| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread
When userspace configures 'auto_update_interval' to 0 via sysfs, the
background kthread executes schedule_timeout_interruptible(0), which
returns immediately.
If 'num_temp_sensors' is concurrently or previously set to 0, the
msleep_interruptible() delay inside adt7470_read_temperatures() also
becomes 0. This combination forces the background thread into a tight,
unbounded busy-loop, hogging the CPU and flooding the I2C bus with a
continuous stream of transactions.
Fix this vulnerability by raising the lower limit of the clamp_val in
auto_update_interval_store() from 0 to 500 milliseconds. This guarantees
a reasonable minimum sleep window between sensor updates, protecting the
system from intentional or accidental I2C bus denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: imx: reconfigure for PIO when DMA cannot be started
When spi_imx_can_dma() selects DMA, the ECSPI is configured for DMA:
spi_imx_setupxfer() sets CTRL.SMC and clears dynamic_burst, and
spi_imx_dma_transfer() programs the dynamic-burst BURST_LENGTH and the
SDMA watermarks.
If the DMA descriptor cannot be prepared (dmaengine_prep_slave_single()
returns NULL), the transfer is failed with SPI_TRANS_FAIL_NO_START and
falls back to PIO. The dynamic-burst DMA path uses its own bounce
buffers instead of the SPI core's mapping, so xfer->{tx,rx}_sg_mapped
are not set and the core's DMA->PIO retry is skipped; the driver falls
back to PIO internally. But none of the DMA-mode configuration is
undone, so the PIO transfer runs with CTRL.SMC set, the wrong burst
length and dynamic_burst cleared, and the transferred data is corrupted.
This is easily hit on i.MX8MP boards that describe ECSPI DMA in the
device tree but run SDMA on ROM firmware (no external sdma-imx7d.bin):
every ECSPI DMA prepare fails. An Infineon SLB9670 TPM on ECSPI1 then
returns shifted TPM2_GetCapability data, is flagged "field failure
mode", /dev/tpmrm0 is never created.
Set controller->fallback before re-running spi_imx_setupxfer() so the
ECSPI is reconfigured exactly like a normal PIO transfer. With
controller->fallback set, spi_imx_setupxfer() sees spi_imx_can_dma()
return false, so it clears spi_imx->usedma and reprograms the controller
(clears CTRL.SMC, restores dynamic_burst and the PIO burst length). No
explicit spi_imx->usedma = false is needed: setupxfer() already updates
it from the can_dma() result. |
| Handshake messages, such as KeyUpdate, are always considered as state-advancing, regardless of whether a handshake has been completed or not. As a result, a malicious client can keep sending KeyUpdate messages to force the server to keep performing key derivation operations indefinitely. |
| Unchecked input for loop condition in .NET allows an unauthorized attacker to deny service over a network. |
| Well-crafted inputs reaching ParseAddress, ParseAddressList, and ParseDate were able to trigger excessive CPU exhaustion and memory allocations. |
| (*x509.Certificate).VerifyHostname previously called matchHostnames in a loop over all DNS Subject Alternative Name (SAN) entries. This caused strings.Split(host, ".") to execute repeatedly on the same input hostname. With a large DNS SAN list, verification costs scaled quadratically based on the number of SAN entries multiplied by the hostname's label count. Because x509.Verify validates hostnames before building the certificate chain, this overhead occurred even for untrusted certificates. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: prevent infinite loops caused by the next valid being the same
When processing valid within the range [valid : pos), if valid cannot
be retrieved correctly, for example, if the retrieved valid value is
always the same, this can trigger a potential infinite loop, similar
to the hung problem reported by syzbot [1].
Adding a check for the valid value within the loop body, and terminating
the loop and returning -EINVAL if the value is the same as the current
value, can prevent this.
[1]
INFO: task syz.4.21:6056 blocked for more than 143 seconds.
Call Trace:
rwbase_write_lock+0x14f/0x750 kernel/locking/rwbase_rt.c:244
inode_lock include/linux/fs.h:1027 [inline]
ntfs_file_write_iter+0xe6/0x870 fs/ntfs3/file.c:1284 |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Set upper bounds on cache invalidation entry_num and entry_len
iommufd_hwpt_invalidate() takes a user-controlled entry_num and entry_len,
each bounded only by U32_MAX. An entry_len beyond the kernel's struct size
makes the copy helper verify the extra bytes are zero, scanning that excess
in one uninterruptible pass; a multi-gigabyte value over zeroed user memory
trips the soft-lockup watchdog.
A large entry_num is the other half, driving the backend invalidation loop
with no reschedule. The VT-d nested handler, for one, copies each entry and
flushes caches per iteration, pinning the CPU on a non-preemptible kernel.
Cap both in the ioctl. entry_len is held under PAGE_SIZE, above any request
struct, and entry_num under 1 << 19, the order of a hardware invalidation
queue and well beyond any real batch, bounding the per-call loop length. |
| When processing HTTP/2 SETTINGS frames, transport will enter an infinite loop of writing CONTINUATION frames if it receives a SETTINGS_MAX_FRAME_SIZE with a value of 0. |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Proton-Dotnet: through 1.0.0.
Users are recommended to upgrade to version 1.1.0, which fixes the issue. |
| unicodedata.normalize() can take excessive CPU time when processing
specially crafted Unicode input containing long runs of combining characters
with alternating Canonical Combining Class values.
This affects all normalization forms. |
| Mermaid is a JavaScript tool that uses Markdown-inspired text to create and modify diagrams and charts. From version 11.6.0 until 11.16.1, Mermaid Radar Diagrams allow arbitrary large values for the ticks parameter, which can cause high CPU usage and freeze the rendering webpage or JavaScript process for long periods of time, potentially until the process is killed from memory exhaustion. This issue is fixed in version 11.16.1. |
| A vulnerability in the Extensible Messaging Client Protocol (XMCP), also referred to as the External Client protocol, of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of malformed XMCP packets. An attacker could exploit this vulnerability by sending a malformed XMCP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload unexpectedly, resulting in a DoS condition. The attacker does not need the XMCP client username to exploit this vulnerability. |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Proton-J: through 0.34.1.
Users are recommended to upgrade to version 0.35.0, which fixes the issue. |
| An authenticated attacker can craft a disposition frame with large or illegal ranges causing excessive CPU usage due to naive range handling, leading to denial of service.
This issue affects Apache Qpid Broker-J: through 10.0.1.
Users are recommended to upgrade to version 10.1.0, which fixes the issue. |
| When using the "tarfile" module with a file opened in "streaming mode" (mode="r|") the tarfile module did not properly handle EOF, making archive parsing take exponentially longer. |
| An issue was discovered in Django 5.2 before 5.2.17 and 6.0 before 6.0.8.
GeoDjango's `django.contrib.gis.geos.GEOSGeometry` is subject to a potential denial-of-service when parsing deeply nested `GEOMETRYCOLLECTION` objects supplied as well-known text (WKT), well-known binary (WKB), or hex-encoded WKB, which triggers unbounded recursion and a segmentation fault in the underlying GEOS library. Spatial field lookups and the `django.contrib.gis.forms.GeometryField` form field are also affected.
Earlier, unsupported Django series (such as 5.1.x, 5.0.x, and 4.2.x) were not evaluated and may also be affected.
Django would like to thank Andrew MacPherson and kimchunbok_ for reporting this issue. |
| axios versions from 0.28.0 before 0.33.0 and from 1.0.0 before 1.18.0 contain uncontrolled recursion in formDataToJSON (exposed as axios.formToJSON() and used internally when serializing FormData with Content-Type: application/json). When an application passes attacker-controlled FormData field names, a field name with thousands of nested bracket-delimited segments causes unbounded recursion in buildPath(), exhausting the JavaScript call stack (RangeError: Maximum call stack size exceeded) and causing denial of service for that request, or process termination in applications without appropriate error handling. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: Intel: soc-acpi-intel-mtl-match: add missing empty item
There is no links_num in struct snd_soc_acpi_mach {}, and we test
!link->num_adr as a condition to end the loop in hda_sdw_machine_select().
So an empty item in struct snd_soc_acpi_link_adr array is required. |
| Circular symbolic links in phar archives could lead to unbounded recursion, exhausting the C stack and crashing the PHP process, in PHP versions from 8.2.* before 8.2.33, from 8.3.* before 8.3.33, from 8.4.* before 8.4.24, and from 8.5.* before 8.5.9. |
