| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| ImageMagick before 7.1.2-26 contains a memory leak vulnerability in the VIFF encoder when memory allocation fails. Attackers can trigger allocation failures by processing specially crafted VIFF images to exhaust available memory and cause denial of service. |
| A Missing Release of Memory after Effective Lifetime vulnerability in the packet forwarding engine (pfe) of Juniper Networks Junos OS on specific EX Series devices allows an unauthenticated adjacent attacker to cause a Denial-of-Service (DoS).When sFlow is configured in a Virtual Chassis (VC) scenario with EX4100 Series or EX4400 Series devices, multicast traffic which is received on one VC member and sent out on another member leads to a memory leak and ultimately an FPC crash and restart.
The leak can be monitored by watching the continuous increase of the buffer values in the output of:
user@host> show chassis fpc
This issue affects Junos OS on EX4100 Series and EX4400:
* all versions before 23.2R2-S7,
* 23.4 versions before 23.4R2-S7,
* 24.2 versions before 24.2R2-S4,
* 24.4 versions before 24.4R2. |
| A memory leak in OpenVPN version 2.5.0 through 2.5.11, 2.6.0 through 2.6.20 and 2.7_alpha1 through 2.7.4 allows remote attackers with a valid tls-crypt-v2 client key to potentially cause a denial of service |
| Missing release of memory after effective lifetime vulnerability in Progress MOVEit Transfer (Custom Reports modules).
This issue affects MOVEit Transfer: from 2025.0.0 before 2025.0.8, from 2025.1.0 before 2025.1.4, from 2026.0.0 before 2026.0.1. |
| Imager::File::JPEG versions before 1.003 for Perl leak heap memory when reading a JPEG with repeated APP13 markers in i_readjpeg_wiol.
i_readjpeg_wiol walks the marker list libjpeg returns and, for each APP13 marker, allocates a new buffer with *iptc_itext = mymalloc(...) and overwrites the previous pointer without freeing it. Only the final payload is later turned into a Perl scalar and freed, so a JPEG with N such markers leaks the first N-1 payloads on every read.
In a long-lived process, such as an upload or thumbnailing service, repeated reads accumulate these leaks and exhaust available memory, a denial of service.
The same handler ships bundled in the Imager distribution, where versions before 1.032 are affected and the fix ships in 1.032. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: bh1780: fix PM runtime leak on error path
Move pm_runtime_put_autosuspend() before the error check to ensure
the PM runtime reference count is always decremented after
pm_runtime_get_sync(), regardless of whether the read operation
succeeds or fails. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: Fix resource leaks on errors in gpiochip_add_data_with_key()
Since commit aab5c6f20023 ("gpio: set device type for GPIO chips"),
`gdev->dev.release` is unset. As a result, the reference count to
`gdev->dev` isn't dropped on the error handling paths.
Drop the reference on errors.
Also reorder the instructions to make the error handling simpler.
Now gpiochip_add_data_with_key() roughly looks like:
>>> Some memory allocation. Go to ERR ZONE 1 on errors.
>>> device_initialize().
gpiodev_release() takes over the responsibility for freeing the
resources of `gdev->dev`. The subsequent error handling paths
shouldn't go through ERR ZONE 1 again which leads to double free.
>>> Some initialization mainly on `gdev`.
>>> The rest of initialization. Go to ERR ZONE 2 on errors.
>>> Chip registration success and exit.
>>> ERR ZONE 2. gpio_device_put() and exit.
>>> ERR ZONE 1. |
| In the Linux kernel, the following vulnerability has been resolved:
netdevsim: Fix memory leak of nsim_dev->fa_cookie
kmemleak reports this issue:
unreferenced object 0xffff8881bac872d0 (size 8):
comm "sh", pid 58603, jiffies 4481524462 (age 68.065s)
hex dump (first 8 bytes):
04 00 00 00 de ad be ef ........
backtrace:
[<00000000c80b8577>] __kmalloc+0x49/0x150
[<000000005292b8c6>] nsim_dev_trap_fa_cookie_write+0xc1/0x210 [netdevsim]
[<0000000093d78e77>] full_proxy_write+0xf3/0x180
[<000000005a662c16>] vfs_write+0x1c5/0xaf0
[<000000007aabf84a>] ksys_write+0xed/0x1c0
[<000000005f1d2e47>] do_syscall_64+0x3b/0x90
[<000000006001c6ec>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
The issue occurs in the following scenarios:
nsim_dev_trap_fa_cookie_write()
kmalloc() fa_cookie
nsim_dev->fa_cookie = fa_cookie
..
nsim_drv_remove()
The fa_cookie allocked in nsim_dev_trap_fa_cookie_write() is not freed. To
fix, add kfree(nsim_dev->fa_cookie) to nsim_drv_remove(). |
| ImageMagick before 7.1.2-15 and 6.9.13-40 contains a memory leak in coders/txt.c when processing TXT files with texture attributes: the texture object allocated via ReadImage is not released when GetTypeMetrics fails, leaking memory each time a crafted TXT file with a texture attribute is processed. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying
When marking a page dirty, complain about not having a running/loaded vCPU
if and only if the VM is still alive, i.e. its refcount is non-zero. This
will allow fixing a memory leak for x86 SEV-ES guests without hitting what
is effectively a false positive on the WARN.
For some SEV-ES VM-Exits, KVM keeps a writable mapping of a guest page
across an exit to userspace, and typically unmaps the page on the next
KVM_RUN. But if userspace never calls KVM_RUN after such an exit, then KVM
needs to unmap the page when the vCPU is destroyed, which in turn triggers
the WARN about not having a running vCPU.
Alternatively, SEV-ES could temporarily load the vCPU to suppress the WARN,
as is done in nested_vmx_free_vcpu() (but for completely unrelated reasons;
suppressing WARN from nested_put_vmcs12_pages() is pure happenstance). But
loading a vCPU during destruction is gross (ideally nVMX code would be
cleaned up), risks complicating the SEV-ES code (KVM would need to ensure
the temporarily load()+put() only runs when the vCPU isn't already loaded),
and is ultimately pointless.
The motivation for the WARN is to guard against KVM dirtying guest memory
without pushing the corresponding GFN to the active vCPU's dirty ring, e.g.
to ensure userspace doesn't miss a dirty page. But for the VM's refcount
to reach zero, there can't be _any_ userspace mappings to the dirty ring,
as mapping the dirty ring requires doing mmap() on the vCPU FD. I.e. if
userspace had a valid mapping for the dirty ring, then the vCPU file and
thus the owning VM would still be alive. And so since userspace can't
possibly reach the dirty ring, whether or not KVM technically "misses" a
push to the dirty ring is irrelevant. |
| An unauthenticated remote attacker can repeatedly send crafted connection requests to leak memory. In single-process deployments the memory grows until the service is killed and the port stops responding until restart. |
| An unauthenticated remote attacker can repeatedly send a single crafted connection request to leak memory. Against storescp in its default single-process mode, memory grows quickly and the service is eventually killed, after which it stops accepting connections until an operator restarts it. |
| ImageMagick before 7.1.2-13 contains a memory leak vulnerability in LoadOpenCLDeviceBenchmark() function when parsing malformed OpenCL device profile XML files with unclosed device elements. Attackers with write access to the OpenCL cache directory can place malicious XML files to exhaust memory and cause denial of service. |
| ImageMagick before 7.1.2-19 contains a memory leak vulnerability in the PNG encoder when writing MNG images. Attackers can trigger the encoder failure condition to exhaust memory resources and cause denial of service. |
| CSS::Minifier::XS versions before 0.14 for Perl have a memory leak when the entire document is minified away.
The minify function has a memory leak when processing a document containing only characters to be removed, such as comments and whitespace. |
| JavaScript::Minifier::XS versions before 0.16 for Perl leak memory on every call to minify(), allowing unbounded memory growth.
In JsMinify (XS.xs) the cleanup frees only the NodeSet structures and never the per-token contents buffers allocated in JsSetNodeContents; JsDiscardNode unlinks nodes without freeing their contents. Each token's contents buffer is therefore leaked on every call, and the two early returns taken when the node list is empty leak the whole NodeSet.
A long-lived process that minifies repeatedly, such as an asset pipeline or a server-side minifier endpoint, grows in memory without bound until it exhausts available memory and is killed, causing denial of service. |
| Denial of service via malformed HTTP/2 requests in NetScaler ADC and NetScaler Gateway if HTTP/2 is enabled in HTTP Profile and associated with the virtual server (of type LB, CS, VPN) or the service configured on NetScaler |
| A flaw was found in libssh's handling of key exchange (KEX) processes when a client repeatedly sends incorrect KEX guesses. The library fails to free memory during these rekey operations, which can gradually exhaust system memory. This issue can lead to crashes on the client side, particularly when using libgcrypt, which impacts application stability and availability. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: fix leak if split 6 GHz scanning fails
rdev->int_scan_req is leaked if cfg80211_scan() fails. Note that it's
supposed to be released at ___cfg80211_scan_done() but this doesn't happen
as rdev->scan_req is NULL at that point, too, leading to the early return
from the freeing function.
unreferenced object 0xffff8881161d0800 (size 512):
comm "wpa_supplicant", pid 379, jiffies 4294749765
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 f0 81 13 16 81 88 ff ff ................
backtrace (crc c867fdb6):
kmemleak_alloc+0x89/0x90
__kmalloc_noprof+0x2fd/0x410
cfg80211_scan+0x133/0x730
nl80211_trigger_scan+0xc69/0x1cc0
genl_family_rcv_msg_doit+0x204/0x2f0
genl_rcv_msg+0x431/0x6b0
netlink_rcv_skb+0x143/0x3f0
genl_rcv+0x27/0x40
netlink_unicast+0x4f6/0x820
netlink_sendmsg+0x797/0xce0
__sock_sendmsg+0xc4/0x160
____sys_sendmsg+0x5e4/0x890
___sys_sendmsg+0xf8/0x180
__sys_sendmsg+0x136/0x1e0
__x64_sys_sendmsg+0x76/0xc0
x64_sys_call+0x13f0/0x17d0
Found by Linux Verification Center (linuxtesting.org). |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix sk_ack_backlog leak on failed handshake
When vmci_transport_recv_connecting_server() returns an error,
vmci_transport_recv_listen() calls vsock_remove_pending() but never
calls sk_acceptq_removed(). This leaves sk_ack_backlog incremented
permanently.
Repeated handshake failures (malformed packets, queue pair alloc
failure, event subscribe failure) cause sk_ack_backlog to climb
toward sk_max_ack_backlog. Once it reaches the limit the listener
permanently refuses all new connections with -ECONNREFUSED, a
silent denial of service requiring a process restart to recover.
The two existing sk_acceptq_removed() calls in af_vsock.c do not
cover this path: line 764 checks vsock_is_pending() which returns
false after vsock_remove_pending(), and line 1889 is only reached
on successful accept().
Fix by balancing sk_acceptq_added() with sk_acceptq_removed() on
the error path. |
