| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5: LAG, Fix off-by-one in single-FDB error rollback
On failure at index i, the reverse cleanup loop in
mlx5_lag_create_single_fdb() starts from i, so the failed index
itself is rolled back. That can operate on uninitialized state or
double-tear-down a rule the add_one path already self-rolled-back.
Start the rollback from i - 1 so only successfully-installed entries
are undone. |
| In the Linux kernel, the following vulnerability has been resolved:
gue: validate REMCSUM private option length
GUE private flags can indicate that remote checksum offload metadata is
present. The private flags field itself is accounted for by
guehdr_flags_len(), but guehdr_priv_flags_len() currently returns 0 even
when GUE_PFLAG_REMCSUM is set.
This lets a packet with only the private flags field pass
validate_gue_flags(), after which gue_remcsum() and gue_gro_remcsum()
read the missing REMCSUM start/offset fields from the following bytes.
Account for GUE_PLEN_REMCSUM when GUE_PFLAG_REMCSUM is present so that
malformed packets are rejected during option validation. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: fix use-after-free of DSA ports in crc_err_work
Upon an MDIO CRC error mxl862xx_crc_err_work_fn() walks the DSA ports
and closes the CPU port conduits:
dsa_switch_for_each_cpu_port(dp, priv->ds)
dev_close(dp->conduit);
mxl862xx_remove() unregisters the switch before cancelling this work:
set_bit(MXL862XX_FLAG_WORK_STOPPED, &priv->flags);
cancel_delayed_work_sync(&priv->stats_work);
dsa_unregister_switch(ds);
mxl862xx_host_shutdown(priv);
dsa_unregister_switch() frees the dsa_port objects. If a CRC error
schedules the work during teardown it can run after the ports have been
freed and dereference freed memory.
Guard the port walk with MXL862XX_FLAG_WORK_STOPPED, which is already set
before dsa_unregister_switch(). DSA tears the ports down under
rtnl_lock(), so checking the flag under rtnl_lock() means the work either
runs before teardown and sees valid ports, or runs afterwards, observes
the flag and skips the walk. This mirrors the host_flood_work handler,
which skips torn-down ports under rtnl_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_compat: ebtables emulation must reject non-bridge targets
xtables targets return netfilter verdicts: NF_ACCEPT, NF_DROP, and so
on. ebtables targets return incompatible verdicts: EBT_ACCEPT,
EBT_DROP, ... We cannot allow fallback to NFPROTO_UNSPEC.
ebtables doesn't permit this since
11ff7288beb2 ("netfilter: ebtables: reject non-bridge targets")
but that commit missed the nft_compat layer. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_nat: avoid invalid nat_net pointer use on failed nf_nat_init()
We ran into below KASAN splat, which is mostly uninteresting, beside
for having nf_nat_register_fn() in the call chain as a cause for the
offending access:
==================================================================
BUG: KASAN: slab-out-of-bounds in nf_nat_register_fn+0x5f9/0x640
Read of size 8 at addr ffff890031e54c20 by task iptables/9510
CPU: 0 UID: 0 PID: 9510 Comm: iptables Not tainted 6.18.18-grsec-full-20260320181326 #1 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
[…] dump_stack_lvl+0xee/0x160 ffff88004117eeb8
[…] print_report+0x6e/0x640 ffff88004117eee0
[…] ? __phys_addr+0x8e/0x140 ffff88004117eef0
[…] ? kasan_addr_to_slab+0x51/0xe0 ffff88004117ef08
[…] ? complete_report_info+0xec/0x1c0 ffff88004117ef20
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef48
[…] kasan_report+0xbc/0x140 ffff88004117ef50
[…] ? nf_nat_register_fn+0x5f9/0x640 ffff88004117ef90
[…] nf_nat_register_fn+0x5f9/0x640 ffff88004117eff8
[…] ? nf_nat_icmp_reply_translation+0x6e0/0x6e0 ffff88004117f070
[…] nf_tables_register_hook.part.0+0xa0/0x220 ffff88004117f080
[…] nf_tables_addchain.constprop.0+0x1054/0x1fc0 ffff88004117f0b8
[…] ? nft_chain_lookup.part.0+0x4ce/0xac0 ffff88004117f130
[…] ? nf_tables_abort+0x3d80/0x3d80 ffff88004117f190
[…] ? nf_tables_dumpreset_obj+0x100/0x100 ffff88004117f1c8
[…] ? nft_table_lookup.part.0+0x255/0x300 ffff88004117f310
[…] ? nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f358
[…] nf_tables_newchain+0x21a4/0x2fa0 ffff88004117f360
[…] ? nf_tables_addchain.constprop.0+0x1fc0/0x1fc0 ffff88004117f458
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f488
[…] ? lock_acquire+0x16f/0x320 ffff88004117f490
[…] ? find_held_lock+0x3b/0xe0 ffff88004117f4b0
[…] ? __nla_parse+0x45/0x80 ffff88004117f500
[…] nfnetlink_rcv_batch+0xbca/0x19a0 ffff88004117f550
[…] ? nfnetlink_net_exit_batch+0x120/0x120 ffff88004117f618
[…] ? __sanitizer_cov_trace_switch+0x63/0xe0 ffff88004117f720
[…] ? gr_acl_handle_mmap+0x1c4/0x320 ffff88004117f7c0
[…] ? nla_get_range_signed+0x4a0/0x4a0 ffff88004117f7e8
[…] ? gr_is_capable+0x6f/0xe0 ffff88004117f830
[…] ? __nla_parse+0x45/0x80 ffff88004117f860
[…] ? skb_pull+0x103/0x1a0 ffff88004117f880
[…] nfnetlink_rcv+0x3db/0x4a0 ffff88004117f8b0
[…] ? nfnetlink_rcv_batch+0x19a0/0x19a0 ffff88004117f8d8
[…] ? netlink_lookup+0xe2/0x240 ffff88004117f900
[…] netlink_unicast+0x74b/0xb00 ffff88004117f930
[…] ? netlink_attachskb+0xb20/0xb20 ffff88004117f980
[…] ? __check_object_size+0x3e/0xaa0 ffff88004117f998
[…] ? security_netlink_send+0x51/0x160 ffff88004117f9c8
[…] netlink_sendmsg+0xa03/0x1200 ffff88004117f9f8
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fa70
[…] ? netlink_unicast+0xb00/0xb00 ffff88004117fac8
[…] ? ____sys_sendmsg+0xe2a/0x1040 ffff88004117faf8
[…] ____sys_sendmsg+0xe2a/0x1040 ffff88004117fb00
[…] ? kernel_recvmsg+0x300/0x300 ffff88004117fb60
[…] ? reacquire_held_locks+0xe9/0x260 ffff88004117fbc8
[…] ___sys_sendmsg+0x138/0x200 ffff88004117fbf8
[…] ? do_recvmmsg+0x7e0/0x7e0 ffff88004117fc30
[…] ? lockdep_hardirqs_on_prepare+0x101/0x1e0 ffff88004117fc50
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd20
[…] ? lock_acquire+0x16f/0x320 ffff88004117fd58
[…] ? find_held_lock+0x3b/0xe0 ffff88004117fd70
[…] __sys_sendmsg+0x17a/0x260 ffff88004117fdc8
[…] ? __sys_sendmsg_sock+0x80/0x80 ffff88004117fdf0
[…] ? syscall_trace_enter+0x15e/0x2c0 ffff88004117fe98
[…] do_syscall_64+0x7d/0x400 ffff88004117fec8
[…] entry_SYSCALL_64_safe_stack+0x4a/0x60 ffff88004117fef8
</TASK>
==================================================================
The out-of-bounds report, though, is a red herring as it is f
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: fib: Don't ignore error route in local/main tables.
When CONFIG_IP_MULTIPLE_TABLES is enabled but no rule is added,
fib_lookup() performs route lookup directly on two tables.
Since the first lookup does not properly bail out, the result
of an error route in the merged local/main table could be
overwritten by another route in the default table:
# unshare -n
# ip link set lo up
# ip route add 192.168.0.0/24 dev lo table 253
# ip route add unreachable 192.168.0.0/24
# ip route get 192.168.0.1
192.168.0.1 dev lo table default uid 0
cache <local>
Once a random rule is added, the error route is respected:
# ip rule add table 0
# ip rule del table 0
# ip route get 192.168.0.1
RTNETLINK answers: No route to host
Let's fix the inconsistent behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: fix order of kfree_rcu() and rcu_assign_pointer()
Sashiko pointed out that kfree_rcu() was called before
rcu_assign_pointer() in handling the comment extension.
Fix the order so that rcu_assign_pointer() called first. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid1: fix writes_pending and barrier reference leaks on write failures
raid1_make_request() acquires a writes_pending reference with
md_write_start() before calling raid1_write_request(). Several failure
paths in raid1_write_request() complete the bio and return without
reaching the normal write completion path, causing the corresponding
md_write_end() to be skipped.
Make raid1_write_request() return a status indicating whether the write
request was successfully queued. This allows raid1_make_request() to
call md_write_end() when raid1_write_request() fails.
Additionally, if wait_blocked_rdev() fails after wait_barrier()
succeeds, the associated barrier reference is not released.
Call allow_barrier() before returning from that path to keep the barrier
accounting balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: aa_label_alloc use aa_label_free on alloc failure
aa_label_alloc() allocates a secid before allocating or taking the label
proxy. If the later proxy step fails, the error path only freed the label
memory, leaking any resources initialized by aa_label_init().
Use aa_label_free() on the failure path so partially initialized labels
release their secid and other label resources before the backing memory is
freed. |
| Permission control vulnerability in the device key management module. Impact: Successful exploitation of this vulnerability may affect availability. |
| Null pointer dereference vulnerability in the browser module. Impact: Successful exploitation of this vulnerability may affect availability. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: flowtable: support IPIP tunnel with direct xmit
The combination of IPIP tunnel with direct xmit, eg. bridge device,
breaks because no dst_entry is provided to check the skb headroom and to
set the iph->frag_off field. This leads to invalid dst usage and can
trigger a crash in the tunnel transmit path.
Fix this by moving dst_cache and dst_cookie out of the runtime union so
that they can be shared by neighbour, xfrm, and direct tunnel flows.
For FLOW_OFFLOAD_XMIT_DIRECT tuples carrying tunnel metadata, preserve
route state in these shared fields and release it through the common
dst release path.
Since dst_entry is now available to the three supported xmit modes and
dst_release() already deals with NULL dst, remove the xmit type check
in nft_flow_dst_release(). Moreover, skip the check if the dst entry
is NULL in nf_flow_dst_check() which is now the case for the direct
xmit case.
Based on patch from Rein Wei <n05ec@lzu.edu.cn>. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_fib: reject fib expression on the netdev egress hook
A fib expression in a netdev egress base chain dereferences nft_in(pkt),
NULL on the transmit path, causing a NULL pointer dereference at eval.
nft_fib_validate() masks the hook with NF_INET_* values, but netdev hook
numbers are a separate enum that aliases them (NF_NETDEV_EGRESS ==
NF_INET_LOCAL_IN), so an egress chain passes validation and then faults.
Add nft_fib_netdev_validate() that limits each result/flag to the netdev
hook where the device it reads exists: the input-device cases (OIF,
OIFNAME, ADDRTYPE with F_IIF) to ingress, the output-device case (ADDRTYPE
with F_OIF) to egress, ADDRTYPE with no device flag to both. Also restrict
nft_fib_validate() to NFPROTO_IPV4/IPV6/INET so its NF_INET_* masks are
not applied to another family's hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: prevent invalid cursor access for purged BOs
During a page table walk for binding, xe_pt_stage_bind() explicitly
skips initializing the xe_res_cursor for purged BOs, treating them
similarly to NULL VMAs by only setting the cursor size.
However, xe_pt_hugepte_possible() and xe_pt_scan_64K() did not check
if the BO was purged before attempting to walk the cursor using
xe_res_dma() and xe_res_next(). Because the cursor was left
uninitialized for purged BOs, this falls through and triggers
warnings like:
WARNING: drivers/gpu/drm/xe/xe_res_cursor.h:274 at xe_res_next
Fix this by explicitly checking if the BO is purged in both
xe_pt_hugepte_possible() and xe_pt_scan_64K(), returning early just
as we do for NULL VMAs, avoiding the invalid cursor accesses entirely.
As a precaution, also zero-initialize the cursor in xe_pt_stage_bind()
to ensure we don't pass garbage data into the page table walkers
if we ever hit a similar edge case in the future.
(cherry picked from commit 4c7b9c6ece32440e5a435a92076d049450cd2d2e) |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: add INIT verification after cookie unpacking
In SCTP handshake, the INIT chunk is initially processed by the server
and embedded into the cookie carried in INIT-ACK. The client then
returns this cookie via COOKIE-ECHO, where the server unpacks it and
reconstructs the original INIT chunk.
When cookie authentication is enabled, the cookie contents are protected
against tampering, so reusing the unpacked INIT without re-verification
is safe.
However, when cookie authentication is disabled, the reconstructed INIT
can no longer be trusted. In this case, the INIT must be explicitly
validated after unpacking to avoid processing potentially tampered data.
Add sctp_verify_init() checks after cookie unpacking in COOKIE-ECHO
processing paths (sctp_sf_do_5_1D_ce() and sctp_sf_do_5_2_4_dupcook())
when cookie_auth_enable is disabled. On failure, the new association is
freed and the packet is discarded.
Also tighten cookie validation in sctp_unpack_cookie() by verifying the
embedded chunk type is SCTP_CID_INIT before treating it as an INIT
chunk.
Finally, update sctp_verify_init() to validate parameter bounds using
the actual embedded INIT length instead of chunk->chunk_end, since the
INIT stored in COOKIE-ECHO may not span the entire chunk buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: validate SRH length before reading fixed fields
seg6_validate_srh() reads fixed SRH fields such as srh->type and
srh->hdrlen before checking that the supplied length covers the fixed
struct ipv6_sr_hdr fields.
The BPF SEG6 encap path reaches this with a BPF program-supplied pointer
and length: bpf_lwt_push_encap() and the SEG6 local BPF END_B6 and
END_B6_ENCAP actions call bpf_push_seg6_encap(), which forwards the
length to seg6_validate_srh() with no minimum-size guard. A 2-byte SEG6
encap header can therefore make the validator read srh->type at offset 2
beyond the caller-supplied buffer.
Reject lengths shorter than the fixed SRH at the top of
seg6_validate_srh(), before any field is read. This fixes the BPF helper
path and keeps the common validator robust. |
| A security flaw has been discovered in GL.iNet A1300, AX1800, AXT1800, BE1400, BE3600, BE6500, BE9300, BE10000, E5800, MT2500, MT3000, MT3600BE, MT5000, MT6000, X2000, X3000 and XE3000 up to 4.8.x. Affected by this issue is the function ui.update_langs of the component Language Update. Performing a manipulation of the argument hour/min/week results in code injection. The attack can be initiated remotely. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A flaw was found in GLib. The D-Bus client-side implementation of the DBUS_COOKIE_SHA1 SASL authentication mechanism does not validate the cookie_context parameter received from the server. A malicious D-Bus server can supply a cookie_context containing path traversal sequences, causing the client to read an arbitrary file and exfiltrate sensitive data by verifying guessed file contents against a generated hash. |
