| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: hold event_mutex while checkpointing CRIU events
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: validate DRAW_PRIMITIVES header size before division
vmw_cmd_draw() computes
maxnum = (header->size - sizeof(cmd->body)) / sizeof(*decl);
where header->size is u32 and is taken straight from the user-supplied
command stream. When header->size is less than sizeof(cmd->body) the
unsigned subtraction wraps to nearly 4 GiB, producing a huge maxnum.
Any user-controlled cmd->body.numVertexDecls then passes the bound and
the loop dereferences decl[i] far past the end of the kernel command
bounce buffer, producing an out-of-bounds read of kernel memory.
Reject undersized headers up front. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vmwgfx: bound DMA command body size against suffix pointer
vmw_cmd_dma() locates the DMA suffix at
(unsigned long) &cmd->body + header->size - sizeof(*suffix)
without checking that header->size is large enough to contain both
cmd->body and the suffix. An undersized header makes the suffix
pointer underflow back into the previous command in the bounce
buffer. The verifier later writes suffix->maximumOffset, clobbering
verified fields of an already-relocated earlier command -- a TOCTOU
on the device-visible command stream that lets one command rewrite
another's GMR id, surface id, or other authenticated fields.
Reject the command if the body is too small for the suffix to fit. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Wait on external BO kernel fences in exec IOCTL
Before arming a user job, xe_exec_ioctl() only added the VM's
dma-resv KERNEL slot as a dependency. That slot covers rebinds and
the kernel operations of the VM's private BOs, but not external BOs
(bo->vm == NULL), which carry their kernel operations (evictions,
moves, ...) in their own dma-resv KERNEL slot.
The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for
memory management operations that must complete before the BO or its
backing store may be used: any accessor is required to wait on the
KERNEL fences before touching the resv. By skipping the external BOs'
KERNEL slots, the exec path violated that contract and could schedule
a user job while a kernel operation on an external BO mapped by the VM
was still in flight, racing against it and potentially reading or
writing memory that was being moved.
Replace the VM-only dependency with an iteration over every object
locked by the exec, adding each object's KERNEL slot as a job
dependency. This covers the VM resv (rebinds and private BOs) as well
as every external BO, mirroring the drm_gpuvm_resv_add_fence() call
that later publishes the job fence to the same set of objects.
Long-running mode continues to skip this, as before.
(cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7) |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Clear Present bit before tearing down scalable-mode context entry
device_pasid_table_teardown() zeroes the 128-bit scalable-mode context
entry with context_clear_entry() while the Present bit is still set. This
creates a window where the hardware can fetch a torn entry, with some
fields already zeroed while Present is still set, leading to unpredictable
behavior or spurious faults. The context-cache invalidation is issued only
after the entry has been zeroed, and intel_pasid_free_table() then frees
the PASID directory pages, so the IOMMU can keep walking a stale Present=1
entry that points at freed memory.
While x86 provides strong write ordering, the compiler may reorder the two
64-bit writes to the entry, and the hardware fetch is not guaranteed to be
atomic with respect to multiple CPU writes.
Commit c1e4f1dccbe9d ("iommu/vt-d: Clear Present bit before tearing down
context entry") fixed this exact pattern in domain_context_clear_one() and
the copied-context path, but device_pasid_table_teardown() was not
converted.
Align it with the "Guidance to Software for Invalidations" in the VT-d
spec, Section 6.5.3.3, using the same ownership handshake as the sibling
fix: clear only the Present bit, flush it to the IOMMU, perform the
context-cache invalidation, and only then zero the rest of the entry. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: sun4i-ss - Remove insecure and unused rng_alg
Remove sun4i_ss_rng, as it is insecure and unused:
- It has multiple vulnerabilities. sun4i_ss_prng_seed() is missing
locking and has a buffer overflow. sun4i_ss_prng_generate() fails to
fill the entire buffer with cryptographic random bytes, because it
rounds the destination length down and also doesn't actually wait for
the hardware to be ready before pulling bytes from it.
- No user of this code is known. It's usable only theoretically via the
"rng" algorithm type of AF_ALG. But userspace actually just uses the
actual Linux RNG (/dev/random etc) instead. And rng_algs don't
contribute entropy to the actual Linux RNG either. (This may have
been confused with hwrng, which does contribute entropy.)
The sun4i_ss_prng_seed() buffer overflow was reported by Tianchu Chen
and discovered by Atuin - Automated Vulnerability Discovery Engine
There's no point in fixing all these vulnerabilities individually when
this is unused code, so let's just remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: serialize kernel accept preallocation with socket teardown
rxrpc_kernel_charge_accept() reads rx->backlog without any
socket/backlog synchronization and passes that raw pointer into
rxrpc_service_prealloc_one(). A concurrent rxrpc_discard_prealloc()
sets rx->backlog = NULL and frees the backlog rings, so a kernel
preallocation worker can keep using a freed struct rxrpc_backlog
while updating *_backlog_head/tail and array slots.
Serialize the state check and backlog lookup with the socket lock,
and reject kernel preallocation once teardown has disabled
listening or discarded the service backlog. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: rxrpc_verify_data ensure rx_dec_buffer alloc
rxrpc_recvmsg_data() calls rxrpc_verify_data() whenever the
rxrpc_call.rx_dec_buffer is unallocated and assumes that upon
successful return that rx_dec_buffer must be allocated.
However, rxrpc_verify_data() does not request an allocation if
the rxrpc_skb_priv.len is zero.
In addition, failure to allocate rx_dec_buffer will result in a
call to skb_copy_bits() with a NULL destination which can
trigger a NULL pointer dereference.
To prevent these issues rxrpc_verify_data() is modified to
always attempt to allocate the rxrpc_call.rx_dec_buffer if it
is NULL.
This issue was identified with assistance of a private
sashiko instance. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Don't move a peeked OOB message onto the pending queue
rxrpc_recvmsg_oob() takes a received oob message off recvmsg_oobq and,
if a response is needed, moves it onto the pending_oobq tree. However,
only the unlink from recvmsg_oobq is guarded by MSG_PEEK; the move onto
pending_oobq always runs.
As a result, reading a challenge with MSG_PEEK leaves the skb on
recvmsg_oobq while also adding it to pending_oobq. Since struct
sk_buff's rbnode shares storage with its next and prev pointers,
rb_insert_color() overwrites the list linkage, and the skb, which holds
a single reference, becomes reachable from both queues at once.
When the socket is closed both queues are drained in turn. While
draining recvmsg_oobq, __skb_unlink() follows the next and prev
pointers that rbnode has overwritten and writes to a bad address. Also,
as the skb holds a single reference but is freed from each queue, both
the skb and the connection reference it holds are released twice. This
leads to memory corruption and to a use-after-free caused by the
connection refcount underflow.
MSG_PEEK does not consume the message from the queue, so only unlink it
from recvmsg_oobq and then move it onto pending_oobq or free it when
the message is actually consumed. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix UAF in rxgk_issue_challenge()
Fix rxgk_issue_challenge() to free the page containing the challenge
content after invoking the tracepoint as the whdr passed to the tracepoint
points into the page just freed. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix potential infinite loop in rxrpc_recvmsg()
Fix the wait in rxrpc_recvmsg() also take check the oob queue. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix ACKALL packet handling
rxrpc_input_ackall() accepts ACKALL packets without checking whether the
call is in a state that can legitimately have outstanding transmit buffers.
A forged ACKALL can therefore reach a new service call in
RXRPC_CALL_SERVER_RECV_REQUEST before any reply packets have been queued.
In that state call->tx_top is zero and call->tx_queue is NULL, so
rxrpc_rotate_tx_window() dereferences a NULL txqueue and triggers a
null-pointer dereference.
Fix the handling of ACKALL packets by the following means:
(1) Add two new call states: RXRPC_CALL_CLIENT_PRE_SEND which indicates
that the client call is connected, but nothing has been transmitted as
yet; and RXRPC_CALL_CLIENT_AWAIT_ACK, which indicates that everything
has been transmitted at least once, but we're now waiting for the
stuff remaining in the Tx buffer to be ACK'd (retransmissions may
still happen).
The RXRPC_CALL_CLIENT_PRE_SEND state is set when the call is assigned
a channel and transitions to RXRPC_CALL_CLIENT_SEND_REQUEST when the
first packet is transmitted.
RXRPC_CALL_CLIENT_AWAIT_REPLY is then narrowed in scope to indicate
that all Tx packets have been ACK'd and we're now waiting for the
reply to be received.
(2) As per Wyatt Feng's original patch[1], the ACKALL handler then checks
that the call state is one in which there might be stuff in the Tx
buffer to ACK, but now this includes AWAIT_ACK rather than
AWAIT_REPLY. ACKALL packets are ignored if received in the wrong
state.
Note that unlike Wyatt Feng's patch, it's no longer necessary to check
to see if the Tx buffer exists as this the state set now covers this.
(3) Make the ACKALL handler use call->tx_transmitted rather than
call->tx_top as the former is explicitly the highest packet seq number
transmitted, whereas the latter has a looser definition.
Thanks to Jeffrey Altman for a description of the history of the ACKALL
packet[1]. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix the reception of a reply packet before data transmission
Fix rxrpc_receiving_reply() to handle the reception of an apparent reply
DATA packet before rxrpc has had a chance to send any request DATA packets
on a client call by checking to see if the call has been exposed yet by
sending the first packet.
Without this, rxrpc_rotate_tx_window() might oops.
Also fix rxrpc_rotate_tx_window() to handle the Tx queue being empty by
changing the do...while loop into a while loop, just in case a call is
abnormally terminated by an early reply before the last request packet is
transmitted. |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc: Fix double unlock in rxrpc_recvmsg()
Fix a double unlock in rxrpc_recvmsg() when dealing with OOB messages. |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix netns teardown to cancel the preallocation charger
Fix the teardown of an afs network namespace to make sure it cancels the
work item that keeps the preallocated rxrpc call/conn/peer queue charged
before incoming calls are disabled (i.e. listen 0).
Also, if net->live is false because the afs netns is being deleted, make
afs_charge_preallocation() skip charging and make afs_rx_new_call() avoid
requeuing the charger.
(This was found by AI review). |
| In the Linux kernel, the following vulnerability has been resolved:
afs: handle CB.InitCallBackState3 requests without a server record
The cache manager callback path now attaches the server record to an
incoming call through the rxrpc peer's app data. That association is
not guaranteed to exist for every callback request, and most callback
handlers already tolerate that case.
Make CB.InitCallBackState3 follow the same pattern by checking whether a
server record was attached before using it. If the peer is not mapped
to a server record, trace the request and ignore it, matching the
existing behaviour for other unmatched callback requests.
This keeps the callback handler consistent with the rest of the cache
manager service and avoids depending on peer state that may not be
available for a given request. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Adjust size for copy_to_user()
The amount of data returned to user space should be limited by the buffer
size provided by the application. If the buffer is smaller than the data
size, return only the portion that fits instead of failing. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/radeon: fix integer overflow in radeon_align_pitch()
radeon_align_pitch() has the same kind of overflow issue as the old
amdgpu helper: both the alignment round-up add and the final
'aligned * cpp' calculation can overflow signed int.
If that wraps, radeon_mode_dumb_create() can end up returning an
invalid pitch or creating a zero-sized dumb buffer.
Fix this by using check_add_overflow() for the alignment round-up and
check_mul_overflow() for the final pitch calculation, returning 0 on
overflow. Also reject zero pitch and size in
radeon_mode_dumb_create().
Found via AST-based call-graph analysis using sqry. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: fix wrong pci_get_drvdata type in AER handlers
rtw89 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets. The adjacent io_slot_reset() already does it correctly.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver.
Tested on RTL8852CE by calling the handlers from a test module
before and after the fix. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw88: fix wrong pci_get_drvdata type in AER handlers
rtw88 stores an ieee80211_hw pointer via pci_set_drvdata() at probe
time, but io_error_detected() and io_resume() retrieve it as a
net_device pointer. This causes netif_device_detach/attach to
operate on an ieee80211_hw struct, reading and writing at wrong
offsets.
Use ieee80211_stop_queues/wake_queues instead, consistent with
every other queue stop/start path in the driver. |
