| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/mmiotrace: Add NULL check for mmio_trace_array in logging functions
mmio_trace_rw() and mmio_trace_mapping() retrieve mmio_trace_array into
tr and pass it to __trace_mmiotrace_rw() and __trace_mmiotrace_map().
If these functions are invoked while mmio_trace_array is NULL (e.g. before
initialization or after disabled), accessing tr->array_buffer.buffer will
result in a NULL pointer dereference crash.
Fix this by adding an explicit NULL check for tr at the beginning of
__trace_mmiotrace_rw() and __trace_mmiotrace_map(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: account for fraggap on the paged allocation path
In __ip6_append_data(), when the paged-allocation branch is taken
(MSG_MORE / NETIF_F_SG / large fraglen), alloclen and pagedlen are
computed as
alloclen = fragheaderlen + transhdrlen;
pagedlen = datalen - transhdrlen;
datalen already includes fraggap (datalen = length + fraggap). When
fraggap is non-zero, this is not the first skb and transhdrlen is zero.
The fraggap bytes carried over from the previous skb are copied just past
the fragment headers in the new skb's linear area. The linear area is
therefore undersized by fraggap bytes while pagedlen is overstated by the
same amount, and the copy writes past skb->end into the trailing
skb_shared_info.
An unprivileged user can trigger this via a UDPv6 socket using
MSG_MORE together with MSG_SPLICE_PAGES.
The bad accounting was introduced by commit 773ba4fe9104 ("ipv6:
avoid partial copy for zc"). Before commit ce650a166335 ("udp6: Fix
__ip6_append_data()'s handling of MSG_SPLICE_PAGES"), the negative
copy value caused -EINVAL to be returned. That later commit allowed
MSG_SPLICE_PAGES to proceed in this case, making the corruption
triggerable.
The non-paged branch sets alloclen to fraglen, which already accounts
for fraggap because datalen does. Bring the paged branch in line by
adding fraggap to alloclen and subtracting it from pagedlen.
After this adjustment, copy no longer collapses to -fraggap on the
paged path, so remove the stale comment describing that old arithmetic.
Since a negative copy is no longer expected for a valid MSG_SPLICE_PAGES
case, remove the MSG_SPLICE_PAGES exception from the negative copy check. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: Fix NULL pointer dereference in mt7996_init_tx_queues()
When MT76_NPU and CONFIG_NET_MEDIATEK_SOC_WED are enabled and
mt76 detects properly the Airoha NPU SoC, mt7996_init_tx_queues() will
dereference a NULL WED pointer.
Fix the issue by always passing the WED pointer from mt7996_dma_init(). |
| In the Linux kernel, the following vulnerability has been resolved:
soc: xilinx: Fix race condition in event registration
The zynqmp_power driver registers handlers for suspend and subsystem
restart events using register_event(). However, the work structures
(zynqmp_pm_init_suspend_work and zynqmp_pm_init_restart_work) used by
these handlers were allocated and initialized after the registration
call.
This created a race window where, if the firmware triggered an event
immediately after registration but before allocation, the callback
(suspend_event_callback or subsystem_restart_event_callback) would
dereference a NULL pointer in work_pending(), leading to a crash.
Fix this by allocating and initializing the work structures before
registering the events. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: ims-pcu - add response length checks
The driver processes response data from device buffers without verifying
that the device actually sent enough data. This can lead to
out-of-bounds reads or processing stale data.
Add checks for the expected response length before accessing the
buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL
dsm_create() initially checks pdev->bus when computing segment_id:
u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0;
But the next two lines unconditionally dereference pdev->bus via
pcie_find_root_port() and especially pci_dev_id(pdev), which expands
to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact
NULL, segment_id is initialised to 0 but the very next statement
crashes the kernel.
smatch flags this:
drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we
previously assumed 'pdev->bus' could be null (see line 251)
Make the NULL handling consistent: if pdev->bus is NULL the device
has no PCI context to work with and SEV TIO setup cannot proceed,
so return -ENODEV before any of the bus-dependent lookups. The
remaining initialisation now runs only on the path where pdev->bus
is known to be valid.
No change for callers where pdev->bus is non-NULL, which is the
only case where dsm_create() did meaningful work before this change. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer
The management mailbox channel cleanup helpers can be called from
error handling paths when mgmt_chann has already been destroyed.
Add NULL checks to xdna_mailbox_free_channel() and
xdna_mailbox_stop_channel() so the cleanup path safely returns instead
of dereferencing a NULL mailbox channel pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
mtd: maps: vmu-flash: fix NULL pointer dereference in initialization
The mtd_info contains a struct device, which must be linked to its
parent. Without this, the initialization of the MTD fails with a NULL
pointer dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns()
It's pointless to call WARN_ON() in case of an allocation failure in
dev_change_net_namespace() and device_rename(), since it only leads to
useless splats caused by deliberate fault injections, so avoid it.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "PCI/MSI: Unmap MSI-X region on error"
This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202.
Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an
iounmap(dev->msix_base) on the error path of msix_capability_init() to
release the MSI-X region when msix_setup_interrupts() fails.
When msix_setup_interrupts() fails, the call chain is:
msix_setup_interrupts()
-> __msix_setup_interrupts()
struct pci_dev *dev __free(free_msi_irqs) = __dev;
...
return ret; // __free cleanup fires on error
The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which
already handles the unmap:
void pci_free_msi_irqs(struct pci_dev *dev)
{
pci_msi_teardown_msi_irqs(dev);
if (dev->msix_base) {
iounmap(dev->msix_base); // already unmapped here
dev->msix_base = NULL; // and set to NULL
}
}
So dev->msix_base is unmapped and set to NULL before
msix_setup_interrupts() returns to msix_capability_init(). The
"goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap
MSI-X region on error") then calls iounmap() a second time on a NULL
pointer.
This was reproduced on Intel Emerald Rapids (192 CPUs) while
running tools/testing/selftests/kexec/test_kexec_jump.sh:
WARNING: CPU#44 at iounmap+0x2a/0xe0
RIP: 0010:iounmap+0x2a/0xe0
RDI: 0000000000000000
Call Trace:
msix_capability_init+0x317/0x3f0
__pci_enable_msix_range+0x21d/0x2c0
pci_alloc_irq_vectors_affinity+0xa9/0x130
nvme_setup_io_queues+0x2a8/0x420 [nvme]
nvme_reset_work+0x151/0x340 [nvme]
...
RDI=0 confirms iounmap() is called with NULL.
Restore the original "goto out_disable" and leave the unmap to the
existing __free(free_msi_irqs) cleanup. |
| Uncontrolled Recursion vulnerability in the Elixir standard library allows an attacker who controls a list passed to inspect/1, List.to_string/1, or List.to_charlist/1 to exhaust a BEAM node's memory.
Inspect.List's charlist branch in lib/elixir/lib/inspect.ex classifies a list as a charlist using List.ascii_printable?/2, which examines only the first :printable_limit (4096 by default) elements, and then calls IO.chardata_to_string/1 on the whole term. A list whose printable prefix exceeds that limit but which contains a later element that is not a code point (an atom, an out-of-range integer, or an improper tail) is therefore mis-classified, and the conversion raises ArgumentError. That conversion runs inside List.to_string/1, whose rescue clause builds its message by interpolating inspect(list), which re-enters the same branch and raises again. The nested inspection is an argument to raise, so the recursion is not in tail position and every level is retained: the process stack grows monotonically while each cycle re-walks the list, until the process is killed by max_heap_size or, by default, the node runs out of memory. List.to_charlist/1 has the same rescue shape.
Below the printable limit the inner inspect/1 sees the invalid element within its counter and renders the list in ordinary bracket form, so a single ArgumentError is raised and no recursion occurs.
This issue affects elixir: from 1.15.0-rc.0 before 1.18.5, from 1.19.0-rc.0 before 1.19.6, and from 1.20.0-rc.0 before 1.20.4. |
| gitoxide versions from 0.25.4 contain an HTTP credential leak vulnerability in the curl-based transport backend where credentials are sent to attacker-controlled servers after HTTP redirects. The vulnerability occurs because credential validation checks the original URL instead of the effective URL after redirect, allowing attackers to steal authentication tokens through cross-domain redirects or HTTPS-to-HTTP downgrades. |
| gitoxide gix-packetline versions before 0.21.5 contain a panic vulnerability in the TextRef implementation that occurs when processing side-band packet lines with empty payloads. A malicious Git server can send a crafted side-band packet to trigger an index out of bounds panic, aborting the client process during fetch operations without authentication. |
| filebrowser through 2.63.23 fails to validate named pipes in directory archive and public download handlers, allowing attackers to trigger blocking open syscalls. Authenticated users or anonymous visitors with public share links can repeatedly request archives containing named pipes to pin server goroutines and exhaust connection resources. |
| A missing input-validation issue in MongoDB libmongocrypt's automatic-encryption context setup allows a caller-supplied database identifier to be accepted without sanitization. The resulting impact is limited to incorrect schema selection, which may lead to limited disclosure or modification of information handled by the application. |
| The wpForo Forum plugin for WordPress is vulnerable to SQL Injection via the 'referer' parameter in all versions up to, and including, 2.4.17. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vfio_ccw: Cancel existing workqueues
The initialization of the io_work and crw_work workqueues begs the
question of whether they should be un-initialized. Add the corresponding
cleanup tags in _release_dev to ensure work isn't dispatched after
the private struct is free'd. |
| In the Linux kernel, the following vulnerability has been resolved:
mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition
In atmci_probe, &host->bh_work is bound with atmci_work_func, and
atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all
queue this work on system_bh_wq.
If we remove the module, atmci_remove makes cleanup and the memory
allocated for host with devm_kzalloc() is released after the remove
callback returns, while the work mentioned above may still be pending
or running. The sequence of operations that may lead to a UAF bug is
as follows:
CPU0 CPU1
| atmci_interrupt
| queue_work(system_bh_wq,
| &host->bh_work)
atmci_remove |
atmci_cleanup_slot(...) |
atmci_writel(host, ATMCI_IDR, ~0UL) |
timer_delete_sync(&host->timer) |
dma_release_channel(host->dma.chan) |
free_irq(platform_get_irq(pdev, 0), host) |
| atmci_work_func
| // use host
// devm resources released after |
// remove returns, host is freed |
| // use host (use-after-free)
Fix it by canceling the work after all the sources that can schedule
it (IRQ handler, timeout timer and DMA completion callback) have been
stopped, and before proceeding with the remaining cleanup in
atmci_remove. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: fix OOB read in decode_watchers() via missing bounds check
ceph_start_decoding() validates that struct_len bytes remain in the
buffer after the encoding header, but accepts struct_len=0 as valid:
ceph_decode_need(p, end, 0, bad) always passes. When a malicious or
compromised OSD sends an obj_list_watch_response_t reply with
struct_len=0, ceph_start_decoding() returns success with p == end,
leaving zero bytes guaranteed for subsequent reads.
The immediately following ceph_decode_32(p) in decode_watchers() has
no preceding bounds check. With p == end this is a 4-byte read past
the validated buffer boundary. The garbage value is then passed
directly to kzalloc_objs() as the watcher count.
The sibling function decode_watcher() already uses the safe variants
(ceph_decode_copy_safe, ceph_decode_64_safe, ceph_decode_skip_32)
after its own ceph_start_decoding() call. decode_watchers() is the
only site that uses the bare variant, confirming an oversight.
Fix by replacing ceph_decode_32(p) with ceph_decode_32_safe(p, end,
*num_watchers, bad), consistent with the established pattern.
Attacker model: a malicious or compromised OSD in a multi-tenant Ceph
deployment (e.g. cloud) can trigger this against any kernel client
that calls CEPH_OSD_OP_LIST_WATCHERS, without any further privileges
beyond OSD session establishment.
[ idryomov: trim changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Avoid using invalid osd indices from primary_temp
A corrupted osdmap received from a Ceph monitor or OSD may contain osd
indices in its pg_temp, primary_temp, pg_upmap, and pg_upmap_items parts
that don't exist, i.e., that are greater than max_osd or smaller than
CEPH_HOMELESS_OSD (-1). These indices are used to create the up and
acting set in ceph_pg_to_up_acting_osds(), called from calc_target().
While most of these osd indices are checked, the one from primary_temp
is not. Subsequently, this may lead to calc_target() returning this
(potentially invalid) index as target osd for a (linger) request.
Because the osd_state, osd_weight, and osd_addr arrays only contain
max_osd entries (with indices 0 to max_osd -1), this leads to
out-of-bounds accesses when trying to read values from these arrays.
This patch fixes the issue by adding a check to get_temp_osds(), so that
only valid osd indices from primary_temp are used, and it falls back to
using the primary from pg_temp or the up set if it is invalid.
[ idryomov: changelog ] |
