| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a local authenticated attacker to obtain unauthorized access to files due to a time-of-check time-of-use (TOCTOU) race condition. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_inner: release local_lock before re-enabling softirqs
Quoting sashiko:
In the error path, local_bh_enable() is called before
local_unlock_nested_bh(). |
| In the Linux kernel, the following vulnerability has been resolved:
iommupt: Check for missing PAGE_SIZE in the pgsize_bitmap
Sashiko pointed out that the driver could drop PAGE_SIZE from the
pgsize_bitmap. That is technically allowed but nothing does it, and
such an iommu_domain would not be used with the DMA API today.
Still, it is against the design and it is trivial to fix up. Lift
the PT_WARN_ON to the if branch and just skip the fast path. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu: Handle unmap error when iommu_debug is enabled
Sashiko noticed a latent bug where the map error flow called iommu_unmap()
which calls iommu_debug_unmap_begin()/iommu_debug_unmap_end() however
since this is an error path the map flow never actually established the
original iommu_debug_map() it will malfunction.
Lift the unmap error handling into iommu_map_nosync() and reorder it so
the trace_map()/iommu_debug_map() records the partial mapping and then
immediately unmaps it. This avoid creating the unbalanced tracking and
provides saner tracing instead of a unmap unmatched to any map. |
| The Smash Balloon Social Post Feed – Simple Social Feeds for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'id' Shortcode Attribute in all versions up to, and including, 4.9.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/msm: Fix iommu_map_sgtable() return value check and avoid WARN
Commit "iommu: return full error code from iommu_map_sg[_atomic]()"
changed iommu_map_sgtable() to return an ssize_t and negative values
in error cases, rather than a size_t and a zero.
Store the return value in the appropriate type and in case of error,
return it rather than WARNing.
Patchwork: https://patchwork.freedesktop.org/patch/719685/ |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to obtain sensitive information due to an out-of-bounds read. |
| Path Traversal in Gateway in Mirasys DVMS Workstation 5.12.6 and earlier allows an attacker to traverse the file system to access files or directories via the Web Client webserver. |
| The ShortPixel Adaptive Images – WebP, AVIF, CDN, Image Optimization plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.11.5. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to modify configuration options of third-party plugins including ShortPixel Image Optimizer, Autoptimize, WP Rocket, Imagify, and LiteSpeed Cache, as well as the plugin's own API key and account binding. Exploitation requires the respective third-party plugins to be installed, as the impact against those plugins' settings is only reachable when those plugins are present. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to obtain sensitive information due to an out-of-bounds read. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to execute arbitrary code due to an untrusted search path. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/virt/sev: Revert "Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN"
Revert
99cf1fb58e68 ("x86/virt/sev: Drop WBINVD before setting MSR_AMD64_SYSCFG_SNP_EN").
Section 8.8 of the SNP spec says:
Before invoking SNP_INIT_EX with INIT_RMP set to 1, software must ensure
that no CPUs contain dirty cache lines for the memory containing the RMP.
Cachelines can be moved from cache to cache in a dirty state. The
wbinvd_on_all_cpus() before SNP_INIT_EX flushes the caches for each CPU, but
if the IPIs for WBINVD race with this dirty cacheline movement, it is possible
that they may not get flushed, violating the firmware requirement.
Doing wbinvd_on_all_cpus() before setting SNPEn is safer since the RMP
table is not yet in use.
[ Heroically bisected by Srikanth. ]
[ bp: Massage commit message. ] |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: pin bridge device while NFQUEUE holds fake dst
The br_netfilter fake rtable is embedded in struct net_bridge and is
attached to bridged packets with skb_dst_set_noref(). If such a packet is
queued to NFQUEUE, __nf_queue() upgrades that fake dst with
skb_dst_force().
At that point the queued skb can hold a real dst reference after bridge
teardown has started. The problem is not that every bridged packet needs
its own dst reference. The problem is that NFQUEUE can keep the bridge
private fake dst alive after unregister begins.
Fix this by keeping the bridge fake dst model unchanged and pinning the
bridge master device only while the packet sits in NFQUEUE. Record the
bridge device in nf_queue_entry when the queued skb carries a bridge fake
dst, take a device reference for the queue lifetime, and drop it when the
queue entry is freed.
Also make sure queued entries are reaped when that bridge device goes
down, and drop the redundant nf_bridge_info_exists() test from the fake
dst detection.
This keeps netdev_priv(br->dev) alive until verdict completion, so the
embedded fake rtable and its metrics backing storage cannot be freed out
from under dst_release(). It also avoids the constant refcount bump and
avoids using ipv4-specific dst helpers for IPv6 bridge traffic. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc3-control: Fix heap overflow in bytes_ext put/get
The ipc_control_data buffer is allocated as kzalloc(max_size), where
max_size covers the entire struct sof_ipc_ctrl_data including its
flexible array payload. However, the bounds checks in bytes_ext_put
and _bytes_ext_get compared user data lengths against max_size
directly, ignoring that cdata->data sits at an offset of
sizeof(struct sof_ipc_ctrl_data) bytes into the allocation.
This allowed writing up to sizeof(struct sof_ipc_ctrl_data) bytes past
the end of the heap buffer from unprivileged userspace via the ALSA TLV
kcontrol interface, and similarly allowed over-reading adjacent heap
data on the get path.
Fix all bounds checks to subtract sizeof(*cdata) from max_size so they
reflect the actual space available at the cdata->data offset. Also fix
the error-path restore in bytes_ext_put which wrote to cdata->data
instead of cdata, causing the same overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Move kvm_io_bus_get_dev() locking responsibilities to callers
kvm_io_bus_get_dev() returns a device that is only matched by the
address, and nothing else. This can cause a lifetime issue if
the matched device is not the expected type, as by the time
the caller can introspect the object, it might be gone (the srcu
lock having been dropped).
Given that there is only a single user of this helper, the simplest
option is to move the locking responsibility to the caller, which
can keep the srcu lock held for as long as it wants.
Note that this aligns with other kvm_io_bus*() helpers, which
already require the srcu lock to be held by the callers. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Ignore pending PV EOI if the vCPU has since disabled PV EOIs
Ignore KVM's internal "service pending PV EOI" request if the vCPU has
disabled PV EOIs since the request was made. Asserting that PV EOIs are
enabled can fail if reading guest memory in pv_eoi_get_user() fails, i.e.
if pv_eoi_test_and_clr_pending() bails early, *and* the vCPU also disables
PV EOIs.
kernel BUG at arch/x86/kvm/lapic.c:3338!
Oops: invalid opcode: 0000 [#1] SMP
CPU: 4 UID: 1000 PID: 890 Comm: pv_eoi_test Not tainted 7.0.0-d585aa5894d8-vm #337 PREEMPT
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:kvm_lapic_sync_from_vapic+0x12b/0x140 [kvm]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl_run+0x1075/0x1c30 [kvm]
kvm_vcpu_ioctl+0x2d5/0x980 [kvm]
__x64_sys_ioctl+0x8a/0xd0
do_syscall_64+0xb5/0xb40
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
Modules linked in: kvm_intel kvm irqbypass
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: validate selector family and prefixlen during match
syzbot reported a shift-out-of-bounds in xfrm_selector_match()
due to AF_UNSPEC selector with large prefixlen (e.g. 128) matched
against IPv4 flow (when XFRM_STATE_AF_UNSPEC is set).
Fix this by:
- Rejecting mismatched families in xfrm_selector_match.
- Returning false in addr4_match if prefixlen > 32.
- Returning false in addr_match if prefixlen > 128 (prevents overflow). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: clear CRTC color blob pointers after dropping refs
intel_crtc_put_color_blobs() drops the CRTC color blob references, but
leaves the corresponding pointers unchanged.
This can matter in intel_crtc_prepare_cleared_state(), which frees the
old CRTC hw state before calling intel_dp_tunnel_atomic_clear_stream_bw().
The latter can fail while looking up the DP tunnel group state, for
example with -EDEADLK.
If that happens, the function returns without completing the cleared
state preparation. The failed atomic state will then be cleared by the
atomic core and intel_crtc_free_hw_state() can be called again for the
same state, dropping the same blob references again.
Clear the blob pointers after dropping the references so repeated cleanup
of the same CRTC hw state is safe.
(cherry picked from commit d5005addb5f68e8a0edce249506757bdc9e3d8c8) |
