Export limit exceeded: 370352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Export limit exceeded: 370352 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (370352 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-72069 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: locking/rt: Fix the incorrect RCU protection in rt_spin_unlock() rt_spin_unlock() releases the RCU protection before unlocking the lock. That opens the door for the following UAF scenario: T1 T2 spin_lock(&p->lock); rcu_read_lock(); invalidate(p); p = rcu_dereference(ptr); rcu_assign_pointer(ptr, NULL); if (!p) return; spin_unlock(&p->lock); spin_lock(&p->lock) lock(&lock->lock); rcu_read_lock(); kfree_rcu(p); rcu_read_unlock(); .... spin_unlock(&p->lock) rcu_read_unlock(); // Ends grace period rcu_do_batch() kfree(p); UAF -> rt_mutex_cmpxchg_release(&lock->lock...) Regular spinlocks keep preemption disabled accross the unlock operation, which provides full RCU protection, but the RT substitution fails to resemble that. Same applies for the rwlock substitution. Move the rcu_read_unlock() invocation past the unlock operations to match the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but that's harmless as the caller needs to hold RCU read lock across the lock operation. The migrate_enable() call stays before the unlock operation because there is no per CPU operation in the unlock path which would require migration to be kept disabled. | ||||
| CVE-2026-72084 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: scsi: target: Bound PR-OUT TransportID parsing to the received buffer core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move() hand the raw PERSISTENT RESERVE OUT parameter buffer to target_parse_pr_out_transport_id() without telling it how many bytes are valid. For an iSCSI TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with an unbounded strstr() (and on the error path prints the name with a further unbounded "%s"). An initiator can submit a TransportID whose iSCSI name contains neither a ",i,0x" substring nor a NUL terminator, filling the parameter list to its end, so the scan runs off the end of the buffer. When the parameter list spans more than one page the buffer is a multi-page vmap (transport_kmap_data_sg()), so the over-read walks into the trailing vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It is reachable by any fabric that delivers a PR OUT to a device exported through an iSCSI TPG, including a guest via vhost-scsi. Pass the number of received bytes down to the parser and validate the iSCSI TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up front: reject it if it is below the spc4r17 minimum or larger than the received buffer, then bound the separator search, the ISID walk and the name copy by that length. This is the length check the callers already perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len against tpdl, core_scsi3_emulate_register_and_move() validates it against data_length), moved ahead of the scan. Also drop the unbounded "%s" of the unterminated name. Add per-format explicit name-length checks before copying into i_str, rather than silently truncating with min_t: for FORMAT CODE 00b reject if the descriptor body (tid_len - 4 bytes) cannot fit in i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion (from &buf[4] up to the separator) cannot fit. Both checks make the bounds intent explicit at each format branch. While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x" separator sits at the very end of the descriptor: that leaves an empty ISID and points the returned port nexus pointer at buf + tid_len, one past the descriptor, which the registration code (__core_scsi3_locate_pr_reg(), __core_scsi3_alloc_registration()) then dereferences as the ISID string -- the same over-read of the parameter buffer for a malformed descriptor. | ||||
| CVE-2026-72098 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: dm-verity: fix buffer overflow in FEC calculation There's a buffer overflow in dm-verity-fec: if (neras && *neras <= v->fec->roots) fio->erasures[(*neras)++] = i; This allows *neras to reach roots + 1 (the post-increment pushes it past roots). This value is then passed as no_eras to decode_rs8(). Inside the RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator polynomial loop writes lambda[j] where j can reach nroots + 1 — one element past the end of lambda[] (which is sized nroots + 1, valid indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting the syndrome buffer. | ||||
| CVE-2026-72100 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dm-integrity: fix a bug if the bio is out of limits If dm_integrity_check_limits fails, the code would exit with DM_MAPIO_KILL. However, the range would be already locked at this point, and it wouldn't be unlocked, resulting in a deadlock. Let's move the limit check up, so that when it exits, no resources are leaked. | ||||
| CVE-2026-72110 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf,fork: wipe ->bpf_storage before bailouts that access it Currently, copy_process() can bail out to free_task() before p->bpf_storage has been initialized, with this call graph (shown here for the !CONFIG_MEMCG case): copy_process dup_task_struct arch_dup_task_struct [copies the entire task_struct, including ->bpf_storage member] [RLIMIT_NPROC check fails] delayed_free_task free_task bpf_task_storage_free rcu_dereference(task->bpf_storage) bpf_local_storage_destroy In this case, the nascent task's ->bpf_storage member that bpf_local_storage_destroy() operates on is a plain copy of the parent's ->bpf_storage pointer, not a real initialized pointer. This leads to badness (kernel hangs, UAF). This is reachable as long as the process calling fork() has been inserted into a task storage map. | ||||
| CVE-2026-72113 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: add missing device refcount for CAN filter removal sashiko-bot remarked a problem with a concurrent device unregistration in isotp.c which also is present in the bcm.c code. A former fix for raw.c commit c275a176e4b6 ("can: raw: add missing refcount for memory leak fix") introduced a netdevice_tracker which solves the issue for bcm.c too. bcm_release(), bcm_delete_rx_op() and bcm_notifier() relied on dev_get_by_index(ifindex) to re-find the device for an rx_op before unregistering its filter. If a concurrent NETDEV_UNREGISTER has already unlisted the device from the ifindex table, that lookup fails and can_rx_unregister() is silently skipped, leaving a stale CAN filter pointing at the soon-to-be-freed bcm_op/socket. Hold a netdev_hold()/netdev_put() tracked reference on op->rx_reg_dev from the moment the rx filter is registered in bcm_rx_setup() until it is unregistered in bcm_rx_unreg(), and use that reference directly in bcm_release() and bcm_delete_rx_op() instead of re-looking the device up by ifindex. | ||||
| CVE-2026-72119 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: bcm: extend bcm_tx_lock usage for data and timer updates Stage new CAN frame content for an existing tx op into a kmalloc()'d buffer and validate it there, mirroring the approach already used in bcm_rx_setup(). Only copy the validated data into op->frames while holding op->bcm_tx_lock, so bcm_can_tx() and bcm_tx_timeout_handler() can no longer observe a partially updated or unvalidated frame. Add a missing error path for memcpy_from_msg() when copying CAN frame data from userspace. Also move the kt_ival1/kt_ival2/ival1/ival2 updates in bcm_tx_setup() under op->bcm_tx_lock, and read kt_ival1/kt_ival2/count under the same lock in bcm_tx_set_expiry() and bcm_tx_timeout_handler(), closing the torn 64-bit ktime_t read on 32-bit platforms. | ||||
| CVE-2026-72124 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: can: isotp: serialize TX state transitions under so->rx_lock The TX state machine (so->tx.state) is driven from three contexts: sendmsg() claiming and progressing a transfer, the RX path consuming Flow Control/echo frames, and two hrtimers timing out a stalled transfer. Mixing a lock-free cmpxchg() claim in sendmsg() with hrtimer_cancel() calls made under so->rx_lock elsewhere left windows where a frame or timer callback could act on a state that had already moved on, corrupting an unrelated transfer. so->rx_lock now covers the full lifecycle of a TX claim: sendmsg() takes it to check so->tx.state is ISOTP_IDLE, switch it to ISOTP_SENDING, bump so->tx_gen and drain the previous transfer's timers - all as one critical section. isotp_rcv_fc()/isotp_rcv_cf() already run under this lock via isotp_rcv(), and isotp_rcv_echo() now takes it itself, so none of them can ever observe a transfer mid-claim. This also means a transfer can no longer be handed to sendmsg()'s cleanup paths (signal or send error) while another thread is concurrently claiming or finishing it, so those paths can cancel timers and reset the state unconditionally. isotp_release() claims the socket the same way, so a racing sendmsg() sees a consistent ISOTP_SHUTDOWN and skips arming its timer or sending. Only the hrtimer callbacks stay outside so->rx_lock, since they run under so->rx_lock's cancellation elsewhere and taking it themselves would deadlock. so->tx_gen lets them recognize whether the transfer they timed out is still the one currently active, so they don't report an error against a transfer that has since completed or been superseded. | ||||
| CVE-2026-72133 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: spi: uniphier: Fix completion initialization order before devm_request_irq() The driver calls devm_request_irq() before initializing the completion used by the interrupt handler. Because the interrupt may occur immediately after devm_request_irq(), the handler may execute before init_completion(). This may result in calling complete() on an uninitialized completion, causing undefined behavior. This has been observed with KASAN. Fix this by initializing the completion before registering the IRQ. | ||||
| CVE-2026-72144 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: platform/x86: dell-laptop: fix missing cleanups in init error path dell_init() initializes several resources after dell_setup_rfkill(), including the optional touchpad LED, keyboard backlight LED, battery hook, debugfs directory and dell-laptop notifier. If a later LED or backlight registration fails, the error path only tears down the battery hook and rfkill resources. This leaves the notifier, debugfs directory, keyboard backlight LED and optional touchpad LED registered after dell_init() returns an error. Add the missing cleanup calls before tearing down rfkill. | ||||
| CVE-2026-72148 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: dmaengine: dw-edma: Add spinlock to protect DONE_INT_MASK and ABORT_INT_MASK The DONE_INT_MASK and ABORT_INT_MASK registers are shared by all DMA channels, and modifying them requires a read-modify-write sequence. Because this operation is not atomic, concurrent calls to dw_edma_v0_core_start() can introduce race conditions if two channels update these registers simultaneously. Add a spinlock to serialize access to these registers and prevent race conditions. [den: update dw_edma.lock comment] | ||||
| CVE-2026-72151 | 1 Linux | 1 Linux Kernel | 2026-08-17 | 8.4 High |
| In the Linux kernel, the following vulnerability has been resolved: tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret() without installing a completion callback, discards both return values, and immediately frees the kpp_request via kpp_request_free(). When the resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE, keembay-ocs), either operation returns -EINPROGRESS and the deferred completion worker dereferences the freed request. The path fires automatically from the hwrng_fillfn kernel thread via tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session -> tpm_buf_append_salt on every entropy poll, without any userland action. Install crypto_req_done as the completion callback, wrap both KPP operations in crypto_wait_req(), and propagate errors to the caller. The wait is a no-op for synchronous backends. | ||||
| CVE-2026-75483 | 2026-08-17 | 3.3 Low | ||
| powerlevel10k fails to neutralize control characters in the package.json version field when rendering the package prompt segment. Attackers can inject raw escape bytes in the version string to emit arbitrary terminal control sequences on each prompt render when the shell enters affected directories. | ||||
| CVE-2026-75482 | 2026-08-17 | 7.5 High | ||
| SWE-agent's trajectory inspector (sweagent inspector), confirmed in v1.1.0, is an HTTP server that joins request paths to the trajectory directory in its /trajectory/ handler without rejecting parent-directory ('..') references, bypassing the built-in path sanitization. The server binds all interfaces (0.0.0.0), applies wildcard CORS, and requires no authentication. An unauthenticated network client (or a malicious web page via CORS) can use path traversal sequences to read files outside the intended directory. Because the read sink parses targets as trajectory JSON, disclosure is constrained to JSON files shaped like a trajectory, which can contain repository contents, command output, and secrets/API keys. | ||||
| CVE-2026-75480 | 1 Volcengine | 1 Openviking | 2026-08-17 | 6.5 Medium |
| OpenViking debug vector scroll and count endpoints apply only account-level scoping without user-level access controls, allowing authenticated users to read all co-tenant records. Attackers can query these endpoints to retrieve private memories, resources, skills, and secret material belonging to other users in the same account without administrative privileges. | ||||
| CVE-2026-75479 | 1 Jeecg | 1 Jimureport | 2026-08-17 | 7.5 High |
| JimuReport contains an authentication bypass vulnerability in the report folder template listing endpoint that allows unauthenticated attackers to enumerate all reports and retrieve share tokens. Attackers can use disclosed share tokens to access protected report endpoints and retrieve full report definitions including embedded SQL statements and live query data. | ||||
| CVE-2026-75111 | 2026-08-17 | 7.5 High | ||
| Evidently UI fails to properly validate the filename parameter in the dataset materialization endpoint, allowing unauthenticated attackers to read arbitrary files outside the workspace directory. Attackers can supply traversal sequences or absolute paths in the filename field to access system files, which are then materialized into datasets and retrieved through the download endpoint. | ||||
| CVE-2026-75110 | 2026-08-17 | 9.8 Critical | ||
| MemOS is a memory operating system for LLMs and AI agents. In deployments where authentication is enabled (AUTH_ENABLED=true) but the undocumented, defaultless INTERNAL_SERVICE_SECRET environment variable is unset, the is_internal_request() check in src/memos/api/middleware/auth.py fails open: os.getenv("INTERNAL_SERVICE_SECRET") returns None and a request omitting the X-Internal-Service header also yields None, so the comparison None == None evaluates true. The request is then treated as a trusted internal principal and granted scopes: ["all"]. As a result, an unauthenticated remote attacker can reach the admin API-key management endpoints to mint API keys for any user, enumerate keys, revoke keys, and generate a master key for persistent privileged access, as well as all data endpoints. | ||||
| CVE-2026-75109 | 2026-08-17 | 7.1 High | ||
| Determined fails to authorize requests on the generic task kill, pause, and unpause endpoints in the API handlers. Authenticated attackers can disrupt other users' workloads by terminating, pausing, or unpausing tasks they do not own. | ||||
| CVE-2026-75108 | 2026-08-17 | 5.4 Medium | ||
| Next Terminal fails to enforce per-asset authorization checks on the portal ping and wake-on-LAN endpoints, allowing any authenticated user to probe and wake assets they are not granted access to. Attackers can call these endpoints with arbitrary asset identifiers to retrieve asset information including display names, reachability status, connection timing, and network addresses, or trigger wake-on-LAN packets on unauthorized assets. | ||||