| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Reliance on IP Address for Authentication vulnerability in Erlang/OTP ssl (inet_tls_dist module) allows unauthenticated bypass of the distribution-over-TLS LAN allowlist.
The inet_tls_dist:check_ip/1 function, which enforces a LAN allowlist for Erlang distribution over TLS, calls inet:sockname/1 instead of inet:peername/1 to obtain the peer's IP address. Because inet:sockname/1 returns the local socket address, both the local IP and the supposed peer IP resolve to the same value, causing the subnet mask comparison to always succeed regardless of the actual remote address. Any holder of a CA-signed TLS certificate can therefore bypass the LAN restriction and gain full Erlang distribution access to the node, including rpc:call/4 and code:load_binary/3.
This vulnerability is associated with program file lib/ssl/src/inet_tls_dist.erl.
This issue affects OTP from OTP 26.0 before OTP 29.0.2, OTP 28.5.0.2 and OTP 27.3.4.13, corresponding to ssl from 11.0 before 11.7.2, 11.6.0.2 and 11.2.12.9. |
| Loop with Unreachable Exit Condition ('Infinite Loop') vulnerability in Erlang OTP ssh (ssh_sftpd module) allows an authenticated SFTP user to render an SFTP channel permanently unresponsive.
The handle_data/4 function in ssh_sftpd contains a catch-all clause that accepts channel data of any type. When channel data with a non-zero type code (SSH_MSG_CHANNEL_EXTENDED_DATA) arrives with an empty pending buffer and a payload at or below the SFTP packet size limit, the clause tail-calls itself with identical arguments, creating an infinite loop.
The SFTP protocol operates exclusively on normal channel data (type 0). Extended data (non-zero type) is meaningless for SFTP and is never sent by conforming clients. However, the SSH protocol permits any channel participant to send extended data on an open channel, so an authenticated SFTP client can trigger the loop by sending SSH_MSG_CHANNEL_EXTENDED_DATA with any data_type_code and any non-empty payload at or below the size limit.
The targeted ssh_sftpd process enters an infinite tail-recursive loop. It never processes another message, its message queue grows without bound, and it can only be stopped by killing the process. BEAM's reduction-based scheduler preemption continues to function, so other processes on the node are not starved, but each stuck channel process consumes its full CPU time share continuously and accumulates unbounded message queue memory. Opening many channels amplifies the CPU and memory impact.
Erlang/OTP SSH configurations using the default max_channels setting (infinity) allow an authenticated user to open unlimited channels per connection, amplifying the attack without requiring multiple TCP connections or authentications.
No file contents, credentials, or write access are obtainable through this issue. The impact is limited to denial of service on targeted SFTP channels, with secondary CPU degradation and memory growth.
This vulnerability is associated with program file lib/ssh/src/ssh_sftpd.erl and program routine ssh_sftpd:handle_data/4.
This issue affects OTP from OTP 17.0 before OTP 29.0.3, OTP 28.5.0.3 and OTP 27.3.4.14, corresponding to ssh from 3.0.1 before 6.0.2, 5.5.2.2 and 5.2.11.9. |
| Incorrect Authorization vulnerability in Erlang OTP (inets modules) allows unauthenticated access to CGI scripts protected by directory rules when served via script_alias.
When script_alias maps a URL prefix to a directory outside DocumentRoot, mod_auth evaluates directory-based access controls against the DocumentRoot-relative path while mod_cgi executes the script at the ScriptAlias-resolved path. This path mismatch allows unauthenticated access to CGI scripts that directory rules were meant to protect.
This vulnerability is associated with program files lib/inets/src/http_server/mod_alias.erl, lib/inets/src/http_server/mod_auth.erl, and lib/inets/src/http_server/mod_cgi.erl.
This issue affects OTP from OTP 17.0 before OTP 28.4.2, OTP 27.3.4.10 and OTP 26.2.5.19, corresponding to inets from 5.10 before 9.6.2, 9.3.2.4 and 9.1.0.6. |
| Incorrect Authorization vulnerability in ash-project ash allows Authentication Bypass. This vulnerability is associated with program files lib/ash/policy/authorizer/authorizer.ex and program routines 'Elixir.Ash.Policy.Authorizer':strict_filters/2.
This issue affects ash: from 0.1.0 before 3.6.2. |
| Incorrect Authorization vulnerability in ash-project ash allows Exploiting Incorrectly Configured Access Control Security Levels. This vulnerability is associated with program files lib/ash/actions/create/bulk.ex, lib/ash/actions/destroy/bulk.ex, lib/ash/actions/update/bulk.ex and program routines 'Elixir.Ash.Actions.Create.Bulk':run/5, 'Elixir.Ash.Actions.Destroy.Bulk':run/6, 'Elixir.Ash.Actions.Update.Bulk:run'/6.
This issue affects ash: from 0.1.0 before 3.5.39. |
| Incorrect Authorization vulnerability in ash-project ash allows Authentication Bypass. This vulnerability is associated with program files lib/ash/policy/policy.ex and program routines 'Elixir.Ash.Policy.Policy':expression/2.
This issue affects ash: from 3.6.3 before 3.7.1. |
| A vulnerability was determined in CodeAstro Online Classroom 1.0. Affected by this issue is some unknown functionality of the file /OnlineClassroom/loginlinkadmin.php. Executing a manipulation of the argument aid can lead to sql injection. The attack can be executed remotely. The exploit has been publicly disclosed and may be utilized. |
| Traefik is an open source HTTP reverse proxy and load balancer. From v3.7.0 prior to v3.7.6, Traefik's Kubernetes Gateway API provider may resolve two accepted HTTPRoutes that target the same backend Service:port but configure different backendRef filters to the same child service and apply only one route's filter set to all requests reaching that backend. In Gateway deployments where backendRef filters set security-sensitive headers, such as tenant identity, authorization context, or values the backend trusts, an attacker who can create an accepted HTTPRoute sharing the same backend Service:port may cause their route's filter context to be applied to another route's requests, potentially crossing namespace boundaries when a ReferenceGrant permits cross-namespace targeting. This issue is fixed in version v3.7.6. |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Information disclosure due to uninitialized memory in the Graphics: WebGPU component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| Mitigation bypass in the DOM: Service Workers component. This vulnerability was fixed in Firefox 153 and Thunderbird 153. |
| An authenticated user with low privileges may be able to perform unauthorized reads and writes on data protected by role-based query-level access controls, due to insufficient validation of certain client-supplied command parameters. The issue affects find, update, delete, and aggregate commands in non-apiStrict configurations. |
| When PROXY protocol v2 is used on the Unix domain socket path, roles derived from X.509 client certificates may not be validated against the configured tlsCATrusts allow-list. This can result in unintended role assignments following MONGODB-X509 authentication. Affected scenarios require local access to the proxy Unix domain socket and a valid X.509 certificate issued by a trusted certificate authority. |
| Better Auth is an authentication and authorization library for TypeScript. From 1.2.10 until 1.6.11, the @better-auth/sso plugin's POST /sso/register endpoint lets any organization member attach a new SSO provider to that organization because registerSSOProvider checks only for a membership row and does not require an owner or admin role, allowing attacker-controlled OIDC or SAML providers to drive /sso/callback/{providerId} organization provisioning. This issue is fixed in version 1.6.11. |
| The Advance Product Search- Voice & Ajax Search for WooCommerce plugin for WordPress is vulnerable to generic SQL Injection via the 's' and 'match' parameter in all versions up to, and including, 1.4.4 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The MultiVendorX – WooCommerce Multivendor Marketplace AI Powered Solutions plugin for WordPress is vulnerable to generic SQL Injection via the 'order_by' parameter in all versions up to, and including, 5.0.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with subscriber-level access and above, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. This vulnerability is exploitable by any authenticated subscriber-level user when the plugin's store approval setting is configured to automatically approve store owners (described as the default), as this allows any logged-in user to self-register as a store_owner via the public Stores REST endpoint, thereby obtaining the edit_stores capability required to reach the vulnerable transactions endpoint. |
| The The Cache Purger plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 2.3.20. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to permanently truncate the plugin's cache-purge audit log (wp-content/purge.log), destroying the entire cache-purge audit history. The tcp_log_purge nonce is rendered in the admin bar on frontend pages accessible to all authenticated users including subscribers, meaning any authenticated user possesses the nonce required to trigger the deletion. |
| Joomla Extension - themexpert.com - Unauthenticated SQL injection in Quix Page Builder Pro < 6.2.1 - The Joomla extension Quix Page Builder Pro is vulnerable to an unauthenticated SQL injection. |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. Prior to 0.241.203, the authenticated GET /api/user/info/<user_id> and GET /api/user/profile-image/<user_id> endpoints in application/single_app/route_backend_users.py accepted a caller-supplied user_id and read the matching Cosmos DB user-settings document without object-level authorization, allowing a low-privilege authenticated user to retrieve another user's email address, display name, and profile image. This issue is fixed in version 0.241.203. |
| SimpleChat is a secure AI conversation application with personal and group workspaces for document-grounded interactions. Prior to 0.241.206, several plugin validation routes in application/single_app/plugin_validation_endpoint.py, including `POST /api/admin/plugins/test-instantiation`, `GET /api/admin/plugins/health-check/<plugin_name>`, `POST /api/admin/plugins/repair/<plugin_name>`, and `POST /api/plugins/validate`, relied on @swagger_route(security=get_auth_security()) documentation without enforcing @login_required, @user_required, or @admin_required at runtime, allowing unauthenticated or unauthorized clients to invoke plugin validation, health, and repair behavior. This issue is fixed in version 0.241.206. |
