| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Preserve pointer spill metadata during half-slot cleanup
__clean_func_state() cleans dead stack slots in 4-byte halves. When the
high half of a STACK_SPILL slot is dead and the low half remains live,
cleanup converts the live low half to STACK_MISC or STACK_ZERO and clears
the saved spilled_ptr metadata.
That conversion is safe only for scalar spills. For a pointer spill, this
metadata clear lets a later 32-bit fill from the still-live half avoid the
normal non-scalar register-fill check and be treated as an ordinary scalar
stack read.
Leave non-scalar spill slots intact in this half-live shape. This is
conservative for pruning and preserves the existing
check_stack_read_fixed_off() rejection path for partial fills from pointer
spills. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: marvell/octeontx - fix DMA cleanup using wrong loop index
The sg_cleanup path used list[i] instead of list[j] when unmapping DMA
buffers, leaking successfully mapped entries and repeatedly unmapping
the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_meta_bridge: fix NFT_META_BRI_IIFPVID stack leak
This needs to test for nonzero retval. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Fix kernel heap address leak in bounce_error_event()
The comment above bounce_error_event() documents that user clients
should receive SNDRV_SEQ_EVENT_BOUNCE with the original event embedded
as variable-length data, while kernel clients should receive
SNDRV_SEQ_EVENT_KERNEL_ERROR with a quoted kernel pointer.
However, the implementation unconditionally uses
SNDRV_SEQ_EVENT_KERNEL_ERROR with data.quote.event set to the raw
struct snd_seq_event pointer for all clients. When a bounce error
event is delivered to a USER_CLIENT via snd_seq_read(), the kernel
heap address in data.quote.event is exposed to userspace through
copy_to_user() in the fixed-length branch.
This is a distinct leak path from the one addressed by commit
705dd6dcbc0e ("ALSA: seq: Clear variable event pointer on read"),
which sanitizes data.ext.ptr in the variable-length branch of
snd_seq_read(). The bounce_error_event() leak uses fixed-length
events that take the else branch where no sanitization occurs.
Differentiate the bounce event by client type. For USER_CLIENT,
send SNDRV_SEQ_EVENT_BOUNCE with SNDRV_SEQ_EVENT_LENGTH_VARIABLE
and data.ext pointing to the original event. The variable-length
path in snd_seq_event_dup() copies the event data into chained
cells, and snd_seq_expand_var_event() copies only the content --
never the pointer -- to userspace. For KERNEL_CLIENT, keep the
existing SNDRV_SEQ_EVENT_KERNEL_ERROR behavior with the quoted
pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: magnetometer: ak8975: fix potential kernel stack memory leak
Currently in the AK8975 driver there are four instances where potential
uninitialized kernel stack memory leaks can occur. If
i2c_smbus_read_i2c_block_data_or_emulated() returns a value less than
the size of the buffer, uninitialized bytes are retained in the buffer
and later the buffer is passed on to IIO buffers, potentially leaking
memory to userspace.
Fix this by adding checks whether the return value of the function is
equal to the size of the buffer and subsequently if the value is
lesser than zero to distinguish from a returned error code. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mpls: initialize rtm_tos in mpls_getroute()
mpls_getroute() builds the RTM_NEWROUTE reply to an RTM_GETROUTE
request by filling a struct rtmsg allocated from an skb whose data
area is not zeroed (alloc_skb(NLMSG_GOODSIZE, ...)). It sets every
field of the header except rtm_tos:
r = nlmsg_data(nlh);
r->rtm_family = AF_MPLS;
r->rtm_dst_len = 20;
r->rtm_src_len = 0;
r->rtm_table = RT_TABLE_MAIN;
r->rtm_type = RTN_UNICAST;
r->rtm_scope = RT_SCOPE_UNIVERSE;
r->rtm_protocol = rt->rt_protocol;
r->rtm_flags = 0;
struct rtmsg has no padding, so the one uninitialised byte rtm_tos
(offset 3) is copied straight to user space on recvmsg(), leaking a
byte of uninitialised heap memory. This is in contrast to
mpls_dump_route(), which fills the very same header and does set
rtm_tos = 0.
Initialize rtm_tos to 0, matching mpls_dump_route().
Reproduced with KMSAN by adding an MPLS route and issuing a
non-RTM_F_FIB_MATCH RTM_GETROUTE for its label:
BUG: KMSAN: kernel-infoleak in _copy_to_iter+0x36c/0x33f0
_copy_to_iter+0x36c/0x33f0
__skb_datagram_iter+0x196/0x12c0
skb_copy_datagram_iter+0x5b/0x210
netlink_recvmsg+0x37b/0xef0
...
Uninit was created at:
__alloc_skb+0x8ca/0x10e0
mpls_getroute+0x1280/0x3a40
rtnetlink_rcv_msg+0x1138/0x15a0
...
Byte 19 of 64 is uninitialized
(byte 19 = nlmsghdr(16) + rtmsg offset 3 = rtm_tos) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: usb-audio: fix stack info leak in RME Digiface status
snd_rme_digiface_read_status() reads a four-word status block from the
device into an uninitialised on-stack __le32 buf[4] and, whenever the
vendor control-IN transfer does not return a negative error, copies all
four words into the caller's status[].
snd_usb_ctl_msg() copies the full requested size back into the caller's
buffer regardless of how many bytes the data stage actually delivered:
buf = kmemdup(data, size, GFP_KERNEL);
err = usb_control_msg(dev, pipe, request, requesttype,
value, index, buf, size, timeout);
memcpy(data, buf, size);
usb_control_msg() returns the transferred length on a short control-IN,
which is a non-negative value, and writes only that many bytes. The
remainder of the copy back is the kmemdup()ed image of the caller's
buffer, so a device answering with a short data stage leaves the
trailing words of buf[] holding leftover kernel stack. The only guard
in the caller is err < 0, so those words are stored into status[].
They then reach user space: snd_rme_digiface_get_status_val() selects a
16-bit halfword of status[] per the control's reg/mask, and the eight
Digiface status controls together expose the whole 16-byte frame to an
unprivileged reader of /dev/snd/controlC*.
Zero-initialise the buffer so a short read yields zeros instead of stack
residue. This mirrors snd_rme_get_status1(), which already clears its
output word before the same kind of vendor read.
Discovered by XBOW, triaged by Baul Lee <baul.lee@xbow.com> |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Update x2APIC MSR intercepts if AVIC is inhibited while L2 is active
Always update x2APIC MSR intercepts for L1 when AVIC is deactivated, even
if L2 is active and KVM is using a separate MSR bitmap to run L2. If AVIC
is fully enabled prior to running L2, and is then inhibited while L2 is
active (for a VM-scoped inhibit), then KVM will run L1 with AVIC disabled,
but with x2APIC MSR intercepts disabled, i.e. will allow L1 to read most of
the host's APIC state, send arbitrary interrupts, change task priority, and
ultimately trivially DoS the host.
E.g. sending a self-IPI in L1 on HYPERV_REENLIGHTENMENT_VECTOR, 0xee, with
CONFIG_HYPERV=n in the host kernel as a "safe" PoC, yields:
Spurious interrupt (vector 0xee) on CPU#425. Acked
And hacking KVM to abuse kvm_set_posted_intr_wakeup_handler() to register a
handler and WARN on POSTED_INTR_WAKEUP_VECTOR yields:
------------[ cut here ]------------
WARNING: arch/x86/kvm/svm/svm.c:5594 at pi_wakeup_handler+0x9/0x10 [kvm_amd], CPU#156: nested_x2apic_t/316940
CPU: 156 UID: 0 PID: 316940 Comm: nested_x2apic_t Tainted: G S U
Tainted: [S]=CPU_OUT_OF_SPEC, [U]=USER
Hardware name: Google Astoria-Turin/astoria, BIOS 0.20260209.0-0 02/09/2026
RIP: 0010:pi_wakeup_handler+0x9/0x10 [kvm_amd]
Call Trace:
<IRQ>
sysvec_kvm_posted_intr_wakeup_ipi+0x64/0x80
</IRQ>
<TASK>
asm_sysvec_kvm_posted_intr_wakeup_ipi+0x1a/0x20
RIP: 0010:vcpu_run+0x1430/0x1e40 [kvm]
kvm_arch_vcpu_ioctl_run+0x2c1/0x600 [kvm]
kvm_vcpu_ioctl+0x580/0x6b0 [kvm]
__se_sys_ioctl+0x6d/0xb0
do_syscall_64+0x10a/0x480
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x46ff4b
</TASK>
---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
s390/zcrypt: Close speculative mem read possibility
The domain value is extracted from a given CCA or EP11 ioctl struct
when a CPRB is about to be sent. Thus this is a user controlled value.
Under some special conditions (custom device node used, administrative
load) this value is used as an array index after bounds checking, but
without speculation barrier.
Add the missing array_index_nospec() call to prevent speculative
execution where this domain value is used. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Clear variable event pointer on read
snd_seq_read() copies a queued variable-length event header to userspace
before expanding the payload. Queued variable-length events use
SNDRV_SEQ_EXT_CHAINED internally, and data.ext.ptr points at the first
extension cell.
The read side strips SNDRV_SEQ_EXT_* bits from data.ext.len before the
copy, but it leaves data.ext.ptr untouched. A userspace sequencer client
can therefore write a direct variable event to itself and read back the
extension-cell kernel address from the returned header.
Clear the temporary header pointer before copy_to_user(). The original
queued event remains unchanged and is still passed to
snd_seq_expand_var_event(), so payload expansion keeps using the
internal chain. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mask pseudo pointer values in verifier logs
print_bpf_insn() masks ldimm64 immediates for pointer-bearing pseudo
sources when pointer leaks are not allowed, but the mask only covers
BPF_PSEUDO_MAP_FD and BPF_PSEUDO_MAP_VALUE.
BPF_PSEUDO_MAP_IDX, BPF_PSEUDO_MAP_IDX_VALUE, and BPF_PSEUDO_BTF_ID can
also be resolved to kernel pointer values before the verifier log prints
the instruction. Include them in the existing pointer classification so
the log prints 0x0 instead of the rewritten address. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/x86/amd/brs: Fix kernel address leakage
A user-only branch stack can contain branches that originate from
the kernel. As a result, kernel addresses are exposed to user space
even when PERF_SAMPLE_BRANCH_USER is requested. On AMD processors
supporting X86_FEATURE_BRS (Zen 3 only), perf can still report entries
such as SYSRET/interrupt returns for which the branch-from addresses
are in the kernel.
E.g.
$ perf record -j any,u -c 4000 -e branch-brs -o - -- \
perf bench syscall basic --loop 1000 | \
perf script -i - -F brstack|tr ' ' '\n'| \
grep -E '0x[89a-f][0-9a-f]{15}'
...
0xffffffff810001c4/0x72e2e32955eb/-/-/-/0//-
0xffffffff810001c4/0x72e2d94a9821/-/-/-/0//-
0xffffffff810001c4/0x72e2d94ffa1b/-/-/-/0//-
...
BRS provides no hardware branch filtering, so privilege level
filtering is performed entirely in software. However, amd_brs_match_plm()
only validates the branch-to address against the requested privilege
levels. For branches from the kernel to user space, the branch-from
address is left unchecked and is leaked. Extend the software filter to
also validate the branch-from address, so that any branch record whose
branch-from address is in the kernel is dropped when
PERF_SAMPLE_BRANCH_USER is requested. |
| In the Linux kernel, the following vulnerability has been resolved:
VDUSE: avoid leaking information to userspace
The bounceing is not necessarily page aligned, so current VDUSE can
leak kernel information through mapping bounce pages to
userspace. Allocate bounce pages with __GFP_ZERO to avoid leaking
information to userspace. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix overflow in passthrough ioctl bounds check
smb2_ioctl_query_info() validates the PASSTHRU_FSCTL response payload
before copying it to userspace.
The payload offset and length both come from 32-bit fields. The bounds
check currently adds OutputOffset and qi.input_buffer_length directly, so
the addition can wrap in 32-bit arithmetic before the result is compared
against the response buffer length.
A malicious server can use a large OutputOffset and a small OutputCount
to make the wrapped sum pass the bounds check. The later copy_to_user()
then reads from io_rsp + OutputOffset, outside the response buffer.
Use size_add() for the offset plus length check so overflow is treated as
out of bounds. |
| In the Linux kernel, the following vulnerability has been resolved:
ieee802154: admin-gate legacy LLSEC dump operations
In net/ieee802154/netlink.c, the legacy IEEE802154_NL family ops table
builds the LLSEC dump entries (LLSEC_LIST_KEY, LLSEC_LIST_DEV,
LLSEC_LIST_DEVKEY, LLSEC_LIST_SECLEVEL) with IEEE802154_DUMP() which
sets no .flags, so generic netlink runs them ungated. The modern
nl802154 family admin-gates the equivalent reads via
NL802154_CMD_GET_SEC_KEY and friends with .flags = GENL_ADMIN_PERM.
Any local uid that can open AF_NETLINK / NETLINK_GENERIC can resolve
the "802.15.4 MAC" family and dump LLSEC_LIST_KEY on any wpan netdev
that has an LLSEC key installed; the dump handler writes the raw
16-byte AES-128 key bytes (IEEE802154_ATTR_LLSEC_KEY_BYTES, copied
verbatim from struct ieee802154_llsec_key.key) into the reply.
Recovering the AES key compromises 802.15.4 LLSEC link confidentiality
and authenticity, since LLSEC uses CCM* and the same key authenticates
and encrypts frames.
Impact: any local uid with no capabilities can read the raw 16-byte
AES-128 LLSEC key from the kernel keytable on any wpan netdev that has
an administrator-installed LLSEC key, by issuing an LLSEC_LIST_KEY
dump on the legacy IEEE802154_NL generic-netlink family.
Introduce IEEE802154_DUMP_PRIV() mirroring IEEE802154_DUMP() but
setting .flags = GENL_ADMIN_PERM, and use it for the four LLSEC dump
entries. LIST_PHY and LIST_IFACE retain IEEE802154_DUMP() because the
modern nl802154 family exposes their equivalents to unprivileged
readers by design (NL802154_CMD_GET_WPAN_PHY and
NL802154_CMD_GET_INTERFACE carry "can be retrieved by unprivileged
users" annotations). |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: Charge unstable writes by request size, not folio size
nfs_folio_mark_unstable() and nfs_folio_clear_commit() charge and
uncharge NR_WRITEBACK/WB_WRITEBACK by folio_nr_pages(folio) once per
*request* added to or removed from a commit list. This is correct only
when a folio has a single associated request. When pg_test splits a
folio into N sub-folio requests (e.g. pNFS flexfiles striping with a
stripe unit smaller than the folio size, or plain wsize-limited
splitting), each of the N requests independently charges the whole
folio's page count, inflating the accounting by a factor of N per
folio. With large folios and small stripe units this reaches multiple
orders of magnitude: a 2 MiB folio split into 512 4 KiB requests can
charge up to 512x its real size, pushing global dirty+writeback
accounting past the system's dirty threshold and forcing every
buffered writer on the host into the hard-throttle path, including
unrelated in-kernel NFS server threads sharing the box.
Charge each request only for the pages it actually covers. |
| In the Linux kernel, the following vulnerability has been resolved:
octeontx2-af: cn10k: restrict VF LMTLINE sharing to its own PF
rvu_mbox_handler_lmtst_tbl_setup() uses req->base_pcifunc as a direct
index into the LMT map table to read another function's LMTLINE
physical base address and copy it into the caller's own LMT map table
entry. The mailbox dispatcher authenticates req->hdr.pcifunc from the
IRQ source, but req->base_pcifunc is a separate payload field and is
not sanitized.
Reject the request with -EPERM when a VF caller's base_pcifunc is not a
valid function under its own PF. is_pf_func_valid() bounds the FUNC field
to the PF's configured VF count, keeping the computed index inside the
caller's own slot block. |
| The Simply Schedule Appointments WordPress plugin before 1.6.12.17 does not restrict the user records returned by some of its REST endpoints to those the requester is entitled to see, allowing users with a low-privileged staff role to disclose the names and email addresses of arbitrary registered users. |
| Repository migration SSRF via multi-answer DNS allow-list bypass |
| Missing Authorization and Authorization Bypass Through User-Controlled Key and Incorrect Permission Assignment for Critical Resource and Exposure of Sensitive Information to an Unauthorized Actor in code.gitea.io/gitea |
