| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Twig is a template language for PHP. From 3.0.0 until 3.26.0, Twig\Profiler\Dumper\HtmlDumper writes Profile::getTemplate() and Profile::getName() into HTML output without escaping, allowing attacker-controlled template or profile names to inject arbitrary HTML when a browser renders the profiler dump. This issue is fixed in version 3.26.0. |
| A security flaw has been discovered in zevorn rt-claw up to 0.2.0. This affects the function tool_run_script_execute of the file claw/services/tools/script.c of the component Telegram-to-AI Tool Execution Flow. Performing a manipulation results in code injection. It is possible to initiate the attack remotely. The exploit has been released to the public and may be used for attacks. The project was informed of the problem early through an issue report but has not responded yet. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: digi_acceleport: fix memory corruption with small endpoints
Add the missing bulk-out buffer size sanity checks to avoid
out-of-bounds memory accesses or slab corruption should a malicious
device report smaller buffers than expected. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: composite: fix integer underflow in WebUSB GET_URL handling
The WebUSB GET_URL handler in composite_setup() narrows
landing_page_length to fit the host-supplied wLength using
landing_page_length = w_length
- WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH + landing_page_offset;
If wLength is smaller than WEBUSB_URL_DESCRIPTOR_HEADER_LENGTH the
unsigned subtraction wraps, and the subsequent
memcpy(url_descriptor->URL,
cdev->landing_page + landing_page_offset,
landing_page_length - landing_page_offset);
ends up copying close to UINT_MAX bytes from cdev->landing_page into
cdev->req->buf. KASAN reports a slab-out-of-bounds in composite_setup
on the kmalloc-2k gadget_info allocation, and FORTIFY_SOURCE traps the
memcpy as a 4294967293-byte field-spanning write into
url_descriptor->URL (size 252).
A USB host can reach this from a single SETUP packet against any
gadget that has webusb/use=1 and a landingPage configured.
Handle the small-wLength case before the math: when the host requested
fewer bytes than the URL descriptor header, only the header is
meaningful and no URL bytes need to be copied. Setting
landing_page_length to landing_page_offset makes the existing memcpy a
no-op and leaves the descriptor returned to the host unchanged for all
larger wLength values. |
| A vulnerability was identified in SourceCodester Class and Exam Timetabling System 1.0. Affected by this issue is some unknown functionality of the file /schoolyr.php. The manipulation of the argument sy leads to cross site scripting. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI: mediatek-gen3: Prevent leaking IRQ domains when IRQ not found
In mtk_pcie_setup_irq(), the IRQ domains are allocated before the
controller's IRQ is fetched. If the latter fails, the function
directly returns an error, without cleaning up the allocated domains.
Hence, reverse the order so that the IRQ domains are allocated after the
controller's IRQ is found.
This was flagged by Sashiko during a review of "[PATCH v6 0/7] PCI:
mediatek-gen3: add power control support". |
| The WPForms – AI Form Builder for WordPress – Contact Forms, Payment Forms, Survey Form, Quiz & More plugin for WordPress is vulnerable to Stored Cross-Site Scripting via OptinMonster Integration data-sitekey Attribute in Post Content in all versions up to, and including, 2.0.0.1 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. Exploitation requires the OptinMonster plugin to be installed and configured with an active inline campaign that outputs matching #om-{id} markup on the target page, as the WPForms handler only fires when OptinMonster emits its 'om.Campaign.load' event. |
| CI4MS is a CodeIgniter 4-based content management system skeleton. Prior to version 0.31.9.0, the custom `html_purify` validation rule used to sanitize blog post bodies relies on by-reference mutation (`?string &$str`), but CodeIgniter 4's validator passes a local copy of the value, so the sanitized text is silently discarded. The Blog controller writes `$lanData['content']` directly into `blog_langs.content`, and the public template echoes it without escaping — yielding stored XSS executable in any visitor's browser, including the superadmin when previewing or editing posts. Version 0.31.9.0 patches the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: Check for underflow in xfrm_state_mtu
Leo Lin reported OOB write issue in esp component:
xfrm_state_mtu() returns u32 but performs its arithmetic in unsigned
modulo-2^32 space using an attacker-influenced "header_len + authsize +
net_adj" subtracted from a small "mtu" argument. A nobody user can
install an IPv4 ESP tunnel SA with a large authentication key
(XFRMA_ALG_AUTH_TRUNC, e.g. hmac(sha512), 64-byte key, 64-byte trunc),
configure a small interface MTU (68 bytes), and set XFRMA_TFCPAD to a
large value. When a single UDP datagram is then sent through the
tunnel, xfrm_state_mtu() underflows to a near-2^32 value, and
esp_output() consumes it as a signed int via:
padto = min(x->tfcpad, xfrm_state_mtu(x, mtu_cached))
esp.tfclen = padto - skb->len (assigned to int)
esp.tfclen ends up negative (e.g. -207). It is sign-extended to size_t
when passed to memset() inside esp_output_fill_trailer(), producing a
~16 EB write of zeroes at skb_tail_pointer(skb). KASAN logs it as
"Write of size 18446744073709551537 at addr ffff888...".
Check for underflow and return 1. This causes the sendmsg attempt to
fail with ENETUNREACH. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-pci: fix dma_vecs leak on p2p memory
We don't unmap P2P memory, so we don't need to track it. The dma_vec
allocation was getting leaked on the completion. |
| pgjdbc is an open source postgresql JDBC Driver. In releases 42.7.4 through 42.7.11, channelBinding=require connections can be silently downgraded from SCRAM-SHA-256-PLUS with channel binding to plain SCRAM-SHA-256 without it, losing the man-in-the-middle protection the setting is meant to guarantee. An attacker who can intercept the TLS connection can trigger the downgrade with a certificate whose signature algorithm has no tls-server-end-point channel-binding hash, because the bundled com.ongres.scram:scram-client returns an empty byte array instead of failing and pgJDBC ScramAuthenticator checks only that the server advertised a PLUS mechanism, without rejecting the empty binding or checking that the negotiated mechanism uses channel binding. This issue is fixed in version 42.7.12. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: require exact CDB reply length
Malicious SFP module could respond with rpl_len longer than
what cmis_cdb_process_reply() expected, leading to OOB writes.
Malicious HW is a bit theoretical but some modules may just
be buggy and/or the reads may occasionally get corrupted,
so let's protect the kernel.
The existing check protects from short replies. We need to
protect from long ones, too. All callers that pass a non-zero
rpl_exp_len cast the reply payload to a fixed-layout struct
and read fields at fixed offsets, with no version negotiation
or short-reply handling:
- cmis_cdb_validate_password()
- cmis_cdb_module_features_get()
- cmis_fw_update_fw_mng_features_get()
so let's assume that responses longer than expected do not
have to be handled gracefully here. Add a warning message
to make the debug easier in case my understanding is wrong...
Note that page_data->length (argument of kmalloc) comes from
last arg to ethtool_cmis_page_init() which is rpl_exp_len.
Note2 that AIs also like to point out overflows in args->req.payload
itself (which is a fixed-size 120 B buffer, on the stack),
but callers should be reading structs defined by the standard,
so protecting from requests for more data than max seem like
defensive programming. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: fix a vulnerability of integer overflow in kfd debugger
get_queue_ids() computes array_size = num_queues * sizeof(uint32_t),
which could overflow on 32-bit size_t build. using array_size()
instead, it saturates to SIZE_MAX on overflow.
(cherry picked from commit 2d57a0475f085c08b49312dfd8edcb461845f285) |
| A weakness has been identified in itsourcecode Hospital Management System 1.0. This affects an unknown function of the file /prescriptionrecord.php. This manipulation of the argument delid causes sql injection. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| The LearnPress WordPress plugin before 4.4.1 does not escape a search parameter before reflecting it into an HTML attribute, leading to Reflected Cross-Site Scripting that executes in the browser of a logged-in instructor or administrator who is tricked into opening a crafted link. |
| Symfony UX is a JavaScript ecosystem for Symfony. From 2.2.0 until 2.36.0 and 3.1.0, the Stimulus controller in symfony/ux-autocomplete renders AJAX response items in _createAutocompleteWithRemoteData() by interpolating the text field into HTML template literals (<div>${item[labelField]}</div>) rather than text, allowing attacker-controlled markup from user-supplied dropdown values to execute in the browser of any user who opens an autocomplete widget backed by the same data. This issue is fixed in versions 2.36.0 and 3.1.0. |
| A vulnerability was found in code-projects Hospital Bed Management System 1.0. This affects an unknown part of the component Login Form. Performing a manipulation of the argument Username results in sql injection. Remote exploitation of the attack is possible. The exploit has been made public and could be used. |
| CI4MS is a CodeIgniter 4-based content management system skeleton. Prior to version 0.31.9.0, the `Pages` backend module registers the `html_purify` validation rule on language-keyed page content but persists the raw, un-purified POST value into the database. The public renderer for pages (`Home::index()` → `app/Views/templates/default/pages.php`) emits `$pageInfo->content` without `esc()`, yielding stored XSS that fires for every public visitor of the affected page — including administrators. Because pages may be promoted to the site home page, the payload can be served at `/` and reach every visitor of the site. Version 0.31.9.0 patches the issue. |
| Mailpit is an email testing tool and API for developers. Prior to version 1.30.0, the screenshot/print proxy (/proxy?data=…) maintains a package-level assets map[string]MessageAssets cache, but reads the map without holding assetsMutex while a long-running cleanup goroutine and (re-entrant) CSS-rewriting code path concurrently write to it under the lock. When the unsynchronized read coincides with a synchronized write, Go's runtime raises fatal error: concurrent map read and map write — a runtime.throw that is not recoverable by http.Server's handler-panic recover. The whole Mailpit process exits, taking the SMTP, POP3 and HTTP listeners down with it. Version 1.30.0 contains a patch. |
| CI4MS is a CodeIgniter 4-based content management system skeleton. Prior to version 0.31.9.0, the Fileeditor module enforces an extension allowlist (`['css','js','html','txt','json','sql','md']`) on content-write operations (`saveFile`, `createFile`), but two destructive endpoints — `deleteFileOrFolder` and `renameFile` — never validate the extension of the *source* path. A backend user with file-editor permissions can therefore unlink or rename any file inside the project root that is not explicitly listed in the small `$hiddenItems` blocklist. Critical framework files such as `app/Config/Routes.php`, `app/Config/App.php`, `app/Config/Database.php`, `app/Config/Filters.php`, `public/index.php`, and `public/.htaccess` all live outside that blocklist and can be destroyed, producing a persistent denial of service that requires filesystem-level redeployment to recover. Version 0.31.9.0 patches the issue. |
