| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one in mapping pairs decoding bounds checks
In ntfs_mapping_pairs_decompress(), attr_end points one byte past the
end of the attribute record:
attr_end = (u8 *)attr + le32_to_cpu(attr->length);
The two bounds checks validating that mapping pair data bytes fit within
the attribute use strict greater-than (>), which allows a one-byte
out-of-bounds read when the data extends exactly to attr_end:
b = *buf & 0xf;
if (b) {
if (unlikely(buf + b > attr_end)) // off-by-one
goto io_error;
for (deltaxcn = (s8)buf[b--]; b; b--)
deltaxcn = (deltaxcn << 8) + buf[b];
}
When buf + b == attr_end, the check evaluates to false and buf[b] reads
one byte past the valid attribute boundary. The same pattern appears in
the LCN delta bytes check.
Fix both checks to use >= so that buf[b] at exactly attr_end is
correctly rejected as out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate attribute values on lookup
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: add bounds check before accessing EA entries
in ntfs_ea_lookup and ntfs_listxattr, this verifies that there is enough
space in the EA entry before accessing the next_entry_offset field of
the EA entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: not change 0-byte $DATA attribute to non-resident
When ntfs_resident_attr_resize() cannot grow a resident attribute in
place, it retries after converting other resident attributes to
non-resident to free space in the MFT recrord.
Do not select zero-length resident $DATA attributes for this conversion.
fsck treats 0-byte non-resident $DATA attribute as corruptions. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index block header more strictly
Modify ntfs_index_block_inconsisent() to perform stricter validation of
INDEX_HEADER geometry in INDX blocks, and update
ntfs_lookup_inode_by_name() to use that function to validate INDX
blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: centalize $INDEX_ROOT header validation
Add a dedicated helper to perform stricter validation of $INDEX_ROOT and
use it for both directory inodes and named index inodes. This keeps the
root size and header geometry checks consistent across both read paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: skip extent mft records in writeback to prevent deadlock
This patch fixes the ABBA deadlock between extent_lock and extent
mrec_lock triggered by xfstests generic/113, that occurs since the commit
6994acf33bae ("ntfs: use base mft_no when looking up base inode for
extent record").
Path A (inode writeback):
VFS writeback
-> ntfs_write_inode()
-> __ntfs_write_inode()
-> mutex_lock(&ni->extent_lock)
-> mutex_lock(&tni->mrec_lock)
Path B (MFT folio writeback):
VFS writeback of $MFT dirty folios
-> ntfs_mft_writepages()
-> ntfs_write_mft_block()
-> ntfs_may_write_mft_record()
-> holds one extent mrec_lock from a previous iteration
-> tries to acquire another base inode extent_lock
By removing all extent_lock and extent mrec_lock acquisition from the MFT
folio writeback path, the ABBA lock ordering is eliminated:
Path A: __ntfs_write_inode(): extent_lock -> mrec_lock
Path B (removed): ntfs_write_mft_block(): mrec_lock -> extent_lock
Path B is always redundant for extent records because:
1. mark_mft_record_dirty(ext_ni) does NOT dirty the MFT folio.
It only sets NInoDirty(ext_ni) and marks the base VFS inode dirty
via __mark_inode_dirty(I_DIRTY_DATASYNC), which triggers Path A.
Therefore, normal extent modifications never create a situation where
the MFT folio is dirty and Path B is not scheduled.
2. The MFT folio only gets dirtied via ntfs_mft_mark_dirty() inside
ntfs_mft_record_alloc(). But all identified callers in attrib.c
(ntfs_attr_add, ntfs_attr_record_move_away,
ntfs_attr_make_non_resident, ntfs_attr_record_resize) follow through
with mark_mft_record_dirty(), which triggers Path A to write the
complete record.
3. ntfs_evict_big_inode() calls ntfs_commit_inode() before freeing extent
inodes, ensuring all dirty extents are flushed via Path A before the
base inode leaves the icache. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: avoid heap allocation for free-cluster readahead state
get_nr_free_clusters() allocates a temporary file_ra_state before it
publishes the precomputed free cluster count, sets NVolFreeClusterKnown(),
and wakes vol->free_waitq. If that allocation fails, the worker returns
without setting the flag or waking waiters, so callers waiting for the free
count can block indefinitely.
The readahead state is only used synchronously while scanning the bitmap.
Keep it on the stack and pass it by address to the readahead helper. This
eliminates the early allocation failure path instead of adding a special
case that publishes a conservative count and wakes the waitqueue.
Zero-initialize the on-stack state because file_ra_state_init() only sets
ra_pages and prev_pos.
Apply the same treatment to __get_nr_free_mft_records(), which scans the
MFT bitmap with the same short-lived readahead state. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index entries on reading
Validate index entries immediately after reading an index root or index
block from disk. This eliminates repeated checks in lookup and readdir,
and reduce the risk of missing checks in those paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: detect mapping-pairs LCN accumulator overflow
The NTFS mapping-pairs parser accumulates relative LCN deltas in a
signed integer. A corrupted attribute can drive that addition past
the representable range.
One corrupt runlist shape sets the accumulated LCN to S64_MAX and
then adds a delta of 1 in the next mapping-pairs entry.
Signed overflow is undefined and can turn an invalid runlist into a
different set of physical clusters.
Check the LCN addition for overflow before storing the next run. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate resident index root values on lookup
Resident $INDEX_ROOT values carry index header fields that callers
consume after lookup. Some callers already validate parts of the layout
before walking entries, but those checks are scattered and do not cover
all root header invariants, such as entries_offset alignment and lower
bound, index_length, and allocated_size consistency.
The resident root resize paths now keep these header fields consistent
while the value size changes: ntfs_ir_truncate() lowers
index.allocated_size before shrinking the resident value, and
ntfs_ir_reparent() grows the resident value before publishing a larger
root header. Lookup-time validation can therefore cover these invariants
without tripping over the driver's own resize paths.
Add $INDEX_ROOT to the minimum resident value size table and validate the
resident index header fields before returning the attribute from lookup.
Require 8-byte aligned index header fields, a sane entries_offset, an
index_length within allocated_size, allocated_size within the resident
value, and enough entry space for at least an index entry header.
The shared validator already rejects non-resident records for
resident-only attribute types, including $INDEX_ROOT. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject non-resident records for resident-only attributes
The shared lookup-time attribute validator rejects non-resident
$FILE_NAME and $VOLUME_NAME records because their formats require
resident values and callers handle returned records as resident
attributes. Other resident-only attribute types still pass through the
generic non-resident mapping-pairs checks.
That leaves real resident/non-resident union confusion paths. Inode load
looks up $STANDARD_INFORMATION and then reads data.resident.value_offset
without checking a->non_resident. ntfs_inode_sync_standard_information()
does the same when updating the standard information value.
ntfs_write_volume_flags() also looks up $VOLUME_INFORMATION and reads
data.resident.value_offset directly. $INDEX_ROOT callers in dir.c and
index.c depend on the same lookup contract before consuming the resident
index root value.
Reject non-resident records for all resident-only attribute types in the
shared validator. Keep the existing $FILE_NAME and $VOLUME_NAME behavior,
but factor it through a helper and extend it to
$STANDARD_INFORMATION, $OBJECT_ID, $VOLUME_INFORMATION, $INDEX_ROOT, and
$EA_INFORMATION. For $OBJECT_ID and $EA_INFORMATION this is contract
hardening for resident-only formats; this patch only rejects the
non-resident form and does not add new resident value validation for
those types. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound DeleteIndexEntryAllocation memmove length
In do_action()'s DeleteIndexEntryAllocation case, e->size comes
from an on-disk INDEX_BUFFER entry. When e->size makes
e + e->size point past hdr + hdr->used,
PtrOffset(e1, Add2Ptr(hdr, used)) returns a negative ptrdiff_t
that is silently cast to a quasi-infinite size_t when passed
to memmove(). The memmove then walks past the destination
buffer.
The sibling DeleteIndexEntryRoot case at fslog.c:3540-3543
already carries the corresponding guard:
if (PtrOffset(e1, Add2Ptr(hdr, used)) < esize ||
Add2Ptr(e, esize) > Add2Ptr(lrh, rec_len) ||
used + esize > le32_to_cpu(hdr->total)) {
goto dirty_vol;
}
Apply the same shape to the allocation-path case. Also reject
esize == 0: memmove(e, e, ...) is a no-op and leaves
hdr->used unchanged, hiding a malformed entry from the
existing check_index_header() walk.
Reproduced under UML+KASAN on mainline 8d90b09e6741 by
mounting a crafted NTFS image: the unguarded memmove takes a
length of 0xffffffffffffff00 and the kernel oopses in
memmove+0x81/0x1a0 on the do_action+0x36a2 frame.
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound copy_lcns dp->page_lcns[] index in analysis pass
In log_replay()'s analysis pass, after find_dp() returns a
valid DIR_PAGE_ENTRY for the (target_attr, target_vcn) tuple,
the copy_lcns block walks lrh->lcns_follow further entries:
t16 = le16_to_cpu(lrh->lcns_follow);
for (i = 0; i < t16; i++) {
size_t j = (size_t)(le64_to_cpu(lrh->target_vcn) -
le64_to_cpu(dp->vcn));
dp->page_lcns[j + i] = lrh->page_lcns[i];
}
find_dp() only validates that target_vcn falls within
[dp->vcn, dp->vcn + dp->lcns_follow), i.e., that the FIRST
cluster is covered. The walk through the further entries is
not bounded against dp->lcns_follow. For a malformed LRH
where target_vcn = dp->vcn + dp->lcns_follow - 1 and
lrh->lcns_follow > 1, the i > 0 writes overflow the dp's
allocated page_lcns[] array.
Add the missing j + lrh->lcns_follow <= dp->lcns_follow guard.
Reproduced under UML+KASAN on mainline 8d90b09e6741 as a
slab-out-of-bounds write of size 8 from log_replay+0x68d4 on
the mount path.
This is distinct from Pavitra Jha's 2026-05-02 patch
("fs/ntfs3: validate lcns_follow in log_replay conversion",
<20260502154252.164586-1-jhapavitra98@gmail.com>) which
addresses the separate version-0 dirty-page-table conversion
path's memmove(&dp->vcn, ...) call. The two fixes are
complementary; both should land.
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes,
fixed conflicts] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: bound attr_off in UpdateResidentValue against data_off
In do_action()'s UpdateResidentValue case (fslog.c:3307),
lrh->attr_off and lrh->redo_len come from the on-disk LRH.
When they satisfy aoff + dlen < attr->res.data_off, the
assignment
attr->res.data_size = cpu_to_le32(aoff + dlen - data_off);
underflows to ~4 GiB (e.g. 0xFFFFFFF9 when aoff=0x10, dlen=1,
data_off=0x18). Subsequent code that reads attr->res.data_size
to walk the resident attribute payload would then read up to
4 GiB past the 1024-byte MFT record allocation.
The existing mi_enum_attr() defense in fs/ntfs3/record.c:287
catches the corrupted data_size on the next attribute walk
and fails the mount, but only on the path that walks all
attributes. A read site that picks an attribute by name and
reads its data_size without re-validating is not covered.
Validate aoff against data_off and asize at the source.
Reproduced under UML+KASAN on mainline 8d90b09e6741 via
pr_warn-only probe: with aoff=0x10 and data_off=0x18, the
post-assignment data_size is 0xfffffff9 (mount then fails
at -22 from mi_enum_attr).
[almaz.alexandrovich@paragon-software.com: clang-formatted the changes] |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: add depth limit to indx_find_buffer to prevent stack overflow
indx_find_buffer() recursively descends the B+ tree index with no depth
limit. A crafted NTFS image with circular index node references causes
unbounded recursion, overflowing the kernel stack and panicking the
system.
This is reachable by mounting a malicious NTFS filesystem (e.g. from a
USB drive via desktop automount) and deleting a file whose index entry
triggers the rebalancing fallback path in indx_delete_entry().
Add a depth parameter and bail out with -EINVAL when it reaches the
fnd->nodes array bound, matching the constraint already enforced by
fnd_push() in indx_find().
The related function indx_find() was previously patched for a similar
infinite-loop issue (commit 1732053c8a6b), but indx_find_buffer() was
missed. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: bound to_move in indx_insert_into_root before hdr_insert_head
indx_insert_into_root() promotes a full resident $INDEX_ROOT into
$INDEX_ALLOCATION and copies all non-last resident root entries into
a newly allocated INDEX_BUFFER via hdr_insert_head(). The source
byte count 'to_move' is summed from the on-disk resident entry sizes
and is independent of the destination buffer size, which comes from
root->index_block_size (via indx->index_bits).
A crafted NTFS image that keeps a valid, full resident root but
shrinks root->index_block_size down to 512 after the root has been
populated makes hdr_insert_head() memcpy attacker-controlled resident
entry bytes past the end of the kmalloc(1u << indx->index_bits)
allocation returned by indx_new(). For a 512-byte destination and a
resident root whose non-last entries total 560 bytes, the memcpy
overruns by 120 bytes and a following memmove extends the highest
written offset to 136 bytes past the allocation. The overflow bytes
are a direct copy of on-disk entries (via kmemdup), so they are
fully attacker-controlled.
The write is reachable from unprivileged open(O_CREAT) on a mounted
crafted NTFS image: a single sufficiently long create in a directory
whose resident root is already full forces root promotion and
triggers the copy.
This is a controlled out-of-bounds write of 120-136 bytes past a
kmalloc(index_block_size) allocation, with attacker-controlled
content. It is a bounded adjacent-heap corruption primitive; it is
not an arbitrary-address write. Successful exploitation into a named
victim object depends on the surrounding slab layout.
Reject the copy at the sink. The destination's INDEX_HDR already
reports hdr_total (the payload capacity of the new buffer) and
hdr_used (the bytes already consumed by the terminal END entry
installed by indx_new()); require that to_move fits in the remaining
payload before calling hdr_insert_head(). On mismatch, fail with
-EINVAL and mark the filesystem as having a detected on-disk
inconsistency, which is the same behaviour as the surrounding
validation in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: validate split-point offset in indx_insert_into_buffer
indx_insert_into_buffer() computes
used = used1 - to_copy - sp_size;
memmove(de_t, Add2Ptr(sp, sp_size), used - le32_to_cpu(hdr1->de_off));
where sp and sp_size come from hdr_find_split(). hdr_find_split()
walks entries by le16_to_cpu(e->size) without validating that each
step stays within hdr->used or that the size field is at least
sizeof(struct NTFS_DE). index_hdr_check(), the on-load gatekeeper,
only validates header-level fields (used, total, de_off) and does
not walk per-entry sizes.
A crafted NTFS image whose leaf INDEX_HDR reports used == total but
contains one interior NTFS_DE with size = 0xFFF0 therefore passes
validation, descends to indx_insert_into_buffer() through the
ntfs_create() -> indx_insert_entry() path, and makes hdr_find_split()
return an sp whose sp_size (0xFFF0) greatly exceeds the remaining
bytes in the buffer. The u32 subtraction underflows and the memmove
count becomes a near-4-GiB value, producing an out-of-bounds kernel
write that corrupts adjacent allocations and panics the kernel.
Reproduced on 7.0.0-rc7 with UML + KASAN via a crafted image and a
single 'touch' inside the mounted directory; crash site resolves to
fs/ntfs3/index.c at the memmove. Trigger requires only local mount
of an attacker-supplied filesystem image (USB, loopback, or removable
media auto-mount).
Reject the split whenever the chosen sp plus its declared size
already extends past hdr1->used. This is the minimal fix; it
preserves the existing hdr_find_split() contract and relies on the
same out: cleanup path as the pre-existing error returns.
A prior OOB read in the very same indx_insert_into_buffer() memmove
was fixed in commit b8c44949044e ("fs/ntfs3: Fix OOB read in
indx_insert_into_buffer") by tightening hdr_find_e(), but that fix
does not cover the split-point size field path addressed here: sp is
returned by hdr_find_split(), not hdr_find_e(), and the underflow is
driven by sp->size rather than hdr->used exceeding hdr->total. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: sanitize MFT references returned from ntfs_lookup_inode_by_name()
ntfs_lookup_inode_by_name() returns MFT references read from directory
index entries on disk. These values are untrusted, but the function can
currently return an error-marked MFT reference to its callers without
validating it.
Callers later decode lookup failures with MREF_ERR(). A crafted NTFS image
can set the MREF error bit while leaving the low bits as an arbitrary
value, causing callers to consume a bogus pseudo-errno instead of treating
the lookup result as corrupted on-disk metadata.
Fix this at the source by normalizing every error-marked MFT reference
returned from ntfs_lookup_inode_by_name() to ERR_MREF(-EIO). Apply this to
all four directory lookup return paths so every caller gets a validated
result without needing additional checks or an API change.
This keeps the sanitization in the common lookup helper, which is cleaner
than duplicating validation in each caller. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: make system files immutable to prevent corruption
When a system file such as $Bitmap is exposed via show_sys_files and
written from userspace, the volume is corrupted and, because the cluster
allocator scans $Bitmap through the same inode's page cache, a write to
$Bitmap also deadlocks writeback against the folio it already holds locked.
These files are maintained by the driver itself and have no valid reason
to be written through the file interface. Mark base metadata files
(mft_no < FILE_first_user) as immutable during inode read so the VFS
rejects write, mmap, truncate and unlink with -EPERM. Directories are
skipped so the root and $Extend remain usable. Internal metadata updates
do not go through the VFS write path and are unaffected. |
