| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw before 2026.5.26 contains a hostname validation vulnerability allowing attackers to bypass blocklist comparisons using trailing-dot notation in model or workspace-derived URLs. Attackers can exploit inconsistent hostname checks to reach destinations that operators intended to block through hostname policies. |
| Improper Authorization in Handler for Custom URL Scheme in Zoom Workplace before version 7.0.4 for Android and before 7.0.3 for iOS may allow an unauthenticated user to conduct an escalation of privilege via network access. |
| In the Linux kernel, the following vulnerability has been resolved:
EDAC/versalnet: Fix device_node leak in mc_probe()
of_parse_phandle() returns a device_node reference that must be released with
of_node_put(). The original code never freed r5_core_node on any exit path,
causing a memory leak.
Fix this by using the automatic cleanup attribute __free(device_node) which
ensures of_node_put() is called when the variable goes out of scope. |
| Sync-in Server is a secure, open-source platform for file storage, sharing, collaboration, and syncing. Prior to version 2.3.0, the private IP blocklist regex used in the URL download feature does not match IPv4-mapped IPv6 addresses (e.g. ::ffff:127.0.0.1), allowing SSRF protection to be bypassed on dual-stack systems. Version 2.3.0 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/cdx: Fix NULL pointer dereference in interrupt trigger path
Add validation to ensure MSI is configured before accessing cdx_irqs
array in vfio_cdx_set_msi_trigger(). Without this check, userspace
can trigger a NULL pointer dereference by calling VFIO_DEVICE_SET_IRQS
with VFIO_IRQ_SET_DATA_BOOL or VFIO_IRQ_SET_DATA_NONE flags before
ever setting up interrupts via VFIO_IRQ_SET_DATA_EVENTFD.
The vfio_cdx_msi_enable() function allocates the cdx_irqs array and
sets config_msi to 1 only when called through the EVENTFD path. The
trigger loop (for DATA_BOOL/DATA_NONE) assumed this had already been
done, but there was no enforcement of this call ordering.
This matches the protection used in the PCI VFIO driver where
vfio_pci_set_msi_trigger() checks irq_is() before the trigger loop. |
| IBM Langflow Desktop 1.0.0 through 1.9.2 IBM Langflow is vulnerable to server-side request forgery (SSRF). This may allow an authenticated attacker to send unauthorized requests from the system, potentially leading to network enumeration or facilitating other attacks. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.0, a program able to write bytes to a kitty terminal — a remote SSH peer, a downloaded file viewed with `cat`, a log line, an email body rendered in `less`, an issue body in a TUI, etc. — can cause kitty to execute attacker-supplied Python inside the running kitty process, with the user's full privileges. There is no approval prompt, no remote-control permission requirement, no shell-integration interaction, no clipboard touch, and no editor interaction. Version 0.47.0 fixes the issue. |
| Cursor is a code editor built for programming with AI. In versions prior to 3.0.0, the Cursor Desktop could execute workspace-defined Claude hook commands from .claude/settings.local.json without dedicated user approval. A malicious workspace or agent-created file could configure hooks that run local commands in the user's context when an agent turn ends. This could allow sandbox escape, persistence across turns, local data access, or follow-on compromise. This issue has been fixed in version 3.0.0. |
| Kitty is a cross-platform GPU based terminal. In versions prior to 0.47.3, kitty's OSC 21 (color-control) query reply reflects attacker-controlled bytes, including newlines, into the shell's input without sanitization. Version 0.47.3 fixes the issue. |
| In the Linux kernel, the following vulnerability has been resolved:
inotify: fix watch count leak when fsnotify_add_inode_mark_locked() fails
When fsnotify_add_inode_mark_locked() fails in inotify_new_watch(),
the error path calls inotify_remove_from_idr() but does not call
dec_inotify_watches() to undo the preceding inc_inotify_watches().
This leaks a watch count, and repeated failures can exhaust the
max_user_watches limit with -ENOSPC even when no watches are active.
Prior to commit 1cce1eea0aff ("inotify: Convert to using per-namespace
limits"), the watch count was incremented after fsnotify_add_mark_locked()
succeeded, so this path was not affected. The conversion moved
inc_inotify_watches() before the mark insertion without adding the
corresponding rollback.
Add the missing dec_inotify_watches() call in the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix usb_dev refcount leak on probe failure
create_card() takes a reference on the USB device with usb_get_dev()
and stores the matching usb_put_dev() in card_free(), which is
installed as the snd_card's ->private_free destructor.
However, ->private_free is only assigned near the end of init_card(),
after several failure points (usb_set_interface(), EP type checks,
usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its
timeout). When any of those fail, init_card() returns an error to
snd_probe(), which calls snd_card_free(card). Because ->private_free
is still NULL, card_free() never runs, the usb_get_dev() reference
is not dropped, and the struct usb_device leaks along with its
descriptor allocations and device_private.
syzbot reproduces this with a malformed UAC3 device whose only valid
altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call
fails with -EIO and triggers the leak.
Move the ->private_free assignment into create_card(), immediately
after usb_get_dev(), so that every error path reaching snd_card_free()
balances the reference. card_free()'s callees (snd_usb_caiaq_input_free,
free_urbs, kfree) already tolerate the partially-initialized state
because the chip private area is zero-initialized by snd_card_new(). |
| A code injection vulnerability in version 0.4.17 or later of the ChromaDB Python project allows an authenticated attacker to run arbitrary code on the server by sending a malicious model repository and trust_remote_code set to true in the /api/v2/tenants/default_tenant/databases/default_database/collections/{collection_id} if they have the UPDATE_COLLECTION permission. |
| In the Linux kernel, the following vulnerability has been resolved:
of: unittest: fix use-after-free in testdrv_probe()
The function testdrv_probe() retrieves the device_node from the PCI
device, applies an overlay, and then immediately calls of_node_put(dn).
This releases the reference held by the PCI core, potentially freeing
the node if the reference count drops to zero. Later, the same freed
pointer 'dn' is passed to of_platform_default_populate(), leading to a
use-after-free.
The reference to pdev->dev.of_node is owned by the device model and
should not be released by the driver. Remove the erroneous of_node_put()
to prevent premature freeing. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: fix missing brelse() in ext4_xattr_inode_dec_ref_all()
The commit c8e008b60492 ("ext4: ignore xattrs past end")
introduced a refcount leak in when block_csum is false.
ext4_xattr_inode_dec_ref_all() calls ext4_get_inode_loc() to
get iloc.bh, but never releases it with brelse(). |
| Editor Remote Code Execution (RCE) in Responsive Slider by MetaSlider <= 3.106.0 versions. |
| NPM package next-npm-version1.0.1 is vulnerable to Command injection. |
| A vulnerability has been found in Intelliants Subrion CMS up to 4.0.3. Affected by this issue is some unknown functionality of the component Blocks Endpoint. Such manipulation of the argument CSS class name leads to cross site scripting. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/cio: Fix device lifecycle handling in css_alloc_subchannel()
`css_alloc_subchannel()` calls `device_initialize()` before setting up
the DMA masks. If `dma_set_coherent_mask()` or `dma_set_mask()` fails,
the error path frees the subchannel structure directly, bypassing
the device model reference counting.
Once `device_initialize()` has been called, the embedded struct device
must be released via `put_device()`, allowing the release callback to
free the container structure.
Fix the error path by dropping the initial device reference with
`put_device()` instead of calling `kfree()` directly.
This ensures correct device lifetime handling and avoids potential
use-after-free or double-free issues. |
| In the Linux kernel, the following vulnerability has been resolved:
md/md-llbitmap: fix percpu_ref not resurrected on suspend timeout
When llbitmap_suspend_timeout() times out waiting for percpu_ref to
become zero, it returns -ETIMEDOUT without resurrecting the percpu_ref.
The caller (md_llbitmap_daemon_fn) then continues to the next page
without calling llbitmap_resume(), leaving the percpu_ref in a killed
state permanently.
Fix this by resurrecting the percpu_ref before returning the error,
ensuring the page control structure remains usable for subsequent
operations. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in Edgar Rojas WooCommerce PDF Invoice Builder allows Remote Code Inclusion.
This issue affects WooCommerce PDF Invoice Builder: from n/a through 2.0.8. |
