| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Do not try to iommu_map a 0 length region in swiotlb
iommu_dma_iova_link_swiotlb() processes a mapping that is unaligned in three
parts, the head, middle and trailer. If the middle is empty because there
are no aligned pages it will call down to iommu_map() with a 0 size
which the iommupt implementation will fail as illegal.
It then tries to do an error unwind and starts from the wrong spot
corrupting the mapping so the eventual destruction triggers a WARN_ON.
Check for 0 length and avoid mapping and use offset not 0 as the starting
point to unlink.
This is frequently triggered by using some kinds of thunderbolt NVMe
drives that trigger forced SWIOTLB for unaligned memory. NVMe seems to
pass in oddly aligned buffers for the passthrough commands from smartctl
that hit this condition. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fib: fix stale stack leak via the OIFNAME register
For NFT_FIB_RESULT_OIFNAME the destination register is declared with
len = IFNAMSIZ (four 32-bit registers), but on the lookup-fail,
RTN_LOCAL and oif-mismatch paths nft_fib{4,6}_eval() only writes one
register via "*dest = 0". The remaining three registers are left as
whatever was on the stack in nft_do_chain()'s struct nft_regs, and a
downstream expression that loads the register span can leak that
uninitialised kernel stack to userspace.
The NFTA_FIB_F_PRESENT existence check has the same shape: it is only
meaningful for NFT_FIB_RESULT_OIF, yet it was accepted for any result type
while the eval stores a single byte via nft_reg_store8(), leaving the rest
of the declared span stale.
Fix both:
- replace the bare "*dest = 0" in the eval with nft_fib_store_result(),
which strscpy_pad()s the whole IFNAMSIZ for OIFNAME (and is already
used on the other early-return path), and
- restrict NFTA_FIB_F_PRESENT to NFT_FIB_RESULT_OIF and declare its
destination as a single u8, so the marked span matches the one byte
the eval writes. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-failure: fix hugetlb_lock AA deadlock in get_huge_page_for_hwpoison
Two concurrent madvise(MADV_HWPOISON) calls on the same hugetlb page can
trigger a recursive spinlock self-deadlock (AA deadlock) on hugetlb_lock
when racing with a concurrent unmap:
thread#0 thread#1
-------- --------
madvise(folio, MADV_HWPOISON)
-> poisons the folio successfully
madvise(folio, MADV_HWPOISON) unmap(folio)
try_memory_failure_hugetlb
get_huge_page_for_hwpoison
spin_lock_irq(&hugetlb_lock) <- held
__get_huge_page_for_hwpoison
hugetlb_update_hwpoison()
-> MF_HUGETLB_FOLIO_PRE_POISONED
goto out:
folio_put()
refcount: 1 -> 0
free_huge_folio()
spin_lock_irqsave(&hugetlb_lock)
-> AA DEADLOCK!
The out: path in __get_huge_page_for_hwpoison() calls folio_put() to drop
the GUP reference while the hugetlb_lock is still held by the hugetlb.c
wrapper get_huge_page_for_hwpoison(). If concurrent unmap has released
the page table mapping reference, folio_put() drops the folio refcount to
zero, triggering free_huge_folio() which attempts to re-acquire the
non-recursive hugetlb_lock.
Fix this by moving hugetlb_lock acquisition from the hugetlb.c wrapper
into get_huge_page_for_hwpoison(). Place spin_unlock_irq() before the
folio_put() at the out: label so the folio is always released outside the
lock.
[akpm@linux-foundation.org: fix race, rename label per Miaohe] |
| The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to unauthorized modification of data due to missing validation checks in the confirm_payment() function in all versions up to, and including, 5.2.0. This makes it possible for unauthenticated attackers to bypass payment processing and activate paid memberships. |
| Setracker2 Android Companion App com.tgelec.setracker versions 3.1.5 and prior only require the password hash when authenticating with backend services from the client. This could allow an attacker, who knows the hash, to authenticate and gain full access. |
| Bludit CMS before version 3.18.4 allows Remote Code Execution (RCE) via the API Plugin. The POST /api/files/{key} endpoint in bl-plugins/api/plugin.php fails to perform authorization checks and lacks file extension validation. An attacker with a valid API token can upload a malicious PHP script and execute arbitrary code on the server. |
| Unauthenticated SQL Injection in Form Maker by 10Web <= 1.15.38 versions. |
| Unauthenticated Broken Access Control in AWP Classifieds <= 4.4.4 versions. |
| The Video Conferencing with Zoom plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 4.6.7. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for unauthenticated attackers to obtain the site's Zoom SDK API key and a freshly-signed JWT that can be used with the Zoom Web SDK to join any Zoom meeting associated with those credentials without a legitimate invitation. |
| A denial-of-service vulnerability exists in NPort devices because of improper access control on the command port. The command interface does not properly validate whether a sender is associated with a valid data port session before accepting break signal commands. A remote attacker with network access can send crafted requests to disrupt serial communication for an active user session. |
| A security issue was identified in Pavilion due to improper authorization enforcement in API endpoints. This vulnerability can allow an unauthorized actor to execute privileged operations, including user/role management and other administrative actions. |
| LangGraph Python SDK is used to connect to running LangGraph API servers, manage assistants, threads and stream runs from Python applications. Versions 0.3.14 and prior have unsafe URL path construction through unsanitized caller-supplied identifier values used in HTTP request paths for resource operations. Without sanitization of those values, identifiers that contain characters with special meaning in URL paths could cause the resulting request to address a different resource (and potentially a different resource type) than the SDK method's call site indicates. In deployments where the SDK receives identifier values that originate from untrusted sources, this could result in unintended access, modification, or deletion of resources beyond the calling user's authorization scope. This issue is most consequential in deployments that forward end-user-supplied values directly into SDK identifier parameters without first validating them against an expected format (such as a UUID), and rely on URL-prefix-based authorization at an upstream layer (reverse proxy, edge gateway, WAF), where the authorization decision is made on the SDK call's intended path rather than on the final delivered request path. The issue has been fixed in version 0.3.15. |
| The LearnPress WordPress plugin before 4.3.7 does not gate the `edit` context on one of its REST endpoint behind the `edit_users` capability, allowing unauthenticated visitors to retrieve each returned user's roles, full capabilities map, extra capabilities, locale, and registration date via a crafted request |
| Subscriber Broken Access Control in WPBakery Page Builder <= 8.7.2 versions. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in Brainstorm Force SureDash allows Blind SQL Injection.
This issue affects SureDash: from n/a through 1.8.0. |
| Dell PowerFlex Manager, version(s) prior to 5.1.0.1, contain(s) an Inclusion of Functionality from Untrusted Control Sphere vulnerability. An unauthenticated attacker with remote access could potentially exploit this vulnerability, leading to Information disclosure. |
| Dell PowerFlex Manager, version(s) prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to information disclosure. |
| Dell PowerFlex Manager, version(s) prior to 5.1.0.1, contain(s) an Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability. A low privileged attacker with adjacent network access could potentially exploit this vulnerability, leading to Script injection. |
| Warp is an agentic development environment. From 0.2021.04.25.23.05.stable_00 until 0.2026.05.06.15.42.stable_01, Warp accepted certain state-mutating terminal lifecycle hooks from the PTY stream without verifying that the hooks were emitted by Warp's shell integration for the active session. An attacker who could cause a victim to view attacker-controlled terminal output in Warp could spoof selected lifecycle metadata, including the current working directory reported for the active block or SSH session transport metadata. This vulnerability is fixed in 0.2026.05.06.15.42.stable_01. |
| The Tourfic – AI Powered Travel Booking, Hotel Booking & Car Rental WordPress Plugin plugin for WordPress is vulnerable to generic SQL Injection via the 'post_id' parameter in all versions up to, and including, 2.22.7 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. The AJAX handler is registered for unauthenticated users via wp_ajax_nopriv_tf_room_availability, and the required nonce is emitted on the public single-hotel page template, allowing unauthenticated attackers to freely obtain a valid nonce and reach the vulnerable code path. |
