| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/vmemmap/devdax: fix kernel crash when probing devdax devices
commit 4917f55b4ef9 ("mm/sparse-vmemmap: improve memory savings for
compound devmaps") added support for using optimized vmmemap for devdax
devices. But how vmemmap mappings are created are architecture specific.
For example, powerpc with hash translation doesn't have vmemmap mappings
in init_mm page table instead they are bolted table entries in the
hardware page table
vmemmap_populate_compound_pages() used by vmemmap optimization code is not
aware of these architecture-specific mapping. Hence allow architecture to
opt for this feature. I selected architectures supporting
HUGETLB_PAGE_OPTIMIZE_VMEMMAP option as also supporting this feature.
This patch fixes the below crash on ppc64.
BUG: Unable to handle kernel data access on write at 0xc00c000100400038
Faulting instruction address: 0xc000000001269d90
Oops: Kernel access of bad area, sig: 11 [#1]
LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 6.3.0-rc5-150500.34-default+ #2 5c90a668b6bbd142599890245c2fb5de19d7d28a
Hardware name: IBM,9009-42G POWER9 (raw) 0x4e0202 0xf000005 of:IBM,FW950.40 (VL950_099) hv:phyp pSeries
NIP: c000000001269d90 LR: c0000000004c57d4 CTR: 0000000000000000
REGS: c000000003632c30 TRAP: 0300 Not tainted (6.3.0-rc5-150500.34-default+)
MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24842228 XER: 00000000
CFAR: c0000000004c57d0 DAR: c00c000100400038 DSISR: 42000000 IRQMASK: 0
....
NIP [c000000001269d90] __init_single_page.isra.74+0x14/0x4c
LR [c0000000004c57d4] __init_zone_device_page+0x44/0xd0
Call Trace:
[c000000003632ed0] [c000000003632f60] 0xc000000003632f60 (unreliable)
[c000000003632f10] [c0000000004c5ca0] memmap_init_zone_device+0x170/0x250
[c000000003632fe0] [c0000000005575f8] memremap_pages+0x2c8/0x7f0
[c0000000036330c0] [c000000000557b5c] devm_memremap_pages+0x3c/0xa0
[c000000003633100] [c000000000d458a8] dev_dax_probe+0x108/0x3e0
[c0000000036331a0] [c000000000d41430] dax_bus_probe+0xb0/0x140
[c0000000036331d0] [c000000000cef27c] really_probe+0x19c/0x520
[c000000003633260] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c0000000036332e0] [c000000000cef888] driver_probe_device+0x58/0x120
[c000000003633320] [c000000000cefa6c] __device_attach_driver+0x11c/0x1e0
[c0000000036333a0] [c000000000cebc58] bus_for_each_drv+0xa8/0x130
[c000000003633400] [c000000000ceefcc] __device_attach+0x15c/0x250
[c0000000036334a0] [c000000000ced458] bus_probe_device+0x108/0x110
[c0000000036334f0] [c000000000ce92dc] device_add+0x7fc/0xa10
[c0000000036335b0] [c000000000d447c8] devm_create_dev_dax+0x1d8/0x530
[c000000003633640] [c000000000d46b60] __dax_pmem_probe+0x200/0x270
[c0000000036337b0] [c000000000d46bf0] dax_pmem_probe+0x20/0x70
[c0000000036337d0] [c000000000d2279c] nvdimm_bus_probe+0xac/0x2b0
[c000000003633860] [c000000000cef27c] really_probe+0x19c/0x520
[c0000000036338f0] [c000000000cef6b4] __driver_probe_device+0xb4/0x230
[c000000003633970] [c000000000cef888] driver_probe_device+0x58/0x120
[c0000000036339b0] [c000000000cefd08] __driver_attach+0x1d8/0x240
[c000000003633a30] [c000000000cebb04] bus_for_each_dev+0xb4/0x130
[c000000003633a90] [c000000000cee564] driver_attach+0x34/0x50
[c000000003633ab0] [c000000000ced878] bus_add_driver+0x218/0x300
[c000000003633b40] [c000000000cf1144] driver_register+0xa4/0x1b0
[c000000003633bb0] [c000000000d21a0c] __nd_driver_register+0x5c/0x100
[c000000003633c10] [c00000000206a2e8] dax_pmem_init+0x34/0x48
[c000000003633c30] [c0000000000132d0] do_one_initcall+0x60/0x320
[c000000003633d00] [c0000000020051b0] kernel_init_freeable+0x360/0x400
[c000000003633de0] [c000000000013764] kernel_init+0x34/0x1d0
[c000000003633e50] [c00000000000de14] ret_from_kernel_thread+0x5c/0x64 |
| A vulnerability has been found in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /admin/edit_user_account.php of the component User Account Update. Such manipulation of the argument id/username leads to improper authorization. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. |
| A vulnerability was identified in vas3k TaxHacker up to 0.8.2. The affected element is the function envSchema.parse of the file lib/config.ts of the component JWT Secret Handler. The manipulation of the argument BETTER_AUTH_SECRET leads to hard-coded credentials. The attack can be initiated remotely. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability was found in SourceCodester Stock Management System 1.0. This issue affects some unknown processing of the file /php_action/getOrderReport.php. Performing a manipulation of the argument clientName/clientContact results in cross site scripting. It is possible to initiate the attack remotely. The exploit has been made public and could be used. |
| A vulnerability was detected in sambitraj Student-Management-System up to 56ba287f2e9031523ccb4244cb6e3fe530e4e5d5. Affected by this issue is some unknown functionality of the component Dashboard. The manipulation of the argument roll_no/teacher_name results in sql injection. The attack can be executed remotely. The exploit is now public and may be used. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. The project was informed of the problem early through an issue report but has not responded yet. |
| A weakness has been identified in SourceCodester Class and Exam Timetabling System 1.0. Affected is an unknown function of the file /BSIS1.php. Executing a manipulation of the argument course can lead to cross site scripting. The attack may be launched remotely. The exploit has been made available to the public and could be used for attacks. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: fix BQL reset on SQ re-activation
mlx5e_queue_start() deactivates and re-activates all channels but closes
only the queue being restarted. mlx5e_activate_txqsq() then
unconditionally calls netdev_tx_reset_queue(), zeroing the BQL counters
of channels that kept their in-flight TX WQEs. The next completion then
over-charges and trips the BUG_ON() in dql_completed():
kernel BUG at lib/dynamic_queue_limits.c:99!
RIP: 0010:dql_completed+0x23d/0x280
Call Trace:
<IRQ>
mlx5e_poll_tx_cq+0x668/0xa60
mlx5e_napi_poll+0x5b/0x7b0
net_rx_action+0x15a/0x580
Reset BQL only when the SQ has no bytes in flight (sq->cc == sq->pc).
In the case that reset is skipped, the outstanding WQEs will eventually
complete and rebalance the dql. The dql->limit is carried across the
reset. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Check for tg ops in dce110_set_avmute
Some older DCE timing generators do not implement is_tg_enabled in
their ops table. Calling it unconditionally when waiting for AV mute
frames causes a NULL pointer dereference on Southern Islands dGPUs
when turning the display off over HDMI.
Check that tg and the required ops exist before waiting for frames.
(cherry picked from commit 2686a0c0aaa07bec2e24131835cf27b5fd4935a5) |
| A vulnerability has been found in Systerel S2OPC up to 1.7.3. Impacted is the function SOPC_NodeMgtHelperInternal_AddVariableNodeAttributes of the file src/ClientServer/address_space/internal/sopc_node_mgt_helper_internal.c of the component AddNodes Service. The manipulation of the argument UserAccessLevel leads to out-of-bounds read. It is possible to initiate the attack remotely. A high degree of complexity is needed for the attack. The exploitability is considered difficult. The exploit has been disclosed to the public and may be used. The identifier of the patch is aafbd37d381b618312ebdf5ddf57027f62c14fdd. It is suggested to install a patch to address this issue. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops
fib_nlmsg_size() still estimates nexthop space as if every gateway is
encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an
IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA.
As a result, route notifications can allocate an skb that is too small.
fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the
WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With
panic_on_warn set, this becomes a kernel panic.
Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for
IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop
layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is
actually present. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: handle NULL b_addr in xfs_buf_free
When xfs_buf_alloc_backing_mem() fails, xfs_buf_free() is called with
bp->b_addr still NULL. The code falls through to the folio_put path
which calls virt_to_folio(NULL), dereferencing an invalid address and
causing a kernel crash.
Call Trace:
xfs_buf_free+0x25f/0x510
xfs_buf_alloc+0xc98/0x19b0
xfs_buf_find_insert+0x55/0x14d0
xfs_buf_get_map+0x122b/0x17c0
xfbtree_init_leaf_block+0x11c/0x4a0
xfbtree_init+0x1bb/0x460
xrep_rmap_setup_scan+0x100/0x1f0
xrep_rmapbt+0x41/0xc0
Fix this by skipping folio_put() when bp->b_addr is NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
devlink: fix net namespace reference leak in reload
devlink_nl_reload_doit() calls devlink_netns_get(), which returns a net
with a held reference. When the requested namespace differs from the
current one and the reload action is not DRIVER_REINIT, the function
returns -EOPNOTSUPP without releasing the reference. Add the missing
put_net() on this error path. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix qentry overwrite for CONFIRM_LINK and ADD_LINK_CONT in smc_llc_event_handler()
The SMC_LLC_CONFIRM_LINK / SMC_LLC_ADD_LINK_CONT branch in
smc_llc_event_handler() stores an incoming qentry into the local LLC flow
without first checking whether a qentry is already pending. If a malicious or
buggy peer sends a second CONFIRM_LINK or ADD_LINK_CONT request while a flow is
active and flow->qentry is already set, smc_llc_flow_qentry_set() overwrites the
pointer without freeing the previous allocation, leaking one kmalloc-96 object
per spurious message.
The sibling SMC_LLC_DELETE_LINK branch already has the correct !flow->qentry
guard. Apply the same guard to the CONFIRM_LINK/ADD_LINK_CONT branch so that a
duplicate message when qentry is already occupied falls through to break and is
freed by the kfree(qentry) at the out: label, rather than silently leaking the
existing allocation.
The response direction (smc_llc_rx_response()) is unaffected: it already guards
with flow->qentry at the equivalent site and drops duplicate responses
correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Prevent robust futex exit race some more
A robust futex unlock stores 0 over the whole futex value - wiping
FUTEX_WAITERS - and wakes a single waiter. That wakeup is a one-shot
notification: the protocol relies on its recipient to either acquire the
futex (and eventually unlock while aware of the remaining contention) or
re-arm FUTEX_WAITERS before sleeping again. If the woken waiter is killed
before it can do either, the kernel must jump in and wake the next task
down the line.
This is a known complication of the futex protocol with a previous
partial fix in commit ca16d5bee598 ("futex: Prevent robust futex exit
race"). Unfortunately, that fix is insufficient.
If a third task re-acquired the futex through the uncontended fast
path in the meantime, the notification is lost: robust exit processing
sees that it is owned by another task and does nothing, while the new
owner sees no FUTEX_WAITERS when it unlocks and wakes nobody.
The remaining waiters sleep forever behind a free futex:
A owns the futex, B and C sleep in FUTEX_WAIT
uval == A | FUTEX_WAITERS
A robust unlock: store 0, FUTEX_WAKE(1) wakes B
uval == 0
D fast path acquire: cmpxchg(0 -> D)
uval == D, no FUTEX_WAITERS
B killed before acting on the wakeup
B exit walk, pending op: owner D != B -> no action
D unlock: no FUTEX_WAITERS -> no wake
C sleeps forever
This is clearly a shortcoming in the implementation, which fails to keep
the FUTEX_WAITERS bit consistent.
Work around this by augmenting the robust list exit processing to also
perform the extra wakeup if the futex word is owned by another thread but
FUTEX_WAITERS is not set.
This does not fix the problem of a non-contended take over/release and free
sequence, which has been discussed for years and has been addressed by
commit 3ca9595d9fb6 ("futex: Add support for unlocking robust futexes") and
subsequent changes, but failed to take the problem described above into
account.
A more complete solution which is based on the in kernel unlock of
contended robust futexes has been discussed in the context of this change
and should show up in mainline sooner than later.
[ tglx: Amend change log slightly and fixup coding style ] |
| In the Linux kernel, the following vulnerability has been resolved:
bnge: Fix NULL pointer dereference in aux device release
If allocation of auxr_dev fails during auxiliary device setup, the error
path calls auxiliary_device_uninit(), which eventually invokes
bnge_aux_dev_release().
The release callback unconditionally dereferences aux_priv->auxr_dev->pdev
to retrieve the parent bnge_dev. Since auxr_dev has not yet been allocated
on this failure path, the dereference results in a NULL pointer exception
Retrieve the parent bnge_dev from the auxiliary device's parent instead of
auxr_dev, and free auxr_dev only when it was successfully allocated. This
allows the release callback to correctly clean up partially initialized
auxiliary devices. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_dma: Clear stale RX state on shutdown
serial8250_release_dma() terminates RX DMA and releases the channel, but
leaves rx_running set. If the port is closed while an RX transfer is
active, the stale state remains while rxchan is NULL until the channel is
requested again on the next open.
The DesignWare BUSY workaround added by commit a7b9ce39fbe4
("serial: 8250_dw: Ensure BUSY is deasserted") calls
serial8250_rx_dma_flush() from the LCR write path during startup. This
happens before serial8250_request_dma() obtains a new RX channel. On
reopen, the stale rx_running state therefore makes the flush path pass a
NULL channel to dmaengine_pause(), causing a kernel Oops.
Clear rx_running after terminating RX DMA, matching the TX cleanup. Also
make the flush helper return if the DMA object or RX channel is not
available so startup and teardown paths cannot pass a NULL channel to the
DMAengine API. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mrp: fix uninitialised bytes on the wire
br_mrp_alloc_test_skb() builds MRP test frames on an skb from
dev_alloc_skb(), which does not clear the linear data area. On the MRA
ring-role branch the sub-option TLV header is appended with
sub_tlv = skb_put(skb, sizeof(*sub_tlv));
sub_tlv->type = BR_MRP_SUB_TLV_HEADER_TEST_AUTO_MGR;
so sub_tlv->length is never written, and the two trailing alignment bytes
are appended with a bare skb_put() that does not clear them either. The
neighbouring oui and sub_opt regions are explicitly zeroed, so three
uninitialised bytes are left in every MRA MRP_Test frame that goes out.
Put the sub-option TLV header and the alignment padding in a single
skb_put_zero(), which clears both. The AUTO_MGR sub-TLV carries no
payload, so the zeroed length field is already the value it should have. |
