| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: misc: uss720: unregister parport on probe failure
uss720_probe() registers a parport before reading the 1284 register used
to detect unsupported Belkin F5U002 adapters. If get_1284_register()
fails, the error path drops the driver private data and the USB device
reference, but leaves the parport device registered.
Leaving the port registered is more than a private allocation leak:
parport_register_port() has already reserved a parport number and
registered the parport bus device, while pp->private_data still points at
the private data that the common error path is about to release.
Undo the pre-announce registration in the get_1284_register() failure
branch before jumping to the common private-data cleanup path. Clear
priv->pp first, matching the disconnect path and avoiding a stale pointer
in the private data.
This issue was identified during our ongoing static-analysis research while
reviewing kernel code. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: accel: bmc150: clamp the device-reported FIFO frame count
__bmc150_accel_fifo_flush() copies the number of samples the device
reports in its hardware FIFO into an on-stack buffer
u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
which is sized for at most BMC150_ACCEL_FIFO_LENGTH (32) samples. The
frame count is read from the FIFO_STATUS register and only masked to its
7 valid bits:
count = val & 0x7F;
so it can be 0..127. The only other limit applied to it is the optional
caller-supplied sample budget:
if (samples && count > samples)
count = samples;
which does not constrain count on the flush-all path (samples == 0), and
leaves it well above 32 whenever samples is larger. count samples are
then transferred into buffer[]:
bmc150_accel_fifo_transfer(data, (u8 *)buffer, count);
bmc150_accel_fifo_transfer() reads count * 6 bytes through regmap, so a
malfunctioning, malicious or counterfeit accelerometer (or an attacker
tampering with the I2C/SPI bus) that reports up to 127 frames writes up
to 762 bytes into the 192-byte buffer: a stack out-of-bounds write of up
to 570 bytes that clobbers the stack canary, saved registers and the
return address.
Clamp count to BMC150_ACCEL_FIFO_LENGTH, the number of samples buffer[]
is sized for, before the transfer, mirroring the watermark clamp already
done in bmc150_accel_set_watermark(). A well-formed flush reports at most
BMC150_ACCEL_FIFO_LENGTH frames, so legitimate devices are unaffected. |
| XMLRPC-C Library versions 1.07 through 1.67.01 are vulnerable to a reflected cross-site scripting (XSS) vulnerability in the error page component. |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to 0.23.0, MCP::Server::Transports::StdioTransport and MCP::Client::Stdio in the mcp gem use IO#gets without a byte limit, allowing a peer that sends data without a newline to exhaust process memory. This issue is fixed in version 0.23.0. |
| ImageMagick is free and open-source software used for editing and manipulating digital images. In versions prior to 7.1.2-26he, the `-concatenate` operation is missing policy checks, potentially resulting in both reading and writing to paths disallowed by the security policy. This issue has been fixed in version 7.1.2-26. |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to 0.23.0, MCP::Server::Transports::StreamableHTTPTransport in the mcp gem reads and parses an entire JSON-RPC POST body without a size limit, allowing an unauthenticated remote attacker to exhaust process memory. This issue is fixed in version 0.23.0. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 14.0 before 19.0.5, 19.1 before 19.1.3, and 19.2 before 19.2.1 that under certain conditions could have allowed an attacker to execute arbitrary JavaScript in another user's browser via a crafted URL, due to improper sanitization of user-controlled input. |
| GitLab has remediated an issue in GitLab EE affecting all versions from 19.1 before 19.1.3 and 19.2 before 19.2.1 that under certain conditions could have allowed an authenticated user to access information from unauthorized projects due to improper neutralization of untrusted content processed by the AI-assisted code review functionality. |
| GitLab has remediated an issue in GitLab CE/EE affecting all versions from 11.8 before 19.0.5, 19.1 before 19.1.3, and 19.2 before 19.2.1 that under certain conditions could have allowed an unauthenticated user to cause a denial of service due to insufficient resource throttling when processing merge request discussions. |
| Privilege escalation in Checkmk versions 2.5.0 before 2.5.0p9, 2.4.0 before 2.4.0p34, 2.3.0 before 2.3.0p49, and 2.2.0 (EOL) allows a local unprivileged user to execute arbitrary commands as root by starting a process crafted to look like a SAP HANA instance. Without an explicit database configuration, the mk_sap_hana agent plugin derives instance identifiers from the process list and uses them to build a command executed with elevated privileges (requires the plugin to run as root with RUNAS=agent). |
| Vitest is a testing framework powered by Vite. From 3.0.0 until 3.2.5, 4.1.8, and 5.0.0-beta.4, Vitest Browser Mode exposed a cdp() API that forwarded raw Chrome DevTools Protocol methods without being gated by allowWrite or allowExec, allowing a remote client with exposed browser API metadata to use CDP Page.setDownloadBehavior and Runtime.evaluate to overwrite vite.config.ts and execute attacker-controlled Node.js code. This issue is fixed in versions 3.2.5, 4.1.8, and 5.0.0-beta. |
| Joomla Extension - balbooa.com - Stored cross-site scripting via a comment avatar in Gridbox < 2.20.2 |
| The WowStore – Store Builder & Product Blocks for WooCommerce plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'currentPostId' Block Attribute in all versions up to, and including, 4.4.24 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The GTM4WP – A Google Tag Manager (GTM) plugin for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via WooCommerce Billing Fields in all versions up to, and including, 1.22.3 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This requires the GTM4WP WooCommerce order data integration option (GTM4WP_OPTION_INTEGRATE_WCORDERDATA) to be enabled, and is exploited by placing a guest checkout order with a JavaScript payload in a WooCommerce billing field such as the billing first name. |
| The Booking System Trafft plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `bookingWebsiteUrl` setting in all versions up to, and including, 1.0.17 due to a missing capability check on the `set_options` AJAX action when the plugin is operating in agency mode. The `trafftSetOptions()` handler verifies a nonce that is exposed to any authenticated user (it is printed inline on every admin page, including profile.php) but performs no capability check before calling `update_option('trafft_option', ['bookingWebsiteUrl' => ...])`. This setting is then used by `trafftAdminAssets()` to enqueue `<bookingWebsiteUrl>/embed.js` as a script on every front-end page that renders the booking shortcode. This makes it possible for authenticated attackers, with Subscriber-level access and above, to point the embed-script URL at an attacker-controlled origin and execute arbitrary JavaScript in the browser of every site visitor (including admins). |
| Multiple unbounded alloca() calls in the PulseAudio protocol server. |
| Uncontrolled Resource Consumption vulnerability in the HTTP/1.1 message parser in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending messages with excessive number of headers / excessive header length |
| Allocation of resources without limits or throttling in the HTTP/2 HPACK decoder in Apache HttpComponents Core (5.4.2 and earlier, 5.5-beta1 and earlier) allows an remote attacker to cause a denial of service through memory exhaustion by sending oversized compressed header blocks before the HTTP/2 SETTINGS acknowledgement causes the configured header list size limit to be applied. |
| Overly permissive file permissions in AWS CLI before 1.44.78 (v1) and 2.34.29 (v2) on Unix-like systems where the umask has not been configured to restrict file permissions (the default on most systems) may allow other local users on the same host to read credentials written by certain CLI subcommands (aws codeartifact login, aws iam create-virtual-mfa-device, aws deploy register).
To remediate this issue, users should upgrade to AWS CLI 1.44.78 (v1) or 2.34.29 (v2) or later. |
| Improper neutralization of input during web page generation ('cross-site scripting') vulnerability in The Wikimedia Foundation Mediawiki - Charts Extension allows Cross-Site Scripting (XSS).
This issue affects Mediawiki - Charts Extension: from * before 1.43.9,1.44.6,1.45.4. |
