| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients that negotiate RDPGFX AVC444 with an H.264 decoder backend calculate the intermediate YUV444 allocation size in libfreerdp/codec/h264.c with 32-bit multiplication in avc444_ensure_buffer. A malicious RDP server can supply surface dimensions for which piDstStride multiplied by padDstHeight wraps to a small nonzero value, causing winpr_aligned_recalloc to allocate an undersized buffer before YUV420CombineToYUV444 writes using the actual stride and rectangle dimensions. This can cause a client crash and may permit code execution through attacker-influenced heap corruption. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, the glyph_cache_get function in libfreerdp/cache/glyph.c checks whether index is greater than cache->number instead of greater than or equal to it. A malicious RDP server can use GLYPH_FRAGMENT_USE replay in update_process_glyph_fragments to make the default cache receive index 254 when cache->number is 254, reading one pointer beyond the entries array and dereferencing it as a glyph. This can crash the client and may disclose adjacent heap data. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP clients using TS Gateway accept a server-controlled max_xmit_frag value in libfreerdp/core/gateway/rpc_bind.c without bounding it to the 4088-byte ReceiveFragment allocation. A malicious gateway can advertise 65535 and then send a response fragment of the same length, causing rpc_channel_read in libfreerdp/core/gateway/rpc.c to write up to 65535 bytes into the smaller ReceiveFragment buffer. This can crash the client and may permit code execution through attacker-controlled heap corruption. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, freerdp_image_copy_from_icon_data in libfreerdp/codec/color.c calculates nWidth multiplied by nHeight multiplied by FreeRDPGetBytesPerPixel(format) in 32-bit arithmetic. A malicious RDP server can send a RAIL TS_ICON_INFO update with dimensions such as 32768 by 32768 and 32 bits per pixel so the required-size calculation wraps, bypassing the cbBitsColor source bounds check before freerdp_image_copy_no_overlap reads attacker-controlled icon data. This affects RemoteApp clients using the vulnerable library path, while xfreerdp has a caller-side mitigation. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, rpc_client_recv_fragment in libfreerdp/core/gateway/rpc_client.c ensures the response reassembly stream capacity using only the server-declared alloc_hint rather than the actual StubLength about to be written. A malicious TS Gateway can send a PTYPE_RESPONSE with a small alloc_hint and a much larger frag_length, causing Stream_Write to copy attacker-controlled stub data beyond the 4096-byte pdu->s buffer. This can crash the client and may permit code execution through heap corruption. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.27.0, FreeRDP H.264 decoder backends can return YUV planes sized from the bitstream without comparing the decoded width and height to the RDPGFX surface dimensions used to validate region rectangles. A malicious RDP server can provide an AVC420 or AVC444 bitstream whose decoded frame is smaller than the negotiated surface, causing yuv420_context_decode and the YUV-to-RGB conversion paths to read beyond the decoder-owned planes in libfreerdp/codec/h264.c and the selected H.264 backend. This can disclose client memory or crash the client. This issue is fixed in version 3.27.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, an authenticated RDP client can advertise DVI ADPCM with nBlockAlign equal to 8 and nChannels equal to 2 to make the `bs` calculation in rdpsnd_server_select_format in channels/rdpsnd/server/rdpsnd_main.c equal zero. The subsequent out_frames modulo `bs` operation raises SIGFPE and terminates the server-side rdpsnd channel process. This vulnerability fixed in 3.28.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, rdpsnd_server_recv_formats in channels/rdpsnd/server/rdpsnd_main.c frees context->client_formats on a malformed Client Audio Formats PDU without clearing the owning pointer or num_client_formats. An authenticated RDP client can trigger an error such as a cbSize larger than the remaining record, leave the dangling pointer in the server context, and cause rdpsnd_server_context_free to free the same allocation again at session teardown. This reliably terminates the server and can create allocator-dependent heap corruption. This issue is fixed in version 3.28.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.28.0, freerdp_dsp_decode_opus in libfreerdp/codec/dsp.c calls Stream_EnsureRemainingCapacity on context->common.buffer even though opus_decode writes decoded PCM into the caller-supplied out stream. A malicious RDP server that negotiates WAVE_FORMAT_OPUS with a client built with WITH_OPUS enabled and WITH_DSP_FFMPEG disabled can make libopus write a large decoded frame beyond the 4096-byte StreamPool_Take destination used by channels/rdpsnd/client/rdpsnd_main.c. This can corrupt the client heap, crash the client, and may permit code execution. This issue is fixed in version 3.28.0. |
| FreeRDP is a free implementation of the Remote Desktop Protocol. Prior to 3.29.0, planar_decompress_plane_rle and planar_decompress_plane_rle_only in libfreerdp/codec/planar.c verify that a control byte exists but do not verify that the source buffer contains the zero to fifteen raw bytes declared by that control byte. A malicious RDP server can send a truncated planar bitmap or surface update whose final control byte claims additional raw bytes, causing the decoder to read beyond pSrcData while processing a color plane. This can crash the client and may disclose adjacent memory. This issue is fixed in version 3.29.0. |
| Snipe-IT is an IT asset/license management system. Prior to 8.6.1, POST /two-factor has no rate limiting, lockout, or attempt counter, allowing an attacker with valid credentials to submit unlimited TOTP guesses against the three accepted codes created by config/google2fa.php window=1. A successful guess creates a fully authenticated session. When two_factor_enabled is 1, POST /account/profile with two_factor_optin=0 can disable two-factor authentication without OTP reverification, while required mode 2 prevents that opt-out. An administrator can also use POST /api/v1/users/two_factor_reset to clear another user's secret. This issue is fixed in version 8.6.1. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to obtain sensitive information due to an out-of-bounds read. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 is affected by a vulnerability in the PowerVM hypervisor call interface. An attacker with root access to a guest partition can issue a specially crafted hypervisor call causing a virtual processor to become permanently unresponsive, requiring a full platform re-IPL to restore normal operation. In some cases this may also cause the guest to inject a small amount of data into hypervisor or partition memory with no attacker control over the target location. Successful exploitation results in an integrity and availability impact to the managed system. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary commands due to improper neutralization of special elements used in an OS command. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote authenticated attacker to execute arbitrary code due to a stack-based buffer overflow. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to execute arbitrary commands due to shell metacharacter injection. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to obtain root privileges due to improper enforcement of RBAC authentication roles. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a local attacker to achieve local privilege escalation due to an out-of-bounds write. |
| IBM PowerVM Hypervisor FW1120.00, FW1110.00 through FW1110.30, FW1060.00 through FW1060.80, and FW950.00 through FW950.H2 Power Systems Firmware is affected by a vulnerability in partition firmware during network boot. An unauthenticated attacker on the same network as a partition undergoing network boot can send a malformed packet, allowing arbitrary code to be executed in the partition firmware and compromising everything subsequently loaded by that partition. Other partitions and the managed system are not affected. Only partitions actively performing a network boot are affected, resulting in a confidentiality, integrity, and availability impact. |
| IBM AIX 7.2, and 7.3 and IBM PowerVM VIOS 4.1 could allow a remote attacker to execute arbitrary code due to a stack-based buffer overflow. |
