| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the access control list (ACL) programming of Cisco IOS XE Software for Cisco Catalyst 9500X and 9600X Series Switches could allow an unauthenticated, remote attacker to bypass a configured ACL on an affected device.
This vulnerability is due to the flooding of traffic from an unlearned MAC address on a switch virtual interface (SVI) that has an egress ACL applied. An attacker could exploit this vulnerability by causing the VLAN to flush its MAC address table. This condition can also occur if the MAC address table is full. A successful exploit could allow the attacker to bypass an egress ACL on an affected device. |
| A vulnerability in the access control list (ACL) processing of IPv4 packets of Cisco SD-WAN vEdge Software could allow an unauthenticated, remote attacker to bypass a configured ACL.
This vulnerability is due to the improper enforcement of the implicit deny all at the end of a configured ACL. An attacker could exploit this vulnerability by attempting to send unauthorized traffic to an interface on an affected device. A successful exploit could allow the attacker to bypass an ACL on the affected device. |
| Kottster is a self hosted Node.js admin panel. From versions 3.2.0 to before 3.3.2, Kottster contains a pre-authentication remote code execution (RCE) vulnerability when running in development mode. This affects development mode only, production deployments were never affected. This issue has been fixed in version 3.3.2. |
| External Secrets Operator reads information from a third-party service and automatically injects the values as Kubernetes Secrets. A vulnerability was discovered in the BeyondTrust provider implementation for External Secrets Operator versions 0.10.1 through 0.19.2. The provider previously retrieved Kubernetes secrets directly, without validating the namespace context or the type of secret store. This allowed unauthorized cross-namespace secret access, violating security boundaries and potentially exposing sensitive credentials. In version 0.20.0, the provider code was updated to use the `resolvers.SecretKeyRef` utility, which enforces namespace validation and only allows cross-namespace access for `ClusterSecretStore` types. This ensures secrets are only retrieved from the correct namespace, mitigating the risk of unauthorized access. All users should upgrade to the latest version containing this fix. As a workaround, use a policy engine such as Kyverno or OPA to prevent using BeyondTrust provider and/or validate the `(Cluster)SecretStore` and ensure the namespace may only be set when using a `ClusterSecretStore`. |
| An issue was discovered on IROAD Dashcam V devices. It uses an unregistered public domain name as an internal domain, creating a security risk. During analysis, it was found that this domain was not owned by IROAD, allowing an attacker to register it and potentially intercept sensitive device traffic. If the dashcam or related services attempt to resolve this domain over the public Internet instead of locally, it could lead to data exfiltration or man-in-the-middle attacks. |
| A vulnerability has been identified in SCALANCE WAB762-1 (6GK5762-1AJ00-6AA0) (All versions < V3.0.0), SCALANCE WAM763-1 (6GK5763-1AL00-7DA0) (All versions < V3.0.0), SCALANCE WAM763-1 (ME) (6GK5763-1AL00-7DC0) (All versions < V3.0.0), SCALANCE WAM763-1 (US) (6GK5763-1AL00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 (6GK5766-1GE00-7DA0) (All versions < V3.0.0), SCALANCE WAM766-1 (ME) (6GK5766-1GE00-7DC0) (All versions < V3.0.0), SCALANCE WAM766-1 (US) (6GK5766-1GE00-7DB0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (6GK5766-1GE00-7TA0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (ME) (6GK5766-1GE00-7TC0) (All versions < V3.0.0), SCALANCE WAM766-1 EEC (US) (6GK5766-1GE00-7TB0) (All versions < V3.0.0), SCALANCE WUB762-1 (6GK5762-1AJ00-1AA0) (All versions < V3.0.0), SCALANCE WUB762-1 iFeatures (6GK5762-1AJ00-2AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3AA0) (All versions < V3.0.0), SCALANCE WUM763-1 (6GK5763-1AL00-3DA0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3AB0) (All versions < V3.0.0), SCALANCE WUM763-1 (US) (6GK5763-1AL00-3DB0) (All versions < V3.0.0), SCALANCE WUM766-1 (6GK5766-1GE00-3DA0) (All versions < V3.0.0), SCALANCE WUM766-1 (ME) (6GK5766-1GE00-3DC0) (All versions < V3.0.0), SCALANCE WUM766-1 (USA) (6GK5766-1GE00-3DB0) (All versions < V3.0.0). Affected devices with role `user` is affected by incorrect authorization in SNMPv3 View configuration. This could allow an attacker to change the View Type of SNMPv3 Views. |
| A "Privilege boundary violation" vulnerability is identified affecting multiple Radiometer Products. Exploitation of this vulnerability gives a user with physical access to the analyzer, the possibility to gain unauthorized access to functionalities outside the restricted environment. The vulnerability is due to weakness in the design of access control implementation in application software.
Other related CVE's are CVE-2025-14096 & CVE-2025-14097.
Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required configuration for Exposure:
Physical access to the analyzer is needed.
Temporary work Around:
Only authorized people can physically access the analyzer.
Permanent solution:
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept. Radiometer is not aware of any publicly available exploit at the time of publication. Note:
CVSS score 6.8 when underlying OS is Windows 7 or Windows XP Operating systems and CVSS score 5.7 when underlying OS is Windows 8 or Windows 10 operating systems. |
| An uncontrolled resource consumption vulnerability affects certain ASUS motherboards using Intel B460, B560, B660, B760, H410, H510, H610, H470, Z590, Z690, Z790, W480, W680 series chipsets. Exploitation requires physical access to internal expansion slots to install a specially crafted device and supporting software utility, and may lead to uncontrolled resource consumption that increases the risk of unauthorized direct memory access (DMA).
Refer to the 'Security Update for UEFI firmware' section on the ASUS Security Advisory for more information. |
| A Host Header Injection vulnerability exists in the password reset functionality of CraftMyCMS 4.0.2.2. The system uses `$_SERVER['HTTP_HOST']` directly to construct password reset links sent via email. An attacker can manipulate the Host header to send malicious reset links, enabling phishing attacks or account takeover. |
| Incorrect access control on Dataphone A920 v2025.07.161103 exposes a service on port 8888 by default on the local network without authentication. This allows an attacker to interact with the device via a TCP socket without credentials. Additionally, sending an HTTP request to the service on port 8888 triggers an error in the response, which exposes the functionality, headers identifying Paytef dataphone packets, and the build version. |
| AG Life Logger Android App version v1.0.2.72 and before (package name com.donki.healthy), developed by IO FIT, K.K., contains improper access control vulnerabilities. Exposed credentials in traffic may allow attackers to misuse cloud resources, and predictable verification codes make brute-force account logins feasible. Successful exploitation could result in account compromise, privacy breaches, and abuse of cloud resources. |
| Kanova Android App version 1.0.27 (package name com.karelane), developed by Karely L.L.C., contains improper access control vulnerabilities. Attackers may gain unauthorized access to user details and obtain group information, including entry codes, by manipulating API request parameters. Successful exploitation could result in privacy breaches, unauthorized group access, and misuse of the platform. |
| mCarFix Motorists App version 2.3 (package name com.skytop.mcarfix), developed by Paniel Mwaura, contains improper access control vulnerabilities. Attackers may bypass verification to arbitrarily register accounts, and by tampering with sequential numeric IDs, gain unauthorized access to user data and groups. Successful exploitation could result in fake account creation, privacy breaches, and misuse of the platform. |
| Senza: Keto & Fasting Android App version 2.10.15 (package name com.gl.senza), developed by Paul Itoi, contains an improper access control vulnerability. By exploiting insufficient checks in user data API endpoints, attackers can obtain authentication tokens and perform account takeover. Successful exploitation could result in unauthorized account access, privacy breaches, and misuse of the platform. |
| AdForest - Classified Android App version 4.0.12 (package name scriptsbundle.adforest), developed by Muhammad Jawad Arshad, contains an improper access control vulnerability in its authentication mechanism. The app uses a Base64-encoded email address as the authorization credential, which can be manipulated by attackers to gain unauthorized access to user accounts. Successful exploitation could result in account compromise, privacy breaches, and misuse of the platform. |
| ABC Fine Wine & Spirits Android App version v.11.27.5 and before (package name com.cta.abcfinewineandspirits), developed by ABC Liquors, Inc., contains an improper access control vulnerability in its login mechanism. The application does not properly validate user passwords during authentication, allowing attackers to bypass login checks and obtain valid session identifiers. Successful exploitation could result in unauthorized account access, privacy breaches, and misuse of the platform. |
| Improper access control for some Intel(R) Data Center GPU Flex Series for Windows driver software before version 31.0.101.4255 may allow an authenticated user to potentially enable denial of service via local access. |
| 2nd Line Android App version v1.2.92 and before (package name com.mysecondline.app), developed by AutoBizLine, Inc., contains an improper access control vulnerability in its authentication mechanism. The server only validates the first character of the user_token, enabling attackers to brute force tokens and perform unauthorized queries on other user accounts. Successful exploitation could result in privacy breaches and unauthorized access to user data. |
| TalkTalk 3.3.6 Android App contains improper access control vulnerabilities in multiple API endpoints. By modifying request parameters, attackers may obtain sensitive user information (such as device identifiers and birthdays) and access private group information, including join credentials. Successful exploitation may result in privacy breaches and unauthorized access to restricted resources. |
| IDOR vulnerability in Educare ERP 1.0 (2025-04-22) allows unauthorized access to sensitive data via manipulated object references. Affected endpoints do not enforce proper authorization checks, allowing authenticated users to access or modify data belonging to other users by changing object identifiers in API requests. Attackers can exploit this flaw to view or modify sensitive records without proper authorization. |
