() buffer whose lifetime is independent of the fp
refcount, and the two sites share no lock: the compare reads the buffer
while the reopen frees it, so the strcmp() can dereference freed memory.
Commit 7ce4fc40018d ("ksmbd: fix durable reconnect double-bind race in
ksmbd_reopen_durable_fd") made the fp->conn claim atomic under
global_ft.lock (closing the owner.name double-free and the ksmbd_file
write-UAF), but the compare-read versus reopen-free pair was left
unserialized.
BUG: KASAN: slab-use-after-free in strcmp+0x2c/0x80
Read of size 1 by task kworker
strcmp
ksmbd_vfs_compare_durable_owner
smb2_check_durable_oplock
smb2_open
Freed by task kworker:
kfree
ksmbd_reopen_durable_fd
smb2_open
Allocated by task kworker:
kstrdup
session_fd_check
smb2_session_logoff
The buggy address belongs to the cache kmalloc-8
Serialize both sides of the race with fp->f_lock. The global durable
file-table lock still protects the durable reconnect claim, but
fp->owner.name is per-open state and does not need to block unrelated
durable table lookups or reconnects. The teardown is left at its
existing location after the reopen-success point so that an __open_id()
rollback still retains owner.name for a later legitimate reconnect to
verify. |
| Unauthenticated Arbitrary File Upload in Piotnet Addons For Elementor Pro <= 7.1.67 versions. |
| Unauthenticated SQL Injection in Depicter Slider <= 4.8.0 versions. |
| Valkey is a distributed key-value database. Prior to 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1, Valkey's tlsProcessPendingData function iterates pending_list while an authenticated client can trigger CLIENT KILL, causing connTLSClose to delete the iterator's cached next node and producing a use-after-free that can crash the server or potentially allow remote code execution when TLS is enabled. This issue is fixed in versions 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1. |
| Valkey is a distributed key-value database. Prior to 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1, Valkey's RESTORE command accepts a malformed RDB stream payload that assigns one Pending Entry List NACK to multiple consumers during stream consumer-group deserialization, causing a use-after-free when one consumer is deleted while another still references the shared NACK and potentially allowing remote code execution. This issue is fixed in versions 7.2.14, 8.0.10, 8.1.9, 9.0.5, and 9.1.1. |
| Unexpected Status Code or Return Value vulnerability in ninenines gun (gun_http module) allows a malicious HTTP server to force the client into raw protocol mode via an unsolicited 101 Switching Protocols response.
In gun_http:handle_inform/8, when a 101 Switching Protocols response is received over HTTP/1.1, the function verifies only that the Upgrade header is syntactically valid and that the stream reference is a plain reference(). It does not check whether the client ever sent an Upgrade or Connection: upgrade header on the corresponding request. Because this check is absent, any 101 response (solicited or not) causes gun to dispatch a gun_upgrade message to the caller and transition the entire connection to raw protocol mode.
A malicious or compromised HTTP server can send an unsolicited 101 response to any HTTP/1.1 request, causing the gun client to abandon HTTP framing for that connection. Once in raw mode, gun_raw applies no flow control (flow=infinity) and re-arms socket active mode after every received packet, so the server can flood the client with arbitrary bytes. These are forwarded as unbounded gun_data messages to the owner process, exhausting its mailbox and BEAM memory, ultimately crashing the VM.
This issue affects gun: from 2.0.0 before 2.4.0. |
| NCalc is a fast, lightweight expression evaluator for .NET. Prior to 6.1.1, the factorial operator implementation in src/NCalc.Core/Helpers/MathHelper.cs permits specially crafted expressions with extremely large factorial operands, causing excessive CPU consumption or a non-terminating loop due to integer overflow in the factorial calculation logic when applications evaluate untrusted expressions. This issue is fixed in version 6.1.1. |
| Uncontrolled Resource Consumption vulnerability in ninenines gun (gun_http module) allows a malicious server to exhaust client memory via unbounded HTTP/1.1 response buffering.
In gun_http:handle/5, three clauses accumulate incoming TCP data into the connection's buffer field using binary concatenation with no upper-bound check: the head clause appends data until the \r\n\r\n header terminator is found; the body_chunked clause appends data whenever cow_http_te:stream_chunked/2 returns a more result indicating an incomplete chunk boundary; and the body_trailer clause appends data until the trailing \r\n\r\n is found. In each case, when the expected terminator never arrives, the enlarged binary is stored back into state and the process waits for more data, with no configurable or hard-coded ceiling on buffer size.
A malicious or compromised server can exploit this by sending a partial response that never completes. For example, a response may begin with HTTP/1.1 200 OK\r\nX-Pad: followed by an unbounded stream of arbitrary bytes, never sending the header terminator. The gun connection process will continuously append the incoming data to its buffer, causing unbounded heap growth. Because BEAM imposes no per-process heap limit by default, a single malicious connection can exhaust all available memory on the node, causing a node-wide out-of-memory crash.
This issue affects gun: from 1.0.0 before 2.4.0. |
