| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix writethrough to use collection offload
Fix writethrough write to set NETFS_RREQ_OFFLOAD_COLLECTION on the request
so that collection is processed asynchronously rather than only right at
the end - and also so that asynchronous O_SYNC writes get collected at all. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: sch_teql: Introduce slaves_lock to avoid race condition and UAF
The teql master->slaves singly linked list is not protected against
multiple writes. It can be mod'ed concurently from teql_master_xmit(),
teql_dequeue(), teql_init() and teql_destroy() without holding any list
lock or RCU protection.
zdi-disclosures@trendmicro.com has demonstrated that the qdisc is freed
after an RCU grace period, but teql_master_xmit() running on another
CPU can still hold a stale pointer into the list, resulting in a
slab-use-after-free:
BUG: KASAN: slab-use-after-free in teql_master_xmit+0xf0f/0x16b0
Read of size 8 at addr ffff888013fb0440 by task poc/332
Freed 512-byte region [ffff888013fb0400, ffff888013fb0600) (kmalloc-512)
The fix?
Add a per-master slaves_lock spinlock that serializes all mutations of
master->slaves and the NEXT_SLAVE() links in teql_destroy() and
teql_qdisc_init(). teql_master_xmit() also takes the same slaves_lock
around those updates.
Annotate master->slaves and the per-slave ->next pointer with __rcu and
use the appropriate RCU accessors everywhere they are touched:
rcu_assign_pointer() on the writer side (under slaves_lock),
rcu_dereference_protected() for the writer-side loads (also under
slaves_lock), rcu_dereference_bh() for the loads in teql_master_xmit() and
rtnl_dereference() for the loads in teql_master_open()/teql_master_mtu(),
which run under RTNL.
Pair this with rcu_read_lock_bh()/rcu_read_unlock_bh() around the list
traversal in teql_master_xmit(), so that readers either observe a fully
linked list or are deferred until the in-flight mutation completes. The two
early-return paths in teql_master_xmit() are updated to release the RCU-bh
read-side critical section before returning, since leaving it held would
disable BH on that CPU for good. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/bnxt_re: Avoid repeated requests to allocate WC pages
Applications can request multiple WC pages for the same ucontext.
As of now, only 1 WC page per ucontext is supported. Add a lock to
avoid concurrent access and a check to fail repeated requests.
Also, if the mmap entry insert fails for the WC, free the Doorbell
page index mapped for the WC page. |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Block region delete during region creation
Expand the range lock, rename it "regions_lock", to disable region deletion
in the critical period between construct_region() and attach_target(), as
well as the period between device_add() and registering the remove actions.
Otherwise, userspace can confuse the kernel. It can violate the assumption
the region stays registered through the completion of cxl_add_to_region().
It can violate the assumption that devm_add_action_or_reset() is working
with a live 'struct cxl_region'.
It is ok for the region to disappear outside of those windows as that
mirrors device hotplug flows where the proper locks are held. |
| In the Linux kernel, the following vulnerability has been resolved:
xprtrdma: Initialize re_id before removal registration
rpcrdma_create_id() registers ep->re_rn with the rpcrdma ib_client
before returning the new rdma_cm_id to rpcrdma_ep_create(). However
rpcrdma_ep_create() currently stores that pointer in ep->re_id only
after rpcrdma_create_id() returns.
A local administrator can race an NFS/RDMA mount against RDMA device
removal. If rpcrdma_remove_one() observes the just-registered
notification before rpcrdma_ep_create() assigns ep->re_id,
rpcrdma_ep_removal_done() calls trace_xprtrdma_device_removal(NULL).
The tracepoint dereferences id->device->name and copies
id->route.addr.dst_addr, so the callback can crash the kernel with a
NULL pointer dereference.
Store the rdma_cm_id in ep->re_id immediately before publishing
ep->re_rn. The existing error path still destroys the id directly if
registration fails; ep is then freed by the caller without using
ep->re_id. Remove the later duplicate assignment in rpcrdma_ep_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/region: Resolve region deletion races
Sungwoo noticed that the sysfs trigger to delete a region may try to delete
a region multiple times. It also has no exclusion relative to the kernel
releasing the region via CXL root device teardown.
Instead of installing new cxl root devres actions per region, use the
existing root decoder unregistration event to remove all remaining regions.
An xarray of regions replaces a devres list of regions.
This handles 3 separate issues with the old approach:
1/ sysfs users racing to delete the same region: no longer possible now
that the regions_lock is held over the lookup and deletion.
2/ multiple actions triggering deletion of the same region: solved by
erasing regions while holding @regions_lock, and only proceeding on
successful erasure.
3/ userspace racing devres_release_all() to trigger the devres not found
warning: solved by sysfs unregistration not requiring a release action |
| In the Linux kernel, the following vulnerability has been resolved:
net: fib_rules: Don't dump dying fib_rule in fib_rules_dump().
rocker_router_fib_event() calls fib_rule_get() during RCU dump.
If the fib_rule is dying, refcount_inc() will complain about it.
Let's call refcount_inc_not_zero() in fib_rules_dump(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: addrconf: bail out of dad_failure when state is no longer POSTDAD
addrconf_dad_failure() transitions ifp->state from DAD to POSTDAD
via addrconf_dad_end(), which drops ifp->lock on return. The lock
is re-acquired after net_info_ratelimited(). A concurrent
ipv6_del_addr() can take the lock in that window, set ifp->state
to DEAD and run list_del_rcu(&ifp->if_list).
addrconf_dad_failure() then overwrites DEAD with ERRDAD at errdad:
and schedules a new dad_work. The work calls ipv6_del_addr()
again, hitting the already-poisoned list entry:
general protection fault: 0000 [#1] SMP NOPTI
CPU: 4 PID: 217 Comm: kworker/4:1
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:ipv6_del_addr+0xe9/0x280
RAX: dead000000000122
Call Trace:
addrconf_dad_stop+0x113/0x140
addrconf_dad_work+0x28c/0x430
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
ret_from_fork+0x35/0x40
Fold the addrconf_dad_end() logic into addrconf_dad_failure() under
a single ifp->lock critical section. The STABLE_PRIVACY branch
temporarily drops ifp->lock around address regeneration, so at
lock_errdad: verify the state is still POSTDAD before transitioning
to ERRDAD; bail out otherwise to avoid overwriting a state set by
another path while the lock was released. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Wait on external BO kernel fences in exec IOCTL
Before arming a user job, xe_exec_ioctl() only added the VM's
dma-resv KERNEL slot as a dependency. That slot covers rebinds and
the kernel operations of the VM's private BOs, but not external BOs
(bo->vm == NULL), which carry their kernel operations (evictions,
moves, ...) in their own dma-resv KERNEL slot.
The DMA_RESV_USAGE_KERNEL slot is the cross-driver contract for
memory management operations that must complete before the BO or its
backing store may be used: any accessor is required to wait on the
KERNEL fences before touching the resv. By skipping the external BOs'
KERNEL slots, the exec path violated that contract and could schedule
a user job while a kernel operation on an external BO mapped by the VM
was still in flight, racing against it and potentially reading or
writing memory that was being moved.
Replace the VM-only dependency with an iteration over every object
locked by the exec, adding each object's KERNEL slot as a job
dependency. This covers the VM resv (rebinds and private BOs) as well
as every external BO, mirroring the drm_gpuvm_resv_add_fence() call
that later publishes the job fence to the same set of objects.
Long-running mode continues to skip this, as before.
(cherry picked from commit a6b842acf3ddd1efc53a56de9260cfa718fb35e7) |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Cancel special fields on map value recycle
Map update and delete paths currently call bpf_obj_free_fields() when a
value is being replaced or recycled. That makes field destruction depend
on the context of the update/delete operation. For tracing programs this
can include NMI context, where referenced kptr destructors, uptr
unpinning, and graph root destruction are not generally safe.
Introduce bpf_obj_cancel_fields() for the reusable-value path. It only
performs NMI-safe cleanup for timer, workqueue, and task_work fields.
Fields that need full destruction are left attached to the recycled value
and are destroyed by the final cleanup path instead.
Switch array and hashtab update/delete/recycle paths to this cancel
helper. Keep bpf_obj_free_fields() for final map destruction and for
bpf_mem_alloc destructors. Preallocated hashtabs do not have allocator
destructors, so teardown continues to walk the normal and extra elements
and fully destroy their fields.
This deliberately relaxes the eager-free semantics of map update/delete
for special fields. Programs that relied on a recycled map slot becoming
empty immediately after update/delete were relying on behavior that
cannot be implemented safely from every BPF execution context without
offloading arbitrary destructors.
There is a chance this change breaks programs making assumptions
regarding the eager freeing of fields. If so, we can relax semantics to
cancellation only when irqs_disabled() is true in the future. However,
theoretically, map values that get reused eagerly already have weaker
guarantees as parallel users can recreate freed fields before the new
element becomes visible again. |
| In the Linux kernel, the following vulnerability has been resolved:
configfs: fix lockless traversals of ->s_children
Having the parent directory locked protects entries from removal
by another thread, but it does *not* protect cursors from being
moved around by lseek() - or freed, for that matter. |
| In the Linux kernel, the following vulnerability has been resolved:
nvdimm/btt: Handle preemption in BTT lane acquisition
BTT lanes serialize access to per-lane metadata and workspace state
during BTT I/O. The btt-check unit test reports data mismatches during
BTT writes due to a race in lane acquisition that can lead to silent
data corruption.
The existing lane model uses a spinlock together with a per-CPU
recursion count. That recursion model stopped being valid after BTT
lanes became preemptible: another task can run on the same CPU,
observe a non-zero recursion count, bypass locking, and use the same
lane concurrently.
BTT lanes are also held across arena_write_bytes() calls. That path
reaches nsio_rw_bytes(), which flushes writes with nvdimm_flush().
Some provider flush callbacks can sleep, making a spinlock the wrong
primitive for the lane lifetime.
Replace the spinlock-based recursion model with a dynamically
allocated per-lane mutex array and take the lane lock
unconditionally.
Add might_sleep() to catch any future atomic-context caller.
Found with the ndctl unit test btt-check.sh. |
| In the Linux kernel, the following vulnerability has been resolved:
OPP: Fix race between OPP addition and lookup
A race exists between dev_pm_opp_add_dynamic() and
dev_pm_opp_find_freq_exact():
CPU0 (add) CPU1 (lookup)
------------------------------- ------------------------------
_opp_add()
mutex_lock()
list_add(&new_opp->node, head)
mutex_unlock() _opp_table_find_key()
mutex_lock()
dev_pm_opp_get(opp)
kref_get()
mutex_unlock()
kref_init(&new_opp->kref)
dev_pm_opp_put()
kref_put_mutex()
The newly added OPP is inserted into the list before its kref is
initialized. A concurrent lookup can find this OPP and increment its
reference count while it is still uninitialized, leading to refcount
corruption and a potential premature free.
Fix this by initializing ->kref and ->opp_table before making the OPP
visible via list_add(). This ensures any concurrent lookup observes a
fully initialized object.
[ Viresh: Updated commit log ] |
| In the Linux kernel, the following vulnerability has been resolved:
qede: sync udp_tunnel ports outside qede_lock in the recovery path
A TX timeout on a qede NIC that has VXLAN/GENEVE tunnel ports
configured wedges the rtnetlink control plane of the whole machine:
NETDEV WATCHDOG: ens6f1 (qede): transmit queue 2 timed out 10226 ms
[qede_tx_timeout:586(ens6f1)]TX timeout on queue 2!
[qede_recovery_handler:2665(ens6f0)]Starting a recovery process
The recovery path deadlocks on the driver's own mutex:
qede_sp_task
rtnl_lock()
mutex_lock(&edev->qede_lock) <- taken
qede_recovery_handler
qede_load
udp_tunnel_nic_reset_ntf
__udp_tunnel_nic_device_sync
info->sync_table == qede_udp_tunnel_sync
mutex_lock(&edev->qede_lock) <- same task: deadlock
The mutex is not recursive, so the kworker blocks on itself with
rtnl_lock held, and neither lock is ever released. Every task that
calls rtnl_lock() afterwards (ip, ovs-vswitchd, lldpad, IPv6
addrconf, sshd) blocks forever while the node still answers ping.
In a vmcore from an affected production node rtnl_mutex.owner
decodes to the very kworker blocked at the innermost mutex_lock()
above.
Re-sync the tunnel ports from qede_sp_task() after the internal lock
is dropped, still under rtnl_lock as the udp_tunnel API requires.
This mirrors qede_open(), which calls udp_tunnel_nic_reset_ntf()
under rtnl without the internal lock.
qede_recovery_handler() now returns whether it has successfully
reloaded an open device, and the caller re-syncs the ports only in
that case. This keeps the old gating exactly: a device that was down
or a failed recovery returns false, as those paths never reached the
udp_tunnel_nic_reset_ntf() call before either.
This was the only user of the qede_lock()/qede_unlock() helpers, so
remove them. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: hold event_mutex while checkpointing CRIU events
kfd_criu_checkpoint_events() counts the entries in p->event_idr via
kfd_get_num_events(), allocates an array sized to that count, and then
walks the same IDR to fill it. Neither the count nor the walk holds
p->event_mutex.
The CRIU checkpoint caller holds only p->mutex. Event create and destroy
(kfd_event_create()/kfd_event_destroy()) take p->event_mutex and do not
take p->mutex, so a second thread in the same process can insert or remove
events between the count and the walk. If an event is inserted, the walk
iterates more entries than were counted and writes past the end of the
ev_privs allocation; if an event is removed, the walk dereferences an
entry that is being freed.
Hold p->event_mutex across the count and the walk so both observe a
consistent view of p->event_idr. The lock is released before
copy_to_user(), which only touches the local buffer. The caller already
holds p->mutex and the create/destroy paths never take p->mutex, so the
p->mutex -> p->event_mutex order is not inverted and no deadlock is
introduced.
(cherry picked from commit ff57e223ab105795b05d3ef3f3c35a5a441bcbaa) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: ISO: fix refcounting of iso_conn
iso_conn_del() and iso_chan_del() have a race that results to double-put
of iso_conn:
[Task hdev->workqueue] [Task 2]
iso_conn_del iso_chan_del
iso_conn_hold_unless_zero iso_conn_lock
iso_conn_lock conn->sk = NULL
iso_conn_unlock
sk = iso_sock_hold(conn) <---------ยด
if (!sk) iso_conn_put iso_conn_put
iso_conn_put /* UAF */
The extra put for !sk in iso_conn_del() is currently required since
failing iso_chan_add() may leave iso_conn not associated with any sk.
Fix by having iso_pi(sk)->conn own refcount when non-NULL, so
iso_conn_del does not need to put it. Adjust the iso_conn_add()
refcounting so that conn is put if it does not get associated with an
sk. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: mgmt: fix pending command UAF in EIR updates
MGMT_OP_SET_LOCAL_NAME is handled asynchronously on powered controllers
and can run set_name_sync(). When the controller is BR/EDR capable,
set_name_sync() updates the local name and then rebuilds EIR data through
eir_create(). The EIR builder walks hdev->uuids, but the UUID list can
be changed and entries can be freed by MGMT_OP_ADD_UUID and
MGMT_OP_REMOVE_UUID.
pending_eir_or_class() is meant to serialize management commands that
can change EIR or the class of device, but it did not include
MGMT_OP_SET_LOCAL_NAME. In addition, it walked hdev->mgmt_pending
without hdev->mgmt_pending_lock even though pending commands are added
and removed under that mutex. A racing command completion can therefore
remove and free a pending command while pending_eir_or_class() is still
inspecting it, leading to a use-after-free in the pending-command list or
allowing a local name update to rebuild EIR while UUID entries are being
removed.
Take hdev->mgmt_pending_lock while scanning hdev->mgmt_pending and treat
MGMT_OP_SET_LOCAL_NAME as an EIR/class-affecting pending command on the
powered asynchronous path. Check for a conflicting pending command before
copying the new short name so a rejected SET_LOCAL_NAME request does not
modify hdev->short_name. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: do not update comments from kernel-side hash adds
mtype_resize() copies comment pointers with memcpy(), not the comment
objects themselves. During the window after an entry has been copied but
before the table swap and backlog replay, the old table is still
published for packet-side updates while the replacement-table entry
already holds the same ip_set_comment_rcu pointer.
If xt_SET --add-set ... --exist hits that old entry in this window,
mtype_add() calls ip_set_init_comment() even though packet-side adds
carry no comment payload. That call frees the shared comment through the
old entry, so the replacement-table entry now holds a stale pointer.
When the queued add is replayed on the new table, mtype_add() calls
ip_set_init_comment() again and strlen() dereferences the stale pointer.
Fix this in mtype_add() by skipping ip_set_init_comment() when
ext->target marks a packet-side add. Userspace adds still update
comments, while packet-side adds can no longer free comment storage
shared with a resize copy. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: libsas: Fix HA resume deadlock and hisi_sas disk-wake race
Commit fbefe22811c3 ("scsi: libsas: Don't always drain event workqueue
for HA resume") introduced sas_resume_ha_no_sync() to avoid a deadlock:
the PHYE_RESUME_TIMEOUT handler, running on the HA event workqueue,
calls sas_deform_port() -> sas_destruct_devices(), which removes SCSI
devices and waits for the host to become runtime-active. But the host
cannot resume until sas_resume_ha() -> sas_drain_work() returns, and the
drain is blocked on that very handler.
However skipping the drain reintroduces a race: hisi_sas returns from
resume before all PHY UP work and libsas discovery work finish. The
controller may then autosuspend while disks are still waking up. The
disks issue IO to a suspended controller, the IO fails, and the disks
get disabled.
Fix the deadlock at its source by moving the PHYE_RESUME_TIMEOUT
notification to after sas_drain_work(). By then the host resume is about
to complete, so device removal through device_link no longer blocks on
the resume and the cycle is broken.
With the deadlock gone, restore sas_resume_ha() (the draining variant)
in hisi_sas and remove sas_resume_ha_no_sync().
The reorder is safe for the other libsas consumers (isci, pm8001,
aic94xx, mvsas). During suspend, sas_suspend_devices() calls
sas_notify_lldd_dev_gone() for each device, which sets dev->lldd_dev to
NULL. When scsi_unblock_requests re-enables I/O in resume, any I/O to a
timed-out phy's disk is immediately rejected by the LLDD before reaching
hardware: isci returns SAS_DEVICE_UNKNOWN (mapped to DID_BAD_TARGET),
and pm8001 returns SAS_PHY_DOWN (mapped to DID_NO_CONNECT). Both
complete directly via scsi_done() without entering SCSI EH. This is
identical in both the old and new ordering since lldd_dev_gone runs
during suspend, before resume. The reorder only affects when the
PHYE_RESUME_TIMEOUT handler runs (synchronized by sas_drain_work()
vs. asynchronous after resume returns), not whether I/O can reach the
device. aic94xx and mvsas do not register any PM ops and never reach
this code path. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Fix race between LPI release and re-registration
Fix a potential race between decrementing an LPI's reference count and
evicting that structure from the LPI xarray.
LPI structures are maintained in the VGIC LPI xarray (dist->lpi_xa).
When the reference count of an LPI structure drops to zero,
vgic_release_lpi_locked() removes the structure from the xarray and
frees it under the xarray lock.
However, the release of an LPI can race with a concurrent LPI
re-registration with the same INTID via vgic_add_lpi() on another CPU,
since the reference count drop and the xarray eviction are not performed
in a single atomic step. This can happen e.g. if the guest issues a
DISCARD while the LPI is still referenced from a vCPU's active-pending
list (ap_list), and the same INTID is re-mapped via MAPTI.
Particularly, vgic_release_lpi_locked() is called from two distinct
paths: direct release via vgic_put_irq(), and deferred release via
vgic_release_deleted_lpis(). During direct release, the issue can result
in deleting a newly registered LPI from the xarray:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq()
__vgic_put_irq()
refcount_dec_and_test()
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(old_irq) == false
new IRQ inserted --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
xa_lock_irqsave();
vgic_release_lpi_locked()
__xa_erase(.., irq->intid) <-- BUG: new IRQ is erased
kfree_rcu(old_irq)
During the deferred release path, the old IRQ can be leaked:
CPU0 (Releasing LPI) CPU1 (Adding new LPI)
==================== =====================
vgic_put_irq_norelease()
__vgic_put_irq()
refcount_dec_and_test()
irq->pending_release = true
vgic_add_lpi()
xa_lock_irqsave()
old_irq = xa_load(.., intid)
vgic_try_get_irq_ref(oldirq) == false
BUG: old IRQ overwritten --> __xa_store(.., intid, ..)
xa_unlock_irqrestore()
vgic_release_deleted_lpis()
xa_lock_irqsave()
xa_for_each() { .. } <-- old IRQ with pending_release = true
is gone, so it cannot be released
To fix the direct release path, move the reference count drop inside
the xarray lock, making sure that vgic_add_lpi() never encounters the
to-be-released LPI.
In the deferred release path, the refcount drop must happen under a raw
spinlock, so the xarray lock cannot be grabbed, and the same solution
does not work. Instead, update vgic_add_lpi(), so that if it evicts
an LPI from the xarray, it takes on the responsibility of freeing it.
Consequently, an LPI may now be freed concurrently after a deferred
release drops the refcount, so accessing the pending_release field is no
longer safe from use-after-free. Delete all uses of the flag, and update
vgic_release_deleted_lpis() to identify orphaned LPIs purely based on
their refcount. |
