| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix FDIR CTRL VSI resource leak in ice_reset_all_vfs()
Resetting all VFs causes resource leak on VFs with FDIR filters
enabled as CTRL VSIs are only invalidated and not freed. Fix by using
ice_vf_ctrl_vsi_release() instead of ice_vf_ctrl_invalidate_vsi() which
aligns behavior with the ice_reset_vf() function.
Reproduction:
echo 1 > /sys/class/net/$pf/device/sriov_numvfs
ethtool -N $vf flow-type ether proto 0x9000 action 0
echo 1 > /sys/class/net/$pf/device/reset |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.11, POST /api/stripe/webhook, POST /api/creem/webhook, and POST /api/waffo/webhook read and log full request bodies before signature validation in router/api-router.go and the payment controllers, allowing an unauthenticated attacker to cause memory pressure, container restarts, or disk exhaustion without forging a successful payment. This issue is fixed in version 1.0.0-rc.11. |
| IBM Db2 12.1.5 for Linux, UNIX and Windows (includes DB2 Connect Server) could allow a local attacker to cause a denial of service due to a memory leak. |
| Scriban before 7.0.0 (affected versions <= 6.6.0) contains an uncontrolled memory allocation vulnerability in the string.pad_left and string.pad_right template functions, which perform no validation on the width parameter before delegating to .NET's String.PadLeft/PadRight. When an application exposes Scriban to untrusted template input, an attacker can supply an arbitrarily large width value (e.g., 500,000,000) to trigger ~1GB memory allocations in a single call, resulting in OutOfMemoryException and denial of service. The TemplateContext.LimitToString limit does not prevent this because it is only enforced after the string has been fully allocated. |
| Net::OAuth versions before 0.32 for Perl allow memory exhaustion via unbounded caching of failed module loads in smart_require.
smart_require stores results in a process-global hash with no bound and no eviction, and keeps an entry for every class name it is asked about, including names that failed to load, because the return value of the failed eval is stored before the error is checked. The key comes off the wire on the server side: _signature_method_class builds the class name from the signature_method parameter of the incoming message, and verify resolves it before any signature is checked.
A remote client chooses both how many entries are created and how long each key is. In a persistent server the hash grows for the life of the worker process until it exhausts memory. Header size limits bound the key length on the Authorization header path, but not on a POST body. |
| Net::OAuth::Client versions before 0.32 for Perl allow the service provider to silently downgrade OAuth 1.0a to OAuth 1.0 in get_request_token.
Passing a callback to the constructor selects OAuth 1.0a. get_request_token then revokes that choice when the request token response omits oauth_callback_confirmed, with no exception, no warning and no option to require 1.0a. The access token request is built from the OAuth 1.0 message class, which has no verifier parameter, so oauth_verifier is dropped from the request even when get_access_token was passed one.
oauth_verifier is the binding that OAuth 1.0a added between the authorization step and the token exchange. An application that asked for 1.0a and gets 1.0 is open to OAuth 1.0 session fixation, where an attacker obtains a request token, has the victim authorize it, and then completes the exchange themselves, linking the victim's provider account to a session the attacker controls. No attacker action sets up the downgrade: a provider that does not confirm the callback is enough. |
| D-Link DWR-M961 devices with hardware version C1 and firmware version before 1.1.5_C1_202607071108 contain a command injection vulnerability in the /boafrm/formTracerouteDiagnosticRun interface. A remote attacker can inject arbitrary malicious commands into the host and ipVer fields, resulting in command execution with root privileges. |
| Domoticz versions prior to 2026.3 contains a stored cross-site scripting vulnerability in the mobile dashboard that allows authenticated attackers to inject arbitrary HTML and JavaScript by updating Text or Alert subtype device values through the API. The mobile dashboard renders device data via ng-bind-html with only an nl2br() transform that performs no HTML escaping, allowing attackers to store malicious payloads that execute in any administrator's browser upon viewing the mobile dashboard, enabling session cookie theft and account takeover. |
| In the Linux kernel, the following vulnerability has been resolved:
SUNRPC: Bound-check xdr_buf_to_bvec() stores before writing
xdr_buf_to_bvec() writes a bio_vec into the caller's array before
testing whether that slot is in range, and the head branch performs
the store with no check at all. When the caller's budget is exactly
used up, the next store lands one element past the end of the array.
The overflow label returns count - 1, which masks the surplus store
but cannot undo it.
rq_bvec, the array passed by nfsd_vfs_write(), is allocated to
exactly rq_maxpages entries with no slack. The OOB store can land in
adjacent slab memory; the bv_len and bv_offset fields written there
are derived from client-supplied RPC payload sizes.
Move the in-range check ahead of the store in the head, page-loop,
and tail branches. With the check at the top of each sequence, count
is incremented only after a successful store, so the overflow label
can return count directly. |
| The Smash Balloon Social Post Feed – Simple Social Feeds for WordPress plugin for WordPress is vulnerable to Stored Cross-Site Scripting via 'id' Shortcode Attribute in all versions up to, and including, 4.9.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: bpf: Fix hid_bpf_get_data() range check
hid_bpf_get_data() returns a pointer into the HID-BPF context data when
the caller-provided offset and size fit inside ctx->allocated_size.
The current check adds rdwr_buf_size and offset before comparing the
result against ctx->allocated_size. Since both values are unsigned, a
very large size can wrap the sum below ctx->allocated_size and make the
helper return a pointer even though the requested range is not contained
in the backing buffer.
Use check_add_overflow() to reject wrapped range ends before comparing
the requested range end against ctx->allocated_size. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to cause a denial of service due to a stack-based buffer overflow. |
| In the Linux kernel, the following vulnerability has been resolved:
net: qrtr: fix 32-bit integer overflow in qrtr_endpoint_post()
qrtr_endpoint_post() validates an incoming packet with
if (!size || len != ALIGN(size, 4) + hdrlen)
goto err;
where size comes from the wire. On 32-bit, size_t is 32 bits and
ALIGN(size, 4) wraps to 0 for size >= 0xfffffffd, so the check
passes and skb_put_data(skb, data + hdrlen, size) writes past the
hdrlen-sized skb and oopses the kernel. 64-bit is unaffected.
This is the 32-bit residual of ad9d24c9429e2 ("net: qrtr: fix OOB
Read in qrtr_endpoint_post"), which fixed only the 64-bit case.
Reject any size that cannot fit the buffer before the ALIGN. |
| Scriban versions from 3.0.0 through 7.2.5 contain a denial of service vulnerability in the ScriptRange.Multiply operator that bypasses LoopLimit when the left operand is a lazy sequence. Attackers can supply templates with array multiplication on lazy sequences to execute billions of uncharged iterations, pinning CPU cores and exhausting garbage collection resources even when LoopLimit is set to 1. |
| SiYuan versions before v3.7.4 fail to validate or escape the color field in attribute-view select options, allowing stored cross-site scripting through eight unescaped render sites. Attackers can inject event-handler attributes by including quotation marks in the color value, executing arbitrary JavaScript when viewing databases containing the malicious select field. |
| FileBrowser versions before 2.63.19 fail to enforce the declared Upload-Length in the TUS resumable-upload PATCH endpoint, allowing authenticated users to write arbitrary data to disk. Attackers can send oversized request bodies that exceed the declared upload length to exhaust available disk space and cause service unavailability. |
| The Bold Page Builder plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'bt_bb_shortcode' shortcode in all versions up to, and including, 5.6.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A vulnerability was detected in itsourcecode Hospital Management System 1.0. The impacted element is an unknown function of the file /viewprescriptionrecord.php. The manipulation of the argument delid results in sql injection. It is possible to launch the attack remotely. The exploit is now public and may be used. |
| A vulnerability was detected in GL.iNet A1300, AX1800, AXT1800, MT2500, MT3000, MT6000, X3000 and XE3000 4.8.x. This issue affects some unknown processing of the file /usr/bin/gl_nas_sys of the component NAS Command Service. The manipulation results in os command injection. The attack may be launched remotely. Upgrading to version 4.9.0 is capable of addressing this issue. It is suggested to upgrade the affected component. The vendor explains: "After our investigation, we have confirmed that the vulnerability described (...) does indeed exist." |
| A vulnerability has been found in Edimax EW-7478APC 1.04. Affected by this issue is the function stainfo of the file /goform/stainfo. The manipulation of the argument interface leads to command injection. It is possible to initiate the attack remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
